Category: Blog

This year, Mattel and Amazon MGM give us a brand-new look at the eagerly awaited Masters of the Universe film thanks to their display at Brand Licensing Europe 2025 and via He-Mania! Snake Mountain, Skeletor’s vile fortress, appears beautifully jagged and sinister in the official concept art released by executives Greg Coleman and Ruth Henriquez at the [ …]…] […]

The second post Leaked Snake Mountain Design in a New He-Man movie appears on Den of Geek.

Dune Messiah has clues in this article.

Timothée Chalamet remained Paul Atreides from the beginning of Dune. However, it wasn’t until the last hours of Dune: Part Two that he changed into Paul Mu, adib. After defeating House Harkonnen and defying CHOAM, Paul resurrected as the fresh Padishah Emperor. With his beautiful wavy hair dangling over his flashing eyes, his aggressive position, and, most importantly, his new position, Chalamet embodied Paul&#8217.

We understand why some people are surprised to see a new movie that the actor shared from the launch of Marty Supreme given Chalamet’s significance for the character’s future. The film, which stars Josh Safdie as the world’s top ping pong person, is already complete and set to have a Christmas transfer. With Denis Villeneuve, Chalamet is currently filming Dune: Part Three. So why does he look in that picture with his mind buzzed? What became of his gorgeous curls?

Anyone who has read the third picture Villeneuveneuve, the foundation for the answer, is distinct to understand it. Herbert’s famous offended readers who misinterpreted his first book’s caution against charismatic leaders were well known. He wrote a deep, tightly-packed tale about palace drama and a plot against the novel Emperor to counteract those who thought of Paul as some sort of hero.

The Paul of Dune Messiah is no longer the upbeat young gentleman thrust into an impossible condition. He has now launched a Fremen warfare against those who oppose his vision of the future and is a brutal leader. Where Chani leaves Paul in Dune: Part Two, disturbed by the fervor he exhibits at his victory, the film depicts her standing by her partner, despite the fact that he is essentially married to Princess Irulan.

Irulan is a member of a conspiracy against Paul that is unknown to him, including Scytale, a faceshifter ( or shapeshifter ) of the Tleilaxu, and Reverend Mother Mohiam of the Bene Gesserit, the amphibian mutant Edric of the Spacing Guild, and Edric of the Spacing Guild.

In his earlier films, Villeneuve sown some of these issues, including those involving Paul&#8217’s girl Alia and the family connection between Paul&#8217, his mother Jessica, and the Baron Harkonnen. These revelations were revealed later in the series. But, Chalamet’s hairstyle does give the most accurate information about the direction the next film will take.

Full trailers for Dune Messiah are soon to come!

Paul gathers his forces to defeat the conspirators at the finale of Dune Messiah, but not before the Tleilaxu launch their most powerful weapon, a stone heater. Paul is deaf and plagued by the rock burner, forcing him to concentrate on his prescience. The Marty Supreme video’s cut Chalamet is most likely fresh from filming those images.

People who continues to read the Dune books knows that Paul’s story doesn’t stop there. However, we’ll delay until Chalamet posts another online video before diving into those plots.

On December 18, 2026, Dune: Part Three will be in venues.

The first article on Den of Geek was Timothée Chalamet&#8217, s Bald Head Has Major Implications For Dune 3.

This essay contains Dune Messiah clues. From the beginning of Dune, Timothée Chalamet acted like Paul Atreides. He eventually became PaulMu’adib in the last moments of Dune: Part Two, though. After defeating House Harkonnen and defying CHOAM, Paul resurrected as the fresh Padishah Emperor. Chalamet embodied Paul’s fresh role.

The second article Timothée Chalamet’s Bald Head Has Major Implications For Dune 3 was published on Den of Geek.

Dune Messiah has trailers in this article.

From the beginning of Dune, Timothée Chalamet acted like Paul Atreides. However, he didn’t change his name until the last seconds of Dune: Part Two before converting to Paul Mu. After defeating House Harkonnen and defying CHOAM, Paul resurrected as the fresh Padishah Emperor. With his beautiful wavy hair dangling over his flashing eyes, his aggressive position, and, most importantly, his new position, Chalamet embodied Paul&#8217.

We understand why some people are surprised to see a new movie that the actor shared from the launch of Marty Supreme given the significance of Chalamet’s style for the character’s future. That film, in which Josh Safdie stars in Chalamet as a world champion ping tennis person, is already complete and scheduled for a Christmas transfer. With Denis Villeneuve, Chalamet is currently filming Dune: Part Three. So why does he look in that movie with his mind buzzed? What became of his stunning strands?

Anyone who has read the third picture Villeneuveneuve, the sequel to Dune, and Frank Herbert‘s movie to the same name, will understand what the answer is. Herbert’s famous offended readers who misinterpreted his first book’s caution against charismatic leaders were well known. In order to counteract those who saw Paul as some sort of warrior, he wrote a thick, strongly paced novel about castle intrigue and a plot against the new Emperor.

The Paul of Dune Messiah is no longer the upbeat young gentleman thrust into an difficult situation. He has now launched a Fremen warfare against those who oppose his vision of the future and is a brutal leader. Where Chani leaves Paul in Dune: Part Two, disturbed by the fervor he exhibits at his victory, the film depicts her standing by her partner, despite the fact that he is physically married to Princess Irulan.

Irulan is a member of a conspiracy against Paul that is unknown to him, including Scytale, a faceshifter ( or shapeshifter ) of the Tleilaxu, and Reverend Mother Mohiam of the Bene Gesserit, the amphibian mutant Edric of the Spacing Guild, and Edric of the Spacing Guild.

Villeneuve created some of these issues in his earlier films, which included disclosures that come after in the publications, such as the motivations of Paul&#8217, his sister Alia, and the interpersonal link between Paul&#8217, his mother Jessica and the Baron Harkonnen. But, Chalamet’s hair may give the most accurate information about the third film’s intended destination.

Once more: Full clues for Dune Messiah to come!

Paul gathers his forces to defeat the conspirators at Dune Messiah‘s finale, but not before the Tleilaxu launch their most powerful weapon, a stone stove. Paul is deaf and plagued by the rock burner, forcing him to concentrate on his prescience. The Marty Supreme video’s cut Chalamet is most likely just starting to shoot those images.

Of course, someone who continues to read the Dune series is aware that Paul’s story doesn’t stop there. However, we won’t get into those plots until Chalamet posts another online video.

On December 18, 2026, Dune: Part Three will be in venues.

The first article on Den of Geek was Timothée Chalamet&#8217, s Bald Head Has Major Implications For Dune 3.

” Any feedback?” is perhaps one of the worst ways to ask for suggestions. It’s obscure and unfocused, and it doesn’t give a clear picture of what we’re looking for. Getting good opinions starts sooner than we might hope: it starts with the demand.

Starting the process of receiving feedback with a question may seem counterintuitive, but it makes sense if we consider that receiving feedback can be seen as a form of pattern research. In the same way that we wouldn’t perform any studies without the correct questions to get the insight that we need, the best way to ask for feedback is also to build strong issues.

Design analysis is not a one-time procedure. Sure, any great comments process continues until the project is finished, but this is especially true for layout because architecture work continues iteration after iteration, from a high level to the finest details. Each stage requires its unique set of questions.

And suddenly, as with any great research, we need to review what we got up, get to the base of its perspectives, and take activity. Iteration, evaluation, and problem. This look at each of those.

The query

Being available to input is important, but we need to be specific about what we’re looking for. Any comments,” What do you think,” or” I’d love to hear your mind” at the conclusion of a presentation are likely to garner a lot of different ideas, or worse, to make everyone follow the lead of the first speaker. And next… we get frustrated because vague issues like those you turn a high-level moves review into folks rather commenting on the borders of buttons. Which topic may be significant, so it might be difficult to get the team to choose the one you wanted to concentrate on.

But how do we get into this scenario? A number of elements are involved. One is that we don’t often consider asking as a part of the input approach. Another is how healthy it is to leave the question open and assume that everyone else will agree. Another is that in nonprofessional conversations, there’s usually no need to be that exact. In summary, we tend to undervalue the value of the issues, and we don’t make any improvements to them.

The work of asking good questions guidelines and focuses the criticism. It’s even a form of acceptance because it specifies what kind of comments you’d like to receive and how you’re open to them. It puts people in the right emotional position, especially in situations when they weren’t expecting to provide feedback.

There isn’t a second best way to ask for opinions. It simply needs to be certain, and sensitivity can take several shapes. The one of stage than level is a design for design criticism that I’ve found to be particularly helpful in my coaching.

” Stage” refers to each of the steps of the process—in our event, the design process. The kind of feedback changes as the consumer research moves forward to the final design. But within a single stage, one might also examine whether some assumptions are correct and whether there’s been a suitable language of the amassed opinions into updated designs as the task has evolved. The layers of user experience could serve as a starting point for potential questions. What do you want to know: Project objectives? user requirements? Functionality? the content Interaction design? Information architecture UI design? Navigation planning? Visual design? Branding?

Here’re a few example questions that are precise and to the point that refer to different layers:

• Functionality: Is it desirable to automate account creation?
• Interaction design: Take a look through the updated flow and let me know whether you see any steps or error states that I might’ve missed.
• Information architecture: This page contains two competing pieces of information. Is the structure effective in communicating them both?
• User interface design: What do you think about the top-most error counter, which ensures that you can see the next error even when the error is outside the viewport?
• Navigation design: From research, we identified these second-level navigation items, but once you’re on the page, the list feels too long and hard to navigate. Do you have any suggestions for how to handle this?
• Visual design: Are the sticky notifications in the bottom-right corner visible enough?

The other axis of specificity is determined by how far you’d like to go with the information being presented. For example, we might have introduced a new end-to-end flow, but there was a specific view that you found particularly challenging and you’d like a detailed review of that. This can be especially helpful from one iteration to the next when it’s crucial to highlight the areas that have changed.

There are other things that we can consider when we want to achieve more specific—and more effective—questions.

Eliminating generic qualifiers from your questions like “good,” “well,” “nice,” “bad,” “okay,” and” cool” is a simple trick. For example, asking,” When the block opens and the buttons appear, is this interaction good”? is possible to appear specific, but the “good” qualifier can be found in an even better question,” When the block opens and the buttons appear, is it clear what the next action is?”

Sometimes we actually do want broad feedback. That’s uncommon, but it can occur. In that sense, you might still make it explicit that you’re looking for a wide range of opinions, whether at a high level or with details. Or perhaps you should just say,” At first glance, what do you think”? so that it’s clear that what you’re asking is open ended but focused on someone’s impression after their first five seconds of looking at it.

Sometimes the project is particularly broad, and some areas may have already been thoroughly explored. In these situations, it might be useful to explicitly say that some parts are already locked in and aren’t open to feedback. Although it’s not something I’d recommend in general, I’ve found it helpful in avoiding falling into rabbit holes like those that could lead to further refinement but aren’t what’s important right now.

Asking specific questions can completely change the quality of the feedback that you receive. Even experienced designers will appreciate the clarity and efficiency gained from concentrating solely on what is required, and those with less refined critique skills will now be able to offer more actionable feedback. It can save a lot of time and frustration.

The iteration

Design iterations are probably the most visible part of the design work, and they provide a natural checkpoint for feedback. Many design tools have inline commenting, but many of those methods typically display changes as a single fluid stream in the same file. These methods cause conversations to vanish once they’re resolved, update shared UI components automatically, and require designs to always display the most recent version unless these would-be useful features were manually turned off. The implied goal that these design tools seem to have is to arrive at just one final copy with all discussions closed, probably because they inherited patterns from how written documents are collaboratively edited. That’s probably not the most effective way to go about designing critiques, but even if I don’t want to be too prescriptive, it might work for some teams.

The asynchronous design-critique approach that I find most effective is to create explicit checkpoints for discussion. For this, I’m going to use the term iteration post. It refers to a write-up or presentation of the design iteration followed by a discussion thread of some kind. This can be used on any platform that can accommodate this structure. By the way, when I refer to a “write-up or presentation“, I’m including video recordings or other media too: as long as it’s asynchronous, it works.

Using iteration posts has a number of benefits:

• It creates a rhythm in the design work so that the designer can review feedback from each iteration and prepare for the next.
• Decisions are made immediately available for future review, and conversations are also always available.
• It creates a record of how the design changed over time.
• It might also make it simpler to collect and act on feedback depending on the tool.

These posts of course don’t mean that no other feedback approach should be used, just that iteration posts could be the primary rhythm for a remote design team to use. And from there, there can develop additional feedback techniques ( such as live critique, pair designing, or inline comments ).

I don’t think there’s a standard format for iteration posts. However, there are a few high-level components that make sense as a baseline:

1. The goal
2. The layout
3. The list of changes
4. The querys

Each project is likely to have a goal, and hopefully it’s something that’s already been summarized in a single sentence somewhere else, such as the client brief, the product manager’s outline, or the project owner’s request. In every iteration post, I would copy and paste this, so I could do it again. The idea is to provide context and to repeat what’s essential to make each iteration post complete so that there’s no need to find information spread across multiple posts. The most recent iteration post will have everything I need if I want to know about the most recent design.

This copy-and-paste part introduces another relevant concept: alignment comes from repetition. Therefore, repeating information in posts helps to ensure that everyone is on the same page.

The design is then the actual series of information-architecture outlines, diagrams, flows, maps, wireframes, screens, visuals, and any other kind of design work that’s been done. It’s any design object, to put it briefly. For the final stages of work, I prefer the term blueprint to emphasize that I’ll be showing full flows instead of individual screens to make it easier to understand the bigger picture.

Because it makes it easier to refer to the objects, it might also be helpful to have clear names on them. Write the post in a way that helps people understand the work. It’s not much different from creating a strong live presentation.

For an efficient discussion, you should also include a bullet list of the changes from the previous iteration to let people focus on what’s new, which can be especially useful for larger pieces of work where keeping track, iteration after iteration, could become a challenge.

Finally, as mentioned earlier, it’s crucial that you include a list of the questions to help you guide the design critique in the desired direction. Doing this as a numbered list can also help make it easier to refer to each question by its number.

Not every iteration is the same. Earlier iterations don’t need to be as tightly focused—they can be more exploratory and experimental, maybe even breaking some of the design-language guidelines to see what’s possible. Then, later, the iterations begin coming to a decision and improving it until the feature development is complete.

I want to highlight that even if these iteration posts are written and conceived as checkpoints, by no means do they need to be exhaustive. A post might be just a concept to start a conversation, or it might be a cumulative list of all the features that have been added gradually over the course of each iteration until the full picture is achieved.

Over time, I also started using specific labels for incremental iterations: i1, i2, i3, and so on. Although this may seem like a minor labeling tip, it can be useful in many ways:

• Unique—It’s a clear unique marker. One can quickly say,” This was discussed in i4″ with each project, and everyone knows where to go to review things.
• Unassuming—It works like versions ( such as v1, v2, and v3 ) but in contrast, versions create the impression of something that’s big, exhaustive, and complete. Attempts must be exploratory, incomplete, or partial.
• Future proof—It resolves the “final” naming problem that you can run into with versions. No more files with the title “final final complete no-really-its-done” Within each project, the largest number always represents the latest iteration.

The wording release candidate (RC ) could be used to indicate when a design is finished enough to be worked on, even if there are some areas that still need improvement and, in turn, require more iterations, such as” with i8 we reached RC” or “i12 is an RC” to indicate when it is finished.

The review

A back-and-forth between two people that can be very productive typically occurs during a design critique. This approach is particularly effective during live, synchronous feedback. However, using a different approach when we work asynchronously is more effective: adopting a user-research mindset. Written feedback from teammates, stakeholders, or others can be treated as if it were the result of user interviews and surveys, and we can analyze it accordingly.

This shift has some significant advantages, making asynchronous feedback particularly effective, especially around these friction points:

1. It removes the pressure to reply to everyone.
2. It lessens the annoyance of snoop-by comments.
3. It lessens our personal stake.

The first friction point is having to press yourself to respond to each and every comment. Sometimes we write the iteration post, and we get replies from our team. It’s simple, straightforward, and doesn’t cause any issues. But other times, some solutions might require more in-depth discussions, and the amount of replies can quickly increase, which can create a tension between trying to be a good team player by replying to everyone and doing the next design iteration. This might be especially true if the respondent is a stakeholder or someone directly involved in the project who we feel we need to speak with. We need to accept that this pressure is absolutely normal, and it’s human nature to try to accommodate people who we care about. Responding to all comments at times can be effective, but when we consider a design critique more like user research, we realize that we don’t need to respond to every comment, and there are alternatives in asynchronous spaces:

One is to let the next iteration speak for itself. When the design changes and we publish a follow-up iteration, that’s the response. You might tag all the people who were involved in the previous discussion, but even that’s a choice, not a requirement.
• Another option is to respond politely to acknowledge each comment, such as” Understood. Thank you”,” Good points— I’ll review”, or” Thanks. In the upcoming iteration, I’ll include these. In some cases, this could also be just a single top-level comment along the lines of” Thanks for all the feedback everyone—the next iteration is coming soon”!
• Another option is to quickly summarize the comments before moving on. Depending on your workflow, this can be particularly useful as it can provide a simplified checklist that you can then use for the next iteration.

The swoop-by comment, which is the kind of feedback that comes from a member of a team or non-project who might not be aware of the context, restrictions, decisions, or requirements, or of the discussions from earlier iterations, is the second friction point. On their side, there’s something that one can hope that they might learn: they could start to acknowledge that they’re doing this and they could be more conscious in outlining where they’re coming from. Swoop-by comments frequently prompt the simple thought,” We’ve already discussed this,” and it can be frustrating to have to keep saying the same thing over and over.

Let’s begin by acknowledging again that there’s no need to reply to every comment. However, a brief response with a link to the previous discussion for additional information is typically sufficient if responding to a previously litigated point might be helpful. Remember, alignment comes from repetition, so it’s okay to repeat things sometimes!

Swoop-by commenting can still be useful for two reasons: first, they might point out something that isn’t clear, and second, they might have the power to fit in with a user’s perspective when they are seeing the design for the first time. Sure, you’ll still be frustrated, but that might at least help in dealing with it.

The personal stake we might have in relation to the design could be the third friction point, which might cause us to feel defensive if the review turned out to be more of a discussion. Treating feedback as user research helps us create a healthy distance between the people giving us feedback and our ego ( because yes, even if we don’t want to admit it, it’s there ). In the end, putting everything in aggregate form helps us to prioritize our work more.

Always remember that while you need to listen to stakeholders, project owners, and specific advice, you don’t have to accept every piece of feedback. You must examine it and come up with a conclusion that you can support, but sometimes “no” is the best choice.

As the designer leading the project, you’re in charge of that decision. In the end, everyone has their area of specialization, and the designer has the most background and knowledge to make the best choice. And by listening to the feedback that you’ve received, you’re making sure that it’s also the best and most balanced decision.

Thanks to Mike Shelton and Brie Anne Demkiw for their contributions to the initial draft of this article.

We’ve been conversing for a long time. Whether to present information, perform transactions, or just to check in on one another, people have yammered aside, chattering and gesticulating, through spoken discussion for many generations. Only recently have we begun to write our conversations, and only recently have we outsourced them to the system, a system that exhibits a far greater affection for written communications than for the vernacular rigors of spoken speech.

Laptops have trouble because between spoken and written speech, talk is more primitive. Machines must wrestle with the complexity of human statement, including the pauses and pauses, the gestures and brain speech, and the word selection and spoken dialect variations that can impede even the most skillfully crafted human-computer interaction. In the human-to-human situation, spoken language also has the opportunity of face-to-face call, where we can easily interpret visual interpersonal cues.

In contrast, written language develops its own fossil record of dated terms and phrases as we report it and keep utilization long after they are no longer needed in spoken communication ( for example, the welcome” To whom it may concern” ). Because it tends to be more consistent, smooth, and proper, written word is necessarily far easier for devices to interpret and know.

Spoken speech is not a pleasure in this regard. Besides the visual cues that mark conversations with emphasis and personal context, there are also linguistic cues and outspoken behaviors that mimic conversation in complex ways: how something is said, never what. Our spoken language conveys much more than the published word can actually contain, whether it’s rapid-fire, low-pitched, high-decibel, sarcastic, awkward, or groaning. But when it comes to tone interfaces—the devices we conduct spoken discussions with—we experience exciting difficulties as designers and content strategists.

Voice Compositions

We interact with voice interfaces for a variety of reasons, but according to Michael McTear, Zoraida Callejas, and David Griol in The Conversational Interface, those motivations by and large mirror the reasons we initiate conversations with other people, too ( ). We typically strike up a discussion in the following ways:

• we need something done ( such as a transaction ),
• we seek knowledge of anything ( some kind of data ), or
• we are social people and want someone to talk to ( conversation for conversation’s pleasure ).

A second talk from beginning to end that achieves some goal for the consumer, starting with the voice interface’s initial greeting and ending with the user exiting the interface, also fits into these three categories, which I refer to as interpersonal, technical, and prosocial. Note here that a conversation in our human sense—a chat between people that leads to some result and lasts an arbitrary length of time—could encompass multiple transactional, informational, and prosocial voice interactions in succession. In other words, a voice interaction is a conversation, but it may not always be one voice interaction.

Purely prosocial conversations are more gimmicky than captivating in most voice interfaces, because machines don’t yet have the capacity to really want to know how we’re doing and to do the sort of glad-handing humans crave. Additionally, there is ongoing debate about whether users actually prefer the type of organic human conversation that starts with a prosocial voice and progresses seamlessly into new ones. In fact, in Voice User Interface Design, Michael Cohen, James Giangola, and Jennifer Balogh recommend sticking to users ‘ expectations by mimicking how they interact with other voice interfaces rather than trying too hard to be human—potentially alienating them in the process ( ).

That leaves two different types of conversations we can have with one another that a voice interface can also have easily, including one that is transactional and one that is informational, teaching us something new ( “discuss a musical” ).

Transactional voice interactions

When you order a Hawaiian pizza with extra pineapple, you’re typically having a conversation and a voice interaction when you’re tapping buttons on a food delivery app. Even when we walk up to the counter and place an order, the conversation quickly pivots from an initial smattering of neighborly small talk to the real mission at hand: ordering a pizza ( generously topped with pineapple, as it should be ).

Alison: Hey, how are things going?

Burhan: Hi, welcome to Crust Deluxe! It’s chilly outside. How can I help you?

Alison: Can I get a pizza from Hawaii with extra pineapple.

Burhan: Sure, what size?

Large, Alison.

Burhan: Anything else?

Alison: No thanks, that’s it.

Burhan: Something to drink?

Alison, I’ll have a bottle of Coke.

Burhan: You got it. That will cost$ 13.55 and take about fifteen minutes.

Each progressive disclosure in this transactional conversation reveals more and more of the desired outcome of the transaction: a service rendered or a product delivered. Conversations that are transactional have certain characteristics: they are direct, precise, and cost-effective. They quickly dispense with pleasantries.

Informational voice interactions

Meanwhile, some conversations are primarily about obtaining information. Alison might visit Crust Deluxe with the sole intention of placing an order, but she might not want to leave with a pizza at all. She might be just as interested in whether they serve halal or kosher dishes, gluten-free options, or something else. Even though we have a prosocial mini-conversation once more at the beginning to establish politeness, we’re after much more.

Alison: Hey, how are things going?

Burhan: Hi, welcome to Crust Deluxe! It’s chilly outside. How can I help you?

Alison: Can I ask a few questions?

Burhan: Of course! Go right ahead.

Alison, do you have any menu items that are halal?

Burhan: Absolutely! On request, we can make any pie halal. We also have lots of vegetarian, ovo-lacto, and vegan options. Do you have any other dietary restrictions in mind?

Alison: What about gluten-free pizzas?

Burhan: For both our deep-dish and thin-crust pizzas, we can definitely make a gluten-free crust for you, without a problem. Anything else I can answer for you?

Alison: That’s it for now. Good to know. Thank you!

Burhan: Anytime, come back soon!

This dialogue is entirely different. Here, the goal is to get a certain set of facts. Informational conversations are research expeditions to gather data, news, or facts, or they are investigative quests for the truth. Voice interactions that are informational might be more long-winded than transactional conversations by necessity. In order for the customer to understand the key takeaways, responses are typically longer, more in-depth, and carefully communicated.

Voice Interfaces

Voice interfaces, in essence, use speech to assist users in accomplishing their objectives. But simply because an interface has a voice component doesn’t mean that every user interaction with it is mediated through voice. We’re most concerned with pure voice interfaces, which are completely dependent on spoken conversation and lack any visual component, making them much more nuanced and challenging to deal with because multimodal voice interfaces can lean on visual components like screens as crutches.

Though voice interfaces have long been integral to the imagined future of humanity in science fiction, only recently have those lofty visions become fully realized in genuine voice interfaces.

IVR ( interactive voice response ) systems

Though written conversational interfaces have been fixtures of computing for many decades, voice interfaces first emerged in the early 1990s with text-to-speech ( TTS ) dictation programs that recited written text aloud, as well as speech-enabled in-car systems that gave directions to a user-provided address. We became familiar with the first real voice interfaces that could actually be spoken to without having to deal with overburdened customer service representatives as a result of the development of interactive voice response ( IVR ) systems.

IVR systems allowed organizations to reduce their reliance on call centers but soon became notorious for their clunkiness. Similar to the corporate world, these systems were primarily created as metaphorical switchboards to direct customers to a real phone agent (” Say Reservations to book a flight or check an itinerary” ), and chances are you’ll have a conversation with one when you call an airline or hotel conglomerate. Despite their functional issues and users ‘ frustration with their inability to speak to an actual human right away, IVR systems proliferated in the early 1990s across a variety of industries (, PDF).

IVR systems have a reputation for having less scintillating conversations than we’re used to in real life ( or even in science fiction ), despite being extremely repetitive and monotonous.

Screen readers

The invention of the screen reader, a tool that converts visual content into synthesized speech, was a development of IVR systems in parallel. For Blind or visually impaired website users, it’s the predominant method of interacting with text, multimedia, or form elements. Perhaps the closest thing we have today to an out-of-the-box delivery of content via voice is represented by screen readers.

Among the first screen readers known by that moniker was the Screen Reader for the BBC Micro and NEEC Portable developed by the Research Centre for the Education of the Visually Handicapped (RCEVH) at the University of Birmingham in 1986 ( ). The first IBM Screen Reader for text-based computers was created by Jim Thatcher in the same year, which was later recreated for a computer with graphical user interfaces ( GUIs ) ( ).

With the rapid growth of the web in the 1990s, the demand for accessible tools for websites exploded. Screen readers started facilitating quick interactions with web pages that ostensibly allow disabled users to traverse the page as an aural and temporal space rather than a visual and physical one with the introduction of semantic HTML and especially ARIA roles in 2008, enabling speedy interactions with the pages. In other words, screen readers for the web “provide mechanisms that translate visual design constructs—proximity, proportion, etc. in A List Apart, writes Aaron Gustafson, “into useful information.” ” At least they do when documents are authored thoughtfully” ( ).

There is a big draw for screen readers: they’re challenging to use and relentlessly verbose, despite being incredibly instructive for voice interface designers. The visual structures of websites and web navigation don’t translate well to screen readers, sometimes resulting in unwieldy pronouncements that name every manipulable HTML element and announce every formatting change. Working with web-based interfaces takes a cognitive toll for many screen reader users.

In Wired, accessibility advocate and voice engineer Chris Maury considers why the screen reader experience is ill-suited to users relying on voice:

I hated the way Screen Readers operated from the beginning. Why are they designed the way they are? It makes no sense to present information visually before converting it to audio only after that. All of the time and energy that goes into creating the perfect user experience for an app is wasted, or even worse, adversely impacting the experience for blind users. ( )

In many cases, well-designed voice interfaces can speed users to their destination better than long-winded screen reader monologues. After all, users of the visual interface have the advantage of freely scurrying around the viewport to find information without worrying about it. Blind users, meanwhile, are obligated to listen to every utterance synthesized into speech and therefore prize brevity and efficiency. Users with disabilities who have long had no choice but to use clumsy screen readers might find that voice interfaces, especially more contemporary voice assistants, provide a more streamlined experience.

Voice assistants

Many of us immediately associate voice assistants with the subset of voice interfaces that are now commonplace in living rooms, smart homes, and offices with the film HAL from 2001: A Space Odyssey or Majel Barrett’s voice as the omniscient computer in Star Trek. Voice assistants are akin to personal concierges that can answer questions, schedule appointments, conduct searches, and perform other common day-to-day tasks. And they’re quickly gaining more attention from accessibility advocates for their assistive potential.

Before the earliest IVR systems found success in the enterprise, Apple published a demonstration video in 1987 depicting the Knowledge Navigator, a voice assistant that could transcribe spoken words and recognize human speech to a great degree of accuracy. Then, in 2001, Tim Berners-Lee and others created their vision for a” semantic web agent” that would carry out routine tasks like” checking calendars, making appointments, and finding locations” ( hinter paywall ). It wasn’t until 2011 that Apple’s Siri finally entered the picture, making voice assistants a tangible reality for consumers.

There are a lot of variations in the programmability and customization of some voice assistants compared to others ( Fig. 1 ). As a result of the breadth of voice assistants available today ( Fig. 1 ). At one extreme, everything except vendor-provided features is locked down, for example, at the time of their release, the core functionality of Apple’s Siri and Microsoft’s Cortana couldn’t be extended beyond their existing capabilities. There are no other means by which developers can interact with Siri at a low level, aside from predefined categories of tasks like sending messages, hailing rideshares, making restaurant reservations, and other things, so even now it isn’t possible to program Siri to perform arbitrary functions.

At the opposite end of the spectrum, voice assistants like Amazon Alexa and Google Home offer a core foundation on which developers can build custom voice interfaces. For this reason, developers who feel constrained by the limitations of Siri and Cortana are increasingly using programmable voice assistants that are extensibable and customizable. Amazon offers the Alexa Skills Kit, a developer framework for building custom voice interfaces for Amazon Alexa, while Google Home offers the ability to program arbitrary Google Assistant skills. Users today have the option to choose from among the thousands of custom-built skills available in the Google Assistant and Amazon Alexa ecosystems.

As businesses like Amazon, Apple, Microsoft, and Google continue to dominate their markets, they are also selling and open-sourcing an unmatched range of tools and frameworks for designers and developers, aiming to make creating voice interfaces as simple as possible, even without the use of any code.

Often by necessity, voice assistants like Amazon Alexa tend to be monochannel—they’re tightly coupled to a device and can’t be accessed on a computer or smartphone instead. In contrast, many development platforms, such as Google’s Dialogflow, have omnichannel capabilities that allow users to create a single conversational interface that then manifests as a voice interface, textual chatbot, and IVR system upon deployment. I don’t prescribe any specific implementation approaches in this design-focused book, but in Chapter 4 we’ll get into some of the implications these variables might have on the way you build out your design artifacts.

Voice content

Simply put, voice content is content delivered through voice. Voice content must be free-flowing, organic, contextless, and concise in order to preserve what makes human conversation so compelling in the first place.

Our world is replete with voice content in various forms: screen readers reciting website content, voice assistants rattling off a weather forecast, and automated phone hotline responses governed by IVR systems. We’re most concerned with the content in this book being delivered auditorically, not as an option but as a necessity.

For many of us, our first foray into informational voice interfaces will be to deliver content to users. There is only one issue: any content we already have isn’t in any way suitable for this new environment. So how do we make the content trapped on our websites more conversational? And how do we create fresh copy that works with voice-recognition?

Lately, we’ve begun slicing and dicing our content in unprecedented ways. Websites are, in many ways, massive vaults of what I call macrocontent: lengthy prose that can last for miles in a browser window while being viewed in microfilm format in newspaper archives. Back in 2002, well before the present-day ubiquity of voice assistants, technologist Anil Dash defined microcontent as permalinked pieces of content that stay legible regardless of environment, such as email or text messages:

An example of microcontent can be a day’s weather forecast [sic], an airplane flight’s arrival and departure times, an abstract from a lengthy publication, or a single instant message. ( )

I would update Dash’s definition of microcontent to include all instances of bite-sized content that goes beyond written communiqués. After all, today we encounter microcontent in interfaces where a small snippet of copy is displayed alone, unmoored from the browser, like a textbot confirmation of a restaurant reservation. Informing delivery channels both established and novel, Microcontent provides the best opportunity to find out how your content can be stretched to the limits of its potential.

As microcontent, voice content is unique because it’s an example of how content is experienced in time rather than in space. We can instantly see when the next train is coming from a digital sign underground, but voice interfaces keep our attention occupied for so long that screen reader users are all too familiar.

Because microcontent is fundamentally made up of isolated blobs with no relation to the channels where they’ll eventually end up, we need to ensure that our microcontent truly performs well as voice content—and that means focusing on the two most important traits of robust voice content: voice content legibility and voice content discoverability.

Our voice content’s legibility and discoverability in general both depend on how it manifests in terms of perceived space and time.

Although I’m not sure when I first heard this statement, it has stuck with me over the centuries. How do you generate solutions for scenarios you can’t think? Or create materials that are functional on products that have not yet been created?

Flash, Photoshop, and flexible pattern

When I first started designing sites, my go-to technology was Photoshop. I set about making a layout that I would eventually decline content into a 960px cloth. The growth phase was about attaining pixel-perfect precision using set widths, fixed levels, and absolute placement.

All of this was altered by Ethan Marcotte’s speak at An Event Apart and the subsequent article in A Checklist Off in 2010. I was sold on responsive pattern as soon as I heard about it, but I was even terrified. The pixel-perfect models full of special figures that I had formerly prided myself on producing were no longer good enough.

My first encounter with flexible style didn’t help my fear. My second project was to get an active fixed-width website and make it reactive. You can’t really put responsiveness at the end of a job, which I learned the hard way. To make smooth design, you need to prepare throughout the style phase.

A new way to style

Making flexible or smooth websites has always been about removing restrictions and creating content that can be viewed on any system. It relies on the use of percentage-based design, which I immediately achieved with local CSS and power groups:

.column-span-6 { width: 49%; float: left; margin-right: 0.5%; margin-left: 0.5%;}.column-span-4 { width: 32%; float: left; margin-right: 0.5%; margin-left: 0.5%;}.column-span-3 { width: 24%; float: left; margin-right: 0.5%; margin-left: 0.5%;}

Therefore with Sass but that I could use @includes to re-use repeated blocks of code and transition to more semantic premium:

.logo { @include colSpan(6);}.search { @include colSpan(3);}.social-share { @include colSpan(3);}

Media questions

The next ingredient for flexible design is press queries. Without them, content would shrink to fit the available space, regardless of whether it remained readable ( The exact opposite issue resulted from the development of a mobile-first approach ).

Media questions prevented this by allowing us to add breakpoints where the design could adapt. Like most people, I started out with three breakpoints: one for desktop, one for tablets, and one for mobile. Over the years, I added more and more for phablets, wide screens, and so on. 

For years, I happily worked this way and improved both my design and front-end skills in the process. The only problem I encountered was making changes to content, since with our Sass grid system in place, there was no way for the site owners to add content without amending the markup—something a small business owner might struggle with. This is because each row in the grid was defined using a div as a container. Adding content meant creating new row markup, which requires a level of HTML knowledge.

String premium was a mainstay of early flexible design, present in all the frequently used systems like Bootstrap and Skeleton.

 
1 of 7
 
2 of 7
 
3 of 7
 
4 of 7
 
5 of 7
 
6 of 7
 
7 of 7

Another difficulty arose as I moved from a design firm building websites for smaller- to medium-sized companies, to larger in-house teams where I worked across a collection of related sites. In those capacities, I began to work many more with washable parts.

Our rely on multimedia queries resulted in parts that were tied to frequent window sizes. If the goal of part libraries is modify, then this is a real problem because you can just use these components if the devices you’re designing for correspond to the viewport sizes used in the pattern library—in the process never really hitting that “devices that don’t already occur” goal.

Then there’s the problem of space. Media questions allow components to adapt based on the viewport size, but what if I put a component into a sidebar, like in the figure below?

Container queries: our savior or a false dawn?

Container queries have long been touted as an improvement upon media queries, but at the time of writing are unsupported in most browsers. There are workarounds for JavaScript, but they can lead to dependencies and compatibility issues. The basic theory underlying container queries is that elements should change based on the size of their parent container and not the viewport width, as seen in the following illustrations.

One of the biggest arguments in favor of container queries is that they help us create components or design patterns that are truly reusable because they can be picked up and placed anywhere in a layout. This is an important step in moving toward a form of component-based design that works at any size on any device.

In other words, responsive elements are meant to replace responsive layouts.

Container queries will help us move from designing pages that respond to the browser or device size to designing components that can be placed in a sidebar or in the main content, and respond accordingly.

My issue is that layout is still used to determine when a design needs to adapt. This approach will always be restrictive, as we will still need pre-defined breakpoints. For this reason, my main question with container queries is, How would we decide when to change the CSS used by a component?

A component library that is disconnected from context and real content is probably not the best place to make that choice.

As the diagrams below illustrate, we can use container queries to create designs for specific container widths, but what if I want to change the design based on the image size or ratio?

In this example, the dimensions of the container are not what should dictate the design, rather, the image is.

Without reliable cross-browser support for them, it’s difficult to say for certain whether container queries will be successful. Responsive component libraries would definitely evolve how we design and would improve the possibilities for reuse and design at scale. However, we might always need to modify these elements to fit our content.

CSS is changing

Whilst the container query debate rumbles on, there have been numerous advances in CSS that change the way we think about design. The days of fixed-width elements measured in pixels and floated div elements used to cobble layouts together are long gone, consigned to history along with table layouts. Flexbox and CSS Grid have revolutionized layouts for the web. We can now create elements that wrap onto new rows when they run out of space, not when the device changes.

.wrapper { display: grid; grid-template-columns: repeat(auto-fit, 450px); gap: 10px;}

The repeat() function paired with auto-fit or auto-fill allows us to specify how much space each column should use while leaving it up to the browser to decide when to spill the columns onto a new line. Similar things can be achieved with Flexbox, as elements can wrap over multiple rows and “flex” to fill available space. 

.wrapper { display: flex; flex-wrap: wrap; justify-content: space-between;}.child { flex-basis: 32%; margin-bottom: 20px;}

You don’t need to wrap elements in container rows, which is the biggest benefit of all of this. Without rows, content isn’t tied to page markup in quite the same way, allowing for removals or additions of content without additional development.

This is a big step forward when it comes to creating designs that allow for evolving content, but the real game changer for flexible designs is CSS Subgrid.

Remember the days of crafting perfectly aligned interfaces, only for the customer to add an unbelievably long header almost as soon as they’re given CMS access, like the illustration below?

Subgrid allows elements to respond to adjustments in their own content and in the content of sibling elements, helping us create designs more resilient to change.

.wrapper { display: grid; grid-template-columns: repeat(auto-fit, minmax(150px, 1fr)); grid-template-rows: auto 1fr auto; gap: 10px;}.sub-grid { display: grid; grid-row: span 3; grid-template-rows: subgrid; /* sets rows to parent grid */}

CSS Grid allows us to separate layout and content, thereby enabling flexible designs. Meanwhile, Subgrid allows us to create designs that can adapt in order to suit morphing content. The above code can be implemented behind an @supports feature query even though Firefox is the only browser that supports subgrid at the time of writing.

Intrinsic layouts

I’d be remiss not to mention intrinsic layouts, a term used by Jen Simmons to describe a mix of contemporary and traditional CSS features used to create layouts that respond to available space.

Responsive layouts have flexible columns using percentages. Intrinsic layouts, on the other hand, use the fr unit to create flexible columns that won’t ever shrink so much that they render the content illegible.

frunits is a statement that says,” I want you to distribute the extra space in this way, but… don’t ever make it smaller than the content that is inside of it.”

—Jen Simmons,” Designing Intrinsic Layouts”

Intrinsic layouts can also make use of a mix of fixed and flexible units, letting the content choose how much space it occupies.

What makes intrinsic design stand out is that it not only creates designs that can withstand future devices but also helps scale design without losing flexibility. Without having to have the same breakpoints or content as in the previous implementation, components and patterns can be removed and reused.

We can now create designs that adapt to the space they have, the content within them, and the content around them. We can create responsive components using an intrinsic approach without relying on container queries.

Another 2010 moment?

This intrinsic approach should in my view be every bit as groundbreaking as responsive web design was ten years ago. It’s another “everything changed” moment for me.

But it doesn’t seem to be moving quite as fast, I haven’t yet had that same career-changing moment I had with responsive design, despite the widely shared and brilliant talk that brought it to my attention.

One possible explanation for that might be that I now work for a sizable company, which is significantly different from the role I held as a design agency in 2010: In my agency days, every new project was a clean slate, a chance to try something new. Nowadays, projects use existing tools and frameworks and are often improvements to existing websites with an existing codebase.

Another possibility is that I’m now more prepared for change. In 2010 I was new to design in general, the shift was frightening and required a lot of learning. Additionally, an intrinsic approach isn’t exactly new; it’s about applying existing skills and CSS knowledge in a unique way.

You can’t framework your way out of a content problem

Another reason for the slightly slower adoption of intrinsic design could be the lack of quick-fix framework solutions available to kick-start the change.

Ten years ago, responsive grid systems were everywhere. With a framework like Bootstrap or Skeleton, you had a responsive design template at your fingertips.

Because the benefit of having a selection of units is a hindrance when it comes to creating layout templates, intrinsic design and frameworks do not go hand in hand quite as well. The beauty of intrinsic design is combining different units and experimenting with techniques to get the best for your content.

And then there are design tools. We probably all used Photoshop templates for desktop, tablet, and mobile devices to drop designs into and demonstrate how the site would look at all three stages at some point in our careers.

How do you do that now, with each component responding to content and layouts flexing as and when they need to? Personally, I’m a big fan of this kind of design in the browser.

The debate about “whether designers should code” is another that has rumbled on for years. When designing a digital product, we should, at the very least, design for a best- and worst-case scenario when it comes to content. It’s not ideal to implement this in a graphics-based software package. In code, we can add longer sentences, more radio buttons, and extra tabs, and watch in real time as the design adapts. Does it continue to function? Is the design too reliant on the current content?

Personally, I look forward to the day intrinsic design is the standard for design, when a design component can be truly flexible and adapt to both its space and content with no reliance on device or container dimensions.

First, the content

Content is not constant. After all, to design for the unanticipated or unexpected, we must take into account changes in content, like in our earlier Subgrid card illustration, which allowed the cards to modify both their own content and that of their sibling components.

Thankfully, there’s more to CSS than layout, and plenty of properties and values can help us put content first. Subgrid and pseudo-elements like ::first-line and ::first-letter help to separate design from markup so we can create designs that allow for changes.

Instead of the dated markup tricks below,

 First line of text with different styling...

—we can target content based on where it appears.

.element::first-line { font-size: 1.4em;}.element::first-letter { color: red;}

Much bigger additions to CSS include logical properties, which change the way we construct designs using logical dimensions (start and end) instead of physical ones (left and right), something CSS Grid also does with functions like min(), max(), and clamp().

This flexibility allows for directional changes according to content, a common requirement when we need to present content in multiple languages. In the past, this was often achieved with Sass mixins but was often limited to switching from left-to-right to right-to-left orientation.

Directional variables must be set in the Sass version.

$direction: rtl;$opposite-direction: ltr;$start-direction: right;$end-direction: left;

These variables can be used as values—

body { direction: $direction; text-align: $start-direction;}

—or as real estate.

margin-#{$end-direction}: 10px;padding-#{$start-direction}: 10px;

However, now we have native logical properties, removing the reliance on both Sass ( or a similar tool ) and pre-planning that necessitated using variables throughout a codebase. These properties also start to break apart the tight coupling between a design and strict physical dimensions, creating more flexibility for changes in language and in direction.

margin-block-end: 10px;padding-block-start: 10px;

There are also native start and end values for properties like text-align, which means we can replace text-align: right with text-align: start.

Like the earlier examples, these properties help to build out designs that aren’t constrained to one language, the design will reflect the content’s needs.

Fluid and fixed

We briefly covered the power of combining fixed widths with fluid widths with intrinsic layouts. The min() and max() functions are a similar concept, allowing you to specify a fixed value with a flexible alternative. 

For min() this means setting a fluid minimum value and a maximum fixed value.

.element { width: min(50%, 300px);}

The element in the figure above will be 50 % of its container as long as the element’s width doesn’t exceed 300px.

For max() we can set a flexible max value and a minimum fixed value.

.element { width: max(50%, 300px);}

Now the element will be 50 % of its container as long as the element’s width is at least 300px. This means we can set limits but allow content to react to the available space.

The clamp() function builds on this by allowing us to set a preferred value with a third parameter. Now we can allow the element to shrink or grow if it needs to without getting to a point where it becomes unusable.

.element { width: clamp(300px, 50%, 600px);}

This time, the element’s width will be 50 % of its container’s preferred value, with no exceptions for 300px and 600px.

With these techniques, we have a content-first approach to responsive design. We can separate content from markup, meaning the changes users make will not affect the design. By making plans for unanticipated changes in language or direction, we can begin to future-proof designs. And we can increase flexibility by setting desired dimensions alongside flexible alternatives, allowing for more or less content to be displayed correctly.

First, the circumstances

Thanks to what we’ve discussed so far, we can cover device flexibility by changing our approach, designing around content and space instead of catering to devices. But what about that last bit of Jeffrey Zeldman’s quote,”… situations you haven’t imagined”?

It’s a completely different design process for someone using a mobile phone and moving through a crowded street in glaring sunshine from a person using a desktop computer. Situations and environments are hard to plan for or predict because they change as people react to their own unique challenges and tasks.

Choice is so crucial because of this. One size never fits all, so we need to design for multiple scenarios to create equal experiences for all our users.

Thankfully, there is a lot we can do to provide choice.

Responsible design is important.

” There are parts of the world where mobile data is prohibitively expensive, and where there is little or no broadband infrastructure”.

” I Used the Web for a Day on a 50 MB Budget.”

Chris Ashton

One of the biggest assumptions we make is that people interacting with our designs have a good wifi connection and a wide screen monitor. However, our users may be commuters using smaller mobile devices that may experience disconnects in connectivity in the real world. There is nothing more frustrating than a web page that won’t load, but there are ways we can help users use less data or deal with sporadic connectivity.

The srcset attribute allows the browser to decide which image to serve. This means we can create smaller ‘cropped’ images to display on mobile devices in turn using less bandwidth and less data.

The preload attribute can also help us to think about how and when media is downloaded. It can be used to tell a browser about any critical assets that need to be downloaded with high priority, improving perceived performance and the user experience. 

There’s also native lazy loading, which indicates assets that should only be downloaded when they are needed.

With srcset, preload, and lazy loading, we can start to tailor a user’s experience based on the situation they find themselves in. What none of this does, however, is allow the user themselves to decide what they want downloaded, as the decision is usually the browser’s to make. 

So how can we put users in control?

The return of media inquiries

Media questions have always been about much more than device sizes. They allow content to adapt to different situations, with screen size being just one of them.

We’ve long been able to check for media types like print and speech and features such as hover, resolution, and color. These checks allow us to provide options that suit more than one scenario, it’s less about one-size-fits-all and more about serving adaptable content.

The Level 5 spec for Media Queries is still being developed as of this writing. It introduces some really exciting queries that in the future will help us design for multiple other unexpected situations.

For instance, a light-level option lets you alter a user’s style when they are in the dark or in the sun. Paired with custom properties, these features allow us to quickly create designs or themes for specific environments.

@media (light-level: normal) { --background-color: #fff; --text-color: #0b0c0c; }@media (light-level: dim) { --background-color: #efd226; --text-color: #0b0c0c;}

Another key feature of the Level 5 spec is personalization. Instead of creating designs that are the same for everyone, users can choose what works for them. This is achieved by using features like prefers-reduced-data, prefers-color-scheme, and prefers-reduced-motion, the latter two of which already enjoy broad browser support. These features tap into preferences set via the operating system or browser so people don’t have to spend time making each site they visit more usable. 

Media questions like this go beyond choices made by a browser to grant more control to the user.

Expect the unexpected

In the end, the one thing we should always anticipate is that things will change. Devices in particular change faster than we can keep up, with foldable screens already on the market.

We can design for content, but we can’t do it for this constantly changing landscape. By putting content first and allowing that content to adapt to whatever space surrounds it, we can create more robust, flexible designs that increase the longevity of our products.

A lot of the CSS discussed here is about moving away from layouts and putting content at the heart of design. There is so much more we can do to adopt a more intrinsic approach, from responsive components to fixed and fluid units. Even better, we can test these techniques during the design phase by designing in-browser and watching how our designs adapt in real-time.

When it comes to unexpected circumstances, we must make sure our goods are accessible whenever and wherever needed. We can move closer to achieving this by involving users in our design decisions, by creating choice via browsers, and by giving control to our users with user-preference-based media queries.

Good design for the unexpected should allow for change, provide choice, and give control to those we serve: our users themselves.

Many wealthy runners had come to the conclusion that it was impossible to run a mile in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

However, on May 6, 1956, Roger Bannister caught anyone by surprise. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world today knew that the four-minute hour was possible thanks to this change in the standard. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Finally, a year later, three runners all managed to cross the four-minute hurdle in the same culture. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We do a lot more when we think something is possible, and we only think it can be done when we see someone else doing it once more. As for individual running speed, we also think there are strict guidelines for how a website should do.

Establishing requirements for a green website

The key indicators of climate performance in most big companies are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. However, we aren’t held to any specific environmental standards in the world of websites and apps, and we only recently have access to the tools and strategies we need to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the amount of CO₂ that a website item produces. We can’t assess the pollutants coming out of the exhaust valves on our laptops. The pollution coming from power plants that burn coal and oil are considerably away, out of sight, and out of mind. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon emissions, then we need to get what we can estimate. The following are the main elements that could be used as measures of coal emissions:

1. Transfer of data
2. Electricity’s coal power

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a reliable indicator of how much energy is being consumed and how much carbon is being released. As a rule of thumb, the more data transferred, the more energy used in the data center, telecoms networks, and end user devices.

The most accurate way to calculate data transfer for a single visit for web pages is to measure the page weight, which is the first time a user visits the page in kilobytes. It’s fairly easy to measure using the developer tools in any modern web browser. Frequently, the statistics for the total data transfer of any web application are included in your web hosting account ( Fig. 2.1 ).

The nice thing about page weight as a metric is that it allows us to compare the efficiency of web pages on a level playing field without confusing the issue with constantly changing traffic volumes.

A large scope is required to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for roughly half of this data transfer, making them the single biggest contributor to carbon emissions on the typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While the majority of technologies, including the underlying technology of the web like data centers and transmission networks, become more and more energy efficient, websites themselves become less effective as time goes on.

You might be aware of the idea behind performance budgeting as a method for directing a project team to deliver faster user experiences. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than vague suggestions, much like speed limits while driving, so the goal should always be to come in within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use competitor page weight to compare the new website to the old one. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

We could start looking at the transferability of our web pages for repeat visitors if we want to take it one step further. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, visitors who load the same page more frequently are likely to have a high percentage of the files cached in their browser, which means they don’t need to move all the files on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. Moving beyond the first visit and measuring page weight budgets for scenarios beyond this level of detail can help us learn even more about how to optimize efficiency for users who regularly visit our pages.

Page weight budgets are easy to track throughout a design and development process. Although they don’t directly disclose their data on energy consumption and carbon emissions, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of lowering web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Electricity’s coal power

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” (gCO₂/k Wh ) is used to describe how much carbon dioxide is produced for each kilowatt-hour of electricity ). This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, which combine energy from a variety of sources with different carbon intensity levels. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will result in significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

However, we don’t want to move our servers too far away from our users because it requires a lot of energy to transmit data through the telecom’s networks, and the more energy is used, the further the data travels. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and measure the distance from that location to the data center used by our hosting company by using the distance itself as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how hosting it somewhere in North America, ideally on the West Coast, would significantly lessen the distance and the amount of energy required to transmit the data. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. A tool my team created accomplishes this by measuring the data transfer over the wire when a web page is loaded, calculating the associated electricity consumption, and then converting that data into a CO₂ figure ( Fig. ₂.4). It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to improve it and tailor the data more appropriately to your project’s unique features.

With the ability to calculate carbon emissions for our projects, we could even set up carbon budgets as well. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds a layer of abstraction that isn’t as intuitive, carbon budgets do focus our minds on the main thing we’re trying to reduce, and this is in line with the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational load is increasingly shifting from the data center to users ‘ devices, whether they are phones, tablets, laptops, desktops, or even smart TVs, as front-end web technologies advance. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React make it possible to create applications where the” thinking” process is performed partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more computation in a web browser requires more energy to be used by the user’s devices. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally exclude users with older, slower devices and make the batteries on phones and laptops drain more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. This not only harms the environment, but it places a disproportionate financial burden on the poorest members of society.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the developer console of the Safari browser is one of the tools we currently have ( Fig. 2.5 ).

You are aware of the moment your computer’s cooling fans start spinning so frantically that you mistakenly believe it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating and shows how much CPU is used and how long it takes to load the web page. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

Do you remember when having a great website was enough? Now, people are getting answers from Siri, Google search snippets, and mobile apps, not just our websites. Forward-thinking organizations have adopted an omnichannel content strategy, whose mission is to reach audiences across multiple digital channels and platforms.

But how do you set up a content management system (CMS) to reach your audience now and in the future? I learned the hard way that creating a content model—a definition of content types, attributes, and relationships that let people and systems understand content—with my more familiar design-system thinking would capsize my customer’s omnichannel content strategy. You can avoid that outcome by creating content models that are semantic and that also connect related content. 

I recently had the opportunity to lead the CMS implementation for a Fortune 500 company. The client was excited by the benefits of an omnichannel content strategy, including content reuse, multichannel marketing, and robot delivery—designing content to be intelligible to bots, Google knowledge panels, snippets, and voice user interfaces. 

A content model is a critical foundation for an omnichannel content strategy, and for our content to be understood by multiple systems, the model needed semantic types—types named according to their meaning instead of their presentation. Our goal was to let authors create content and reuse it wherever it was relevant. But as the project proceeded, I realized that supporting content reuse at the scale that my customer needed required the whole team to recognize a new pattern.

Despite our best intentions, we kept drawing from what we were more familiar with: design systems. Unlike web-focused content strategies, an omnichannel content strategy can’t rely on WYSIWYG tools for design and layout. Our tendency to approach the content model with our familiar design-system thinking constantly led us to veer away from one of the primary purposes of a content model: delivering content to audiences on multiple marketing channels.

Two essential principles for an effective content model

We needed to help our designers, developers, and stakeholders understand that we were doing something very different from their prior web projects, where it was natural for everyone to think about content as visual building blocks fitting into layouts. The previous approach was not only more familiar but also more intuitive—at least at first—because it made the designs feel more tangible. We discovered two principles that helped the team understand how a content model differs from the design systems that we were used to:

1. Content models must define semantics instead of layout.
2. And content models should connect content that belongs together.

Semantic content models

A semantic content model uses type and attribute names that reflect the meaning of the content, not how it will be displayed. For example, in a nonsemantic model, teams might create types like teasers, media blocks, and cards. Although these types might make it easy to lay out content, they don’t help delivery channels understand the content’s meaning, which in turn would have opened the door to the content being presented in each marketing channel. In contrast, a semantic content model uses type names like product, service, and testimonial so that each delivery channel can understand the content and use it as it sees fit. 

When you’re creating a semantic content model, a great place to start is to look over the types and properties defined by Schema.org, a community-driven resource for type definitions that are intelligible to platforms like Google search.

A semantic content model has several benefits:

• Even if your team doesn’t care about omnichannel content, a semantic content model decouples content from its presentation so that teams can evolve the website’s design without needing to refactor its content. In this way, content can withstand disruptive website redesigns. 
• A semantic content model also provides a competitive edge. By adding structured data based on Schema.org’s types and properties, a website can provide hints to help Google understand the content, display it in search snippets or knowledge panels, and use it to answer voice-interface user questions. Potential visitors could discover your content without ever setting foot in your website.
• Beyond those practical benefits, you’ll also need a semantic content model if you want to deliver omnichannel content. To use the same content in multiple marketing channels, delivery channels need to be able to understand it. For example, if your content model were to provide a list of questions and answers, it could easily be rendered on a frequently asked questions (FAQ) page, but it could also be used in a voice interface or by a bot that answers common questions.

For example, using a semantic content model for articles, events, people, and locations lets A List Apart provide cleanly structured data for search engines so that users can read the content on the website, in Google knowledge panels, and even with hypothetical voice interfaces in the future.

Content models that connect

After struggling to describe what makes a good content model, I’ve come to realize that the best models are those that are semantic and that also connect related content components (such as a FAQ item’s question and answer pair), instead of slicing up related content across disparate content components. A good content model connects content that should remain together so that multiple delivery channels can use it without needing to first put those pieces back together.

Think about writing an article or essay. An article’s meaning and usefulness depends upon its parts being kept together. Would one of the headings or paragraphs be meaningful on their own without the context of the full article? On our project, our familiar design-system thinking often led us to want to create content models that would slice content into disparate chunks to fit the web-centric layout. This had a similar impact to an article that were to have been separated from its headline. Because we were slicing content into standalone pieces based on layout, content that belonged together became difficult to manage and nearly impossible for multiple delivery channels to understand.

To illustrate, let’s look at how connecting related content applies in a real-world scenario. The design team for our customer presented a complex layout for a software product page that included multiple tabs and sections. Our instincts were to follow suit with the content model. Shouldn’t we make it as easy and as flexible as possible to add any number of tabs in the future?

Because our design-system instincts were so familiar, it felt like we had needed a content type called “tab section” so that multiple tab sections could be added to a page. Each tab section would display various types of content. One tab might provide the software’s overview or its specifications. Another tab might provide a list of resources. 

Our inclination to break down the content model into “tab section” pieces would have led to an unnecessarily complex model and a cumbersome editing experience, and it would have also created content that couldn’t have been understood by additional delivery channels. For example, how would another system have been able to tell which “tab section” referred to a product’s specifications or its resource list—would that other system have to have resorted to counting tab sections and content blocks? This would have prevented the tabs from ever being reordered, and it would have required adding logic in every other delivery channel to interpret the design system’s layout. Furthermore, if the customer were to have no longer wanted to display this content in a tab layout, it would have been tedious to migrate to a new content model to reflect the new page redesign.

We had a breakthrough when we discovered that our customer had a specific purpose in mind for each tab: it would reveal specific information such as the software product’s overview, specifications, related resources, and pricing. Once implementation began, our inclination to focus on what’s visual and familiar had obscured the intent of the designs. With a little digging, it didn’t take long to realize that the concept of tabs wasn’t relevant to the content model. The meaning of the content that they were planning to display in the tabs was what mattered.

In fact, the customer could have decided to display this content in a different way—without tabs—somewhere else. This realization prompted us to define content types for the software product based on the meaningful attributes that the customer had wanted to render on the web. There were obvious semantic attributes like name and description as well as rich attributes like screenshots, software requirements, and feature lists. The software’s product information stayed together because it wasn’t sliced across separate components like “tab sections” that were derived from the content’s presentation. Any delivery channel—including future ones—could understand and present this content.

Conclusion

In this omnichannel marketing project, we discovered that the best way to keep our content model on track was to ensure that it was semantic (with type and attribute names that reflected the meaning of the content) and that it kept content together that belonged together (instead of fragmenting it). These two concepts curtailed our temptation to shape the content model based on the design. So if you’re working on a content model to support an omnichannel content strategy—or even if you just want to make sure that Google and other interfaces understand your content—remember:

• A design system isn’t a content model. Team members may be tempted to conflate them and to make your content model mirror your design system, so you should protect the semantic value and contextual structure of the content strategy during the entire implementation process. This will let every delivery channel consume the content without needing a magic decoder ring.
• If your team is struggling to make this transition, you can still reap some of the benefits by using Schema.org–based structured data in your website. Even if additional delivery channels aren’t on the immediate horizon, the benefit to search engine optimization is a compelling reason on its own.
• Additionally, remind the team that decoupling the content model from the design will let them update the designs more easily because they won’t be held back by the cost of content migrations. They’ll be able to create new designs without the obstacle of compatibility between the design and the content, and ​they’ll be ready for the next big thing. 

By rigorously advocating for these principles, you’ll help your team treat content the way that it deserves—as the most critical asset in your user experience and the best way to connect with your audience.

Antiracist economist Kim Crayton says that “intention without strategy is chaos.” We’ve discussed how our biases, assumptions, and inattention toward marginalized and vulnerable groups lead to dangerous and unethical tech—but what, specifically, do we need to do to fix it? The intention to make our tech safer is not enough; we need a strategy.

This chapter will equip you with that plan of action. It covers how to integrate safety principles into your design work in order to create tech that’s safe, how to convince your stakeholders that this work is necessary, and how to respond to the critique that what we actually need is more diversity. (Spoiler: we do, but diversity alone is not the antidote to fixing unethical, unsafe tech.)

The process for inclusive safety

When you are designing for safety, your goals are to:

• identify ways your product can be used for abuse,
• design ways to prevent the abuse, and
• provide support for vulnerable users to reclaim power and control.

The Process for Inclusive Safety is a tool to help you reach those goals (Fig 5.1). It’s a methodology I created in 2018 to capture the various techniques I was using when designing products with safety in mind. Whether you are creating an entirely new product or adding to an existing feature, the Process can help you make your product safe and inclusive. The Process includes five general areas of action:

• Conducting research
• Creating archetypes
• Brainstorming problems
• Designing solutions
• Testing for safety

The Process is meant to be flexible—it won’t make sense for teams to implement every step in some situations. Use the parts that are relevant to your unique work and context; this is meant to be something you can insert into your existing design practice.

And once you use it, if you have an idea for making it better or simply want to provide context of how it helped your team, please get in touch with me. It’s a living document that I hope will continue to be a useful and realistic tool that technologists can use in their day-to-day work.

If you’re working on a product specifically for a vulnerable group or survivors of some form of trauma, such as an app for survivors of domestic violence, sexual assault, or drug addiction, be sure to read Chapter 7, which covers that situation explicitly and should be handled a bit differently. The guidelines here are for prioritizing safety when designing a more general product that will have a wide user base (which, we already know from statistics, will include certain groups that should be protected from harm). Chapter 7 is focused on products that are specifically for vulnerable groups and people who have experienced trauma.

Step 1: Conduct research

Design research should include a broad analysis of how your tech might be weaponized for abuse as well as specific insights into the experiences of survivors and perpetrators of that type of abuse. At this stage, you and your team will investigate issues of interpersonal harm and abuse, and explore any other safety, security, or inclusivity issues that might be a concern for your product or service, like data security, racist algorithms, and harassment.

Broad research

Your project should begin with broad, general research into similar products and issues around safety and ethical concerns that have already been reported. For example, a team building a smart home device would do well to understand the multitude of ways that existing smart home devices have been used as tools of abuse. If your product will involve AI, seek to understand the potentials for racism and other issues that have been reported in existing AI products. Nearly all types of technology have some kind of potential or actual harm that’s been reported on in the news or written about by academics. Google Scholar is a useful tool for finding these studies.

Specific research: Survivors

When possible and appropriate, include direct research (surveys and interviews) with people who are experts in the forms of harm you have uncovered. Ideally, you’ll want to interview advocates working in the space of your research first so that you have a more solid understanding of the topic and are better equipped to not retraumatize survivors. If you’ve uncovered possible domestic violence issues, for example, the experts you’ll want to speak with are survivors themselves, as well as workers at domestic violence hotlines, shelters, other related nonprofits, and lawyers.

Especially when interviewing survivors of any kind of trauma, it is important to pay people for their knowledge and lived experiences. Don’t ask survivors to share their trauma for free, as this is exploitative. While some survivors may not want to be paid, you should always make the offer in the initial ask. An alternative to payment is to donate to an organization working against the type of violence that the interviewee experienced. We’ll talk more about how to appropriately interview survivors in Chapter 6.

Specific research: Abusers

It’s unlikely that teams aiming to design for safety will be able to interview self-proclaimed abusers or people who have broken laws around things like hacking. Don’t make this a goal; rather, try to get at this angle in your general research. Aim to understand how abusers or bad actors weaponize technology to use against others, how they cover their tracks, and how they explain or rationalize the abuse.

Step 2: Create archetypes

Once you’ve finished conducting your research, use your insights to create abuser and survivor archetypes. Archetypes are not personas, as they’re not based on real people that you interviewed and surveyed. Instead, they’re based on your research into likely safety issues, much like when we design for accessibility: we don’t need to have found a group of blind or low-vision users in our interview pool to create a design that’s inclusive of them. Instead, we base those designs on existing research into what this group needs. Personas typically represent real users and include many details, while archetypes are broader and can be more generalized.

The abuser archetype is someone who will look at the product as a tool to perform harm (Fig 5.2). They may be trying to harm someone they don’t know through surveillance or anonymous harassment, or they may be trying to control, monitor, abuse, or torment someone they know personally.

The survivor archetype is someone who is being abused with the product. There are various situations to consider in terms of the archetype’s understanding of the abuse and how to put an end to it: Do they need proof of abuse they already suspect is happening, or are they unaware they’ve been targeted in the first place and need to be alerted (Fig 5.3)?

You may want to make multiple survivor archetypes to capture a range of different experiences. They may know that the abuse is happening but not be able to stop it, like when an abuser locks them out of IoT devices; or they know it’s happening but don’t know how, such as when a stalker keeps figuring out their location (Fig 5.4). Include as many of these scenarios as you need to in your survivor archetype. You’ll use these later on when you design solutions to help your survivor archetypes achieve their goals of preventing and ending abuse.

It may be useful for you to create persona-like artifacts for your archetypes, such as the three examples shown. Instead of focusing on the demographic information we often see in personas, focus on their goals. The goals of the abuser will be to carry out the specific abuse you’ve identified, while the goals of the survivor will be to prevent abuse, understand that abuse is happening, make ongoing abuse stop, or regain control over the technology that’s being used for abuse. Later, you’ll brainstorm how to prevent the abuser’s goals and assist the survivor’s goals.

And while the “abuser/survivor” model fits most cases, it doesn’t fit all, so modify it as you need to. For example, if you uncovered an issue with security, such as the ability for someone to hack into a home camera system and talk to children, the malicious hacker would get the abuser archetype and the child’s parents would get survivor archetype.

Step 3: Brainstorm problems

After creating archetypes, brainstorm novel abuse cases and safety issues. “Novel” means things not found in your research; you’re trying to identify completely new safety issues that are unique to your product or service. The goal with this step is to exhaust every effort of identifying harms your product could cause. You aren’t worrying about how to prevent the harm yet—that comes in the next step.

How could your product be used for any kind of abuse, outside of what you’ve already identified in your research? I recommend setting aside at least a few hours with your team for this process.

If you’re looking for somewhere to start, try doing a Black Mirror brainstorm. This exercise is based on the show Black Mirror, which features stories about the dark possibilities of technology. Try to figure out how your product would be used in an episode of the show—the most wild, awful, out-of-control ways it could be used for harm. When I’ve led Black Mirror brainstorms, participants usually end up having a good deal of fun (which I think is great—it’s okay to have fun when designing for safety!). I recommend time-boxing a Black Mirror brainstorm to half an hour, and then dialing it back and using the rest of the time thinking of more realistic forms of harm.

After you’ve identified as many opportunities for abuse as possible, you may still not feel confident that you’ve uncovered every potential form of harm. A healthy amount of anxiety is normal when you’re doing this kind of work. It’s common for teams designing for safety to worry, “Have we really identified every possible harm? What if we’ve missed something?” If you’ve spent at least four hours coming up with ways your product could be used for harm and have run out of ideas, go to the next step.

It’s impossible to guarantee you’ve thought of everything; instead of aiming for 100 percent assurance, recognize that you’ve taken this time and have done the best you can, and commit to continuing to prioritize safety in the future. Once your product is released, your users may identify new issues that you missed; aim to receive that feedback graciously and course-correct quickly.

Step 4: Design solutions

At this point, you should have a list of ways your product can be used for harm as well as survivor and abuser archetypes describing opposing user goals. The next step is to identify ways to design against the identified abuser’s goals and to support the survivor’s goals. This step is a good one to insert alongside existing parts of your design process where you’re proposing solutions for the various problems your research uncovered.

Some questions to ask yourself to help prevent harm and support your archetypes include:

• Can you design your product in such a way that the identified harm cannot happen in the first place? If not, what roadblocks can you put up to prevent the harm from happening?
• How can you make the victim aware that abuse is happening through your product?
• How can you help the victim understand what they need to do to make the problem stop?
• Can you identify any types of user activity that would indicate some form of harm or abuse? Could your product help the user access support?

In some products, it’s possible to proactively recognize that harm is happening. For example, a pregnancy app might be modified to allow the user to report that they were the victim of an assault, which could trigger an offer to receive resources for local and national organizations. This sort of proactiveness is not always possible, but it’s worth taking a half hour to discuss if any type of user activity would indicate some form of harm or abuse, and how your product could assist the user in receiving help in a safe manner.

That said, use caution: you don’t want to do anything that could put a user in harm’s way if their devices are being monitored. If you do offer some kind of proactive help, always make it voluntary, and think through other safety issues, such as the need to keep the user in-app in case an abuser is checking their search history. We’ll walk through a good example of this in the next chapter.

Step 5: Test for safety

The final step is to test your prototypes from the point of view of your archetypes: the person who wants to weaponize the product for harm and the victim of the harm who needs to regain control over the technology. Just like any other kind of product testing, at this point you’ll aim to rigorously test out your safety solutions so that you can identify gaps and correct them, validate that your designs will help keep your users safe, and feel more confident releasing your product into the world.

Ideally, safety testing happens along with usability testing. If you’re at a company that doesn’t do usability testing, you might be able to use safety testing to cleverly perform both; a user who goes through your design attempting to weaponize the product against someone else can also be encouraged to point out interactions or other elements of the design that don’t make sense to them.

You’ll want to conduct safety testing on either your final prototype or the actual product if it’s already been released. There’s nothing wrong with testing an existing product that wasn’t designed with safety goals in mind from the onset—“retrofitting” it for safety is a good thing to do.

Remember that testing for safety involves testing from the perspective of both an abuser and a survivor, though it may not make sense for you to do both. Alternatively, if you made multiple survivor archetypes to capture multiple scenarios, you’ll want to test from the perspective of each one.

As with other sorts of usability testing, you as the designer are most likely too close to the product and its design by this point to be a valuable tester; you know the product too well. Instead of doing it yourself, set up testing as you would with other usability testing: find someone who is not familiar with the product and its design, set the scene, give them a task, encourage them to think out loud, and observe how they attempt to complete it.

Abuser testing

The goal of this testing is to understand how easy it is for someone to weaponize your product for harm. Unlike with usability testing, you want to make it impossible, or at least difficult, for them to achieve their goal. Reference the goals in the abuser archetype you created earlier, and use your product in an attempt to achieve them.

For example, for a fitness app with GPS-enabled location features, we can imagine that the abuser archetype would have the goal of figuring out where his ex-girlfriend now lives. With this goal in mind, you’d try everything possible to figure out the location of another user who has their privacy settings enabled. You might try to see her running routes, view any available information on her profile, view anything available about her location (which she has set to private), and investigate the profiles of any other users somehow connected with her account, such as her followers.

If by the end of this you’ve managed to uncover some of her location data, despite her having set her profile to private, you know now that your product enables stalking. Your next step is to go back to step 4 and figure out how to prevent this from happening. You may need to repeat the process of designing solutions and testing them more than once.

Survivor testing

Survivor testing involves identifying how to give information and power to the survivor. It might not always make sense based on the product or context. Thwarting the attempt of an abuser archetype to stalk someone also satisfies the goal of the survivor archetype to not be stalked, so separate testing wouldn’t be needed from the survivor’s perspective.

However, there are cases where it makes sense. For example, for a smart thermostat, a survivor archetype’s goals would be to understand who or what is making the temperature change when they aren’t doing it themselves. You could test this by looking for the thermostat’s history log and checking for usernames, actions, and times; if you couldn’t find that information, you would have more work to do in step 4.

Another goal might be regaining control of the thermostat once the survivor realizes the abuser is remotely changing its settings. Your test would involve attempting to figure out how to do this: are there instructions that explain how to remove another user and change the password, and are they easy to find? This might again reveal that more work is needed to make it clear to the user how they can regain control of the device or account.

Stress testing

To make your product more inclusive and compassionate, consider adding stress testing. This concept comes from Design for Real Life by Eric Meyer and Sara Wachter-Boettcher. The authors pointed out that personas typically center people who are having a good day—but real users are often anxious, stressed out, having a bad day, or even experiencing tragedy. These are called “stress cases,” and testing your products for users in stress-case situations can help you identify places where your design lacks compassion. Design for Real Life has more details about what it looks like to incorporate stress cases into your design as well as many other great tactics for compassionate design.

CSS involves creating containers. In fact, the whole website is made of containers, from the website viewport to components on a webpage. However, every now and then a new element appears that prompts us to reevaluate our style philosophy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. Additionally, dual-screen or portable devices force us to consider how to make the most of the available room in various device configurations.

These latest changes to the website platform have made it both more difficult and fascinating to create products. They’re wonderful opportunities for us to break out of our triangular boxes.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Democratic Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they are flexible, linkable, and stable, just like websites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it’s challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What a standard pc PWA app looks like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color home ), but that’s about it.

What if we could assume differently and regain the full glass of the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

The Window Controls Overlay offers precisely this. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and screen controls

Let’s get started with an explanation of what the window and name controls are.

The title bar is the place displayed at the top of an game glass, which frequently contains the phone’s name. The controls are displayed at the top of an app’s window, along with the buttons that enable it to reduce, maximize, nearby, and close it.

Window Controls Overlay removes the natural barrier of the name bar and windows controls areas. The title bar and glass control buttons can be overlayed on top of the user’s internet material, allowing it to free up the entire height of the game window.

If you are reading this article on a desktop computer, take a quick look at other apps. Chances are they’re already doing something similar to this. In fact, the web browser you are using uses the top area to display tabs.

Spotify displays album artwork to the top of the application window at the very top.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience across a variety of platforms without having a negative impact on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using only CSS and a single HTML element in this straightforward CSS playground.

The app has two pages. The first lists the CSS designs you’ve already created:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on the desktop because I added a straightforward web manifest and service worker. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area reached the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

enabling overlay for window control

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been incorporated into Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of window controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing required is for this manifest change to transform the window controls into an overlay and make the title bar disappear.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

Here is how the app currently looks:

Our logo, search field, and NEW button are now partially covered by the window controls, but the title bar has been removed, which is what we wanted. Our layout now begins at the top of the window.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been introduced along with the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. Our header, which includes the logo, search bar, and NEW button, will be placed using two of the variables in our case.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The interface resembles a native app much more.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are a few ways to define it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in a variety of ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

Here is the method we’ll employ:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can use the Window Controls Overlay feature to move the window, but this area becomes limited to where the control buttons are, and they must carefully aim between these buttons to move the window. However, the title bar offers a sizable area for users to click and drag.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to make any feature of the app a dragging target for the window:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. Let’s take a different approach, then. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be using the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. In our situation, there wouldn’t be enough room for the search field, logo, and button to fit because the user made the window very narrow. We would want to push them a little lower.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

The API offers three intriguing features:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangelets us know when something changes in size or visibility.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• We can see the title bar area on different operating systems, which is great because Mac and Windows have different title bar sizes. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can use the above CSS code to move our header down and move the thumbnails down in accordance with this.

Thirty pixels of exciting design opportunities

Our straightforward demo app was transformed into something that felt much more connected to desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room, and it presents challenges for using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. To make it easier for us web authors to integrate more and more fully with those devices, new features are added to the web platform. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. We can now think outside the rectangular box when building for the web.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

You can open issues on the spec’s repository if you get the chance to try the Window Controls Overlay feature and have feedback on it. It’s still early in the development of this feature, and you can help make it even better. Or you can look at this demo app and its source code, the feature’s existing documentation, or the feature’s existing documentation.

Here’s the strategy. To encourage stakeholders to determine high-risk assumptions and buried complexity, you must work with them to mobilize them as much as you do to obtain answers from users. Generally, you need to make them think it’s their plan.

By bringing the group up around two straightforward issues, I’ll show you how to collectively introduce alignment and cracks in the team’s shared knowledge.

1. What are the items?
2. What are the associations between those things?

A cross between screen design and analysis

These two issues correlate to the first two methods of the ORCA approach, which may be your new best friend when it comes to reducing speculation. What’s ORCA, then? Glad you asked.

ORCA stands for Things, Relationships, CTAs, and Values, and it outlines a process for creating good object-oriented user experience. My style philosophy is based on object-oriented UX. ORCA is an iterative strategy for synthesizing person study into an elegant fundamental foundation to help monitor and conversation design. My work as a UX designer has become more creative, productive, successful, fun, proper, and meaningful thanks to OOUX and ORCA.

The ORCA process has four iterative rounds and a whopping fifteen steps. In each round we get more clarity on our Os, Rs, Cs, and As.

I occasionally refer to ORCA as a “garbage in, garbage out” procedure. To ensure that the testable prototype produced in the final round actually tests well, the process needs to be fed by good research. The ORCA process’s beginning serves another purpose: it enables you to justify the need for research if you don’t have a lot of it.

In other words, the ORCA process serves as a gauntlet between research and design. You can gracefully ride the killer whale from research to design with good research. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting back in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It begins to reveal what this timeless comic so skillfully demonstrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. Every decision-maker is confident in their own mental picture, which is another reason why we frequently can’t sell research.

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

However, it is crucial how we go about doing this. However much we might want to, we can’t just tell everyone,” YOU ARE WRONG”! Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders accept responsibility for their beliefs and understanding gaps, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Let’s say your users are physicians. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying:” We need to understand doctors better! What bothers them the most? How do they use the current app”? But here’s the issue with that. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This conversation is more appropriate for facilitating than engaging in. Let’s listen in:

” Wait a sec, how frequently do doctors share patients?” Does a patient in this system have primary and secondary doctors”?

” Can a patient even have more than one primary doctor”?

Is it a “primary doctor” or “primary caregiver” ?Can’t that position be considered a nurse practitioner?

” No, caregivers are something else… That’s the patient’s family contacts, right”?

” So are caregivers in scope for this redesign”?

” Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment”?

We are currently traveling somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? The diabolical goal is to gently and diplomatically shake their confidence.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And most likely as a result, this software product will become more confusing, complicated, and unintuitive.

The two questions

But how do we approach these kinds of contentious inquiries diplomatically, effectively, collaboratively, and reliably?

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the items?
2. What are the associations between those things?

In practice, getting to these answers is easier said than done. I’m going to demonstrate how these two straightforward questions can serve as the starting point for an Object Definition Workshop. During this workshop, these” seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Noun foraging prep work

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders ( and entire cross-functional team, hopefully ). But first, you need to do some prep work.

In essence, search for nouns that are specific to your project’s business or industry and from at least a few sources. I call this noun foraging.

Just a few excellent noun foraging sources can be found here:

• the product’s marketing site
• the product’s competitors ‘ marketing sites ( competitive analysis, anyone? )
• the labeled version of the already-existing product!
• user interview transcripts
• notes from interviews with stakeholders or vision documents from stakeholders

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. Use those if all you have are a marketing website, some screenshots of the current legacy system, and access to customer service chat logs.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them ( preferably on blue sticky notes if you’ll be creating an object map later! …

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Consider a library app, for instance. Is “book” an object?

Can you think of a few attributes for this potential object? Title, author, publish date … Yep, it has structure. Check!

What are some instances of this conceivable “book” object? Can you name a few? Check! The Alchemist, Ready Player One, Everybody Poops, OK!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library … Check, check, check!

Concentrate on capturing the nouns with SIP as you go noun foraging. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is using your dropdown to play in your digital space! They are coming for the VALUABLE THINGS and what they can do with them. We are attempting to identify those things or objects.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

I’d like to take a look at my own email client, which is Gmail. I’d then look at Outlook and the new HEY email. I would examine Hotmail, Yahoo, and even Basecamp and other’email replacers’. I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

( Before moving on, feel free to explore this hypothetical product’s potential and then scroll down to see how closely our lists correspond. Just don’t get lost in your own emails! Rejoice to me again!

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact groups
• attachment
• Google doc file / other integrated file
• newsletter? ( HEY views this in a different way )
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. It might be automation or a client in our email example. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: Here are some real nouns that I needed to clarify while working on my own projects in the past.

• Record Locator
• Incentive House
• Augmented Line Item
• Curriculum-Based Measurement Probe

A list of nouns that represent potential objects and a short list of nouns that need to be further defined are really all you need to prepare for the workshop session.

Facilitate an Object Definition Workshop

You could start your workshop by doing noun foraging; this can be done in concert. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Your friend here is affinity mapping!

If your team is short on time and might be reluctant to do this kind of grunt work ( which is usually the case ) do your own noun foraging beforehand, but be prepared to show your work. I enjoy showing screenshots of documents and screens with all the highlighted nouns. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. You don’t need to tell them you‘re looking for gaps in the team’s understanding so that you can demonstrate the need for more user research; that will be our little secret. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers.

Let the whack-a-mole question then start.

1. What is this thing?

Want to have genuine fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Then, have everyone present their cards at once, and see if you get different definitions (you will ). This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty appears, quietly ( but clearly ) begin a parking lot with “open questions.” � �

Here’s a fantastic follow-up to solidify definitions:

2. Do our users know what these things are? What do users refer to this as?

Stakeholder 1: They probably call email clients “apps”. But I’m not certain.

Stakeholder 2: Automations are often called “workflows”, I think. Or, maybe users think workflows are something different.

Ask the group to decide whether to use only that term in the near future if it becomes more user-friendly. This way, the team can better align to the users ‘ language and mindset.

Okay, let’s get to the next part.

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Do these two things exist the same? Or are these different? If they are different, how are they different?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Absolutely.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images.

Continue to expand your expanding glossary of terms. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Do saved responses and templates have any connection to each other?

Stakeholder 3: Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? Does that occur when the user is creating the saved response? Or when they apply the saved response to an email? How does that actually function?

Listen. Capture uncertainty. When the number of “open questions” reaches a critical mass, pause and begin asking questions of groups or individuals. Some questions might be for the dev team ( hopefully at least one developer is in the room with you ). Someone who couldn’t make it to the workshop might have a question. And many questions will need to be labeled “user”.

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next query makes the team’s attention narrower so that it can focus on what your users are most interested in. You can simply ask,” Are saved responses in scope for our first release”?, but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to arrange these items either in small breakout groups or independently according to their importance. Then, like you did with the definitions, have everyone reveal their sort order at once. Unsurprisingly, it’s not unusual for the VP to place something like” saved responses” at the top of the list while everyone else places it at the bottom. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. The three groups ‘ wildly different sorting patterns were displayed on the whiteboard.

The CEO nodded his head and said,” This is why we haven’t been able to move forward in two years,” taking a step back.

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects ‘ relationships

We’ve already attempted to figure out what two things are different, but this time, we need to ask the team about every possible connection. For each object, ask how it relates to all the other objects. In what ways are the objects connected? Pull out your dependable boxes and arrows technique to see all the connections. Here, we are connecting our objects with verbs. I prefer to keep my verbs to simple statements like “has a” and “has many”

This system modeling activity brings up all sorts of new questions:

• Can attachments be included in a saved response?
• Can a saved response use a template? If so, can the user override the template if an email uses a saved response with a template?
• Do users want to see all the emails they sent that included a particular attachment? For example,” show me all the emails I sent with ProfessionalImage. attached .jpg I’ve changed my professional photo and I want to alert everyone to update it”.

The workshop participants might provide solid responses directly. Great! Capture that new shared understanding. However, as uncertainty arises, keep adding new questions to your expanding parking lot.

Light the fuse

You’ve set up the floodgates strategically so that the explosives can be seen everywhere. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Have the group reflect on the list of open questions before the workshop ends. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

Your final step is now. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out”?

With this approach, we are making our decision-makers fight for user research because they themselves define questions as high-risk. Sorry, not sorry.

This is your moment of truth. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions.

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions are non-ending and don’t force the user to choose any default responses.

Final words: Hold the screen design!

Seriously, if you’re ever going to design screens again, make sure you first address these fundamental inquiries: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and ( it almost feels like a bonus at this point! ) users will be more receptive to what you put out into the world.

I sincerely hope this will give you the time and money to spend talking to your users and getting a clear understanding of what you are designing before you begin creating screens. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots.

Good luck, everyone! Now go sell research!