Category: Blog

Some members of the elite running group were beginning to think it was impossible to run a hour in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

But on May 6, 1956, Roger Bannister caught all off guard. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world then knew that the four-minute hour was possible thanks to this change in the standard. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Therefore, in the same race, three athletes managed to cross the four-minute challenge together. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We do a lot more when we think something is possible, and we only think it can be done when we see someone else doing it once more. As for human running speed, we also think there are strict guidelines for how a website should do.

Establishing requirements for a lasting web

The key indicators of climate performance in most big sectors are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. But, we are not required to follow any specific environmental standards in the world of websites and apps, and we have only recently developed the tools and methods to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the CO₂ output of a website product. We can’t assess the pollutants coming out of the exhaust valves on our laptops. The pollution coming from power plants that burn coal and oil are far apart, out of sight, and out of mind. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon emissions, then we need to get what we can estimate. The following are the main elements that could be used as coal pollution gauges:

1. Transfer of data
2. Coal content of light

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a great example of how much energy is consumed and how much carbon is released. As a rule of thumb, the more data transferred, the more energy used in the data center, telecoms networks, and end user devices.

The easiest way to calculate data transfer for a single visit for web pages is to measure the page weight, which is the page’s transfer size in kilobytes when someone first visits the page. It’s fairly easy to measure using the developer tools in any modern web browser. Statistics for the total data transfer of any web application are frequently included in your web hosting account ( Fig. 2.1 ).

The nice thing about page weight as a metric is that it allows us to compare the efficiency of web pages on a level playing field without confusing the issue with constantly changing traffic volumes.

A large scope is required to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for roughly half of this data transfer, making them the single biggest contributor to carbon emissions on a typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While the majority of technologies, including the underlying technology of the web like data centers and transmission networks, become more and more energy efficient, websites themselves become less effective as time goes on.

You might be aware of the project team’s focus on creating faster user experiences using the concept of performance budgeting. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than vague suggestions, much like speed limits while driving, so the goal should always be to come within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use competitor page weights and the website’s current layout to compare it to. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

We could start looking at the transferability of our web pages for repeat visitors if we want to take it one step further. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, visitors who load the same page more frequently are likely to have a high percentage of the files cached in their browser, which means they don’t need to move all the files on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. Moving beyond the first visit and measuring page weight budgets for scenarios beyond this level of detail can help us learn even more about how to optimize efficiency for users who regularly visit our pages.

Page weight budgets are easy to track throughout a design and development process. Although they don’t actually provide direct information on carbon emissions and energy consumption, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of reducing web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Coal content of light

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” is used to describe how many grams of carbon are produced for every kilowatt-hour of electricity (gCO₂/k Wh ). This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, where energy from a variety of sources is combined with various levels of carbon intensity. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will have significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

However, we don’t want to move our servers too far away from our users because it requires energy to transmit data through the telecom’s networks, and the more energy is used. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and measure the distance between that location and the data center that our hosting company uses as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how significantly lessening the distance and energy needed to transmit the data would be if it was hosted somewhere in North America, ideally on the West Coast. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. A tool my team created accomplishes this by measuring the data transfer over the wire when a web page is loaded, calculating the associated electricity consumption, and then converting that data into a CO₂ figure ( Fig. ₂.4). It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to improve it and tailor the data more appropriately to your project’s unique features.

With the ability to calculate carbon emissions for our projects, we could even set up carbon budgets as well. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds a layer of abstraction that isn’t as intuitive, carbon budgets do focus our minds on the main thing we’re trying to reduce, which supports the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational burden is increasingly shifting from the data center to the users ‘ devices, whether they are smart TVs, tablets, laptops, phones, tablets, laptops, or other front-end web technologies. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React make it possible to create applications where the” thinking” process is performed either partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more computation in a web browser requires more energy to be used by the user’s devices. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally exclude those who have older, slower devices and make the batteries on phones and laptops drain more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. The poorest members of society are also under disproportionate financial burdens due to this, which is not just bad for the environment.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the Safari browser’s developer console ( Fig. 2.5 ) is one of the tools we currently use.

You know what happens when your computer’s cooling fans start spinning so frantically that you suspect it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating based on the percentage of CPU used and how long it took the web page to load. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

Here’s the key. To find stakeholders to determine high-risk assumptions and buried complexity, you must first convince them to do so so that they become just as motivated as you are to receive user-response. Generally, you need to make them think it’s their plan.

By bringing the group up around two straightforward issues, I’ll show you how to collectively introduce alignment and cracks in the group’s shared understanding in this article.

1. What are the materials?
2. What are the interactions between those things?

A cross between camera design and analysis

These two issues correlate to the first two methods of the ORCA approach, which may be your new best friend when it comes to reducing speculation. What’s ORCA, waited, what’s that? Glad you asked.

ORCA stands for Things, Relationships, CTAs, and Values, and it outlines a process for creating good object-oriented user experience. My style idea is oriented UX. ORCA is an iterative strategy for synthesizing person study into an elegant fundamental foundation to help monitor and conversation design. My work as a UX designer has become more creative, productive, successful, fun, proper, and meaningful thanks to OOUX and ORCA.

The ORCA approach has four incremental shells and a staggering fifteen steps. In each round we get more precision on our System, Rupees, Computer, and As.

ORCA is sometimes described as a “garbage in, garbage out” procedure. To ensure that the testable prototype produced in the final round actually tests well, the process needs to be fed by good research. However, the beginning of the ORCA process serves another purpose: it helps you sell the need for research if you don’t have a ton of research.

In other words, the ORCA process serves as a gauntlet between research and design. You can gracefully ride a killer whale from research to design with good research. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting back in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It begins to reveal what this timeless comic so skillfully demonstrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. Every decision-maker is confident in their own mental picture, which is another reason why we frequently can’t sell research.

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

However, how we go about doing this is crucial. However much we might want to, we can’t just tell everyone,” YOU ARE WRONG”! Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders accept responsibility for their beliefs and understanding gaps, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Let’s say your users are physicians. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying:” We need to understand doctors better! What are the issues they face? How do they use the current app”? Here’s the issue with that, though. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This is more similar to the conversation you need to facilitate. Let’s listen in:

” Wait a sec, how frequently do doctors share patients?” Does a patient in this system have primary and secondary doctors”?

” Can a patient even have more than one primary doctor”?

Is it a “primary doctor” or “primary caregiver” ?Can’t that position be considered a nurse practitioner?

” No, caregivers are something else… That’s the patient’s family contacts, right”?

” So are caregivers in this redesign’s scope”?

” Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment”?

We are currently traveling somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? The diabolical goal is to gently and diplomatically shake their confidence.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And most likely as a result of this, software will be more confusing, complicated, and less intuitive.

The two questions

But how do we approach these types of contentious inquiries diplomatically, effectively, collaboratively, and reliably?

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the materials?
2. What are the interactions between those things?

In practice, getting to these answers is easier said than done. I’m going to demonstrate how these two straightforward questions can serve as the starting point for an Object Definition Workshop. During this workshop, these” seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Noun foraging prep work

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders ( and entire cross-functional team, hopefully ). But first, you need to do some prep work.

In essence, look for nouns that are specific to the subject matter of your project’s business or industry and use at least a few sources. I call this noun foraging.

Just a few excellent noun foraging sources can be found:

• the product’s marketing site
• the product’s competitors ‘ marketing sites ( competitive analysis, anyone? )
• the already-existing product ( check the labels! )!
• user interview transcripts
• vision documents or notes from stakeholder interviews

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. Use those if all you have is a marketing website, some screenshots of the current legacy system, and access to customer service chat logs.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them ( preferably on blue sticky notes if you’ll be creating an object map later! …

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Consider a library app, for instance. Is “book” an object?

Can you think of a few attributes for this potential object? Title, author, publish date … Yep, it has structure. Check!

What are some illustrations of this potential “book” object, for instance? Can you name a few? Check out The Alchemist, Ready Player One, and Everybody Poops!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library … Check, check, check!

Focus on capturing the nouns that have SIP as you are noun foraging. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is using your dropdown to play in your digital space! They are coming for the VALUABLE THINGS and what they can do with them. These things, or objects, are what we are trying to identify.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

I’d like to take a look at my own email client, which is Gmail. I’d then look at Outlook and the new HEY email. I would examine Hotmail, Yahoo, and even Basecamp and other’email replacers’. I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

( Before moving on, feel free to go noun foraging for this fictitious product as well, and then scroll down to see how closely our lists correspond. Just don’t get lost in your own emails! Rejoice to me again!

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact groups
• attachment
• Google doc file / other integrated file
• newsletter? ( HEY views this in a different way )
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. It might be automation or a client in our email example. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: Here are some real nouns that I needed to clarify while working on my own projects in the past.

• Record Locator
• Home Incentive
• Augmented Line Item
• Curriculum-Based Measurement Probe

A list of nouns that represent potential objects and a short list of nouns that need to be further defined are really all you need to prepare for the workshop session.

Facilitate an Object Definition Workshop

Noun foraging can be used as a starting point for your workshop; it can be done in concert. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Here, affinity mapping is your friend!

If your team is short on time and might be reluctant to do this kind of grunt work ( which is usually the case ) do your own noun foraging beforehand, but be prepared to show your work. I enjoy showing screenshots of documents and screens with all the highlighted nouns. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. We’ll keep that a secret; you just need to let them know that you‘re looking for gaps in the team’s understanding so that you can demonstrate the need for more user research. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers.

Let the whack-a-mole question then start.

1. What is this thing?

Want some genuine fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Then, have everyone present their cards at once, and see if you get different definitions (you will ). This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty appears, quietly ( but clearly ) begin a parking lot with “open questions.” � �

Here’s a fantastic follow-up to solidify definitions:

2. Do our users know what these things are? What do users refer to this as?

Stakeholder 1: They probably call email clients “apps”. But I’m not certain.

Stakeholder 2: Automations are often called “workflows”, I think. Or, maybe users think workflows are something different.

Ask the group to decide whether to use only that term in the near future if it becomes more user-friendly. This way, the team can better align to the users ‘ language and mindset.

Okay, let’s get to the next part.

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Are these the same thing? Or are these different? What distinguishes them from one another if they are different?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Absolutely.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images.

Continue to expand your expanding glossary of terms. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Do saved responses and templates have any connection to each other?

Stakeholder 3: Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? When a user is creating a saved response, does that occur? Or when they apply the saved response to an email? How does that actually function?

Listen. Capture uncertainty. When the number of “open questions” reaches a critical mass, pause to begin asking questions of groups or individuals. Some questions might be for the dev team ( hopefully at least one developer is in the room with you ). One question might be specific for someone who was unable to attend the workshop. And many questions will need to be labeled “user”.

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next query makes the team’s attention narrower so that it can focus on what your users are most interested in. You can simply ask,” Are saved responses in scope for our first release”?, but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to arrange these items either in small breakout groups or independently according to their importance. Then, like you did with the definitions, have everyone reveal their sort order at once. Unsurprisingly, it’s not unusual for the VP to place something like” saved responses” at the top of the list while everyone else places it at the bottom. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. We displayed the three groups ‘ wildly different sort orders on the whiteboard.

The CEO nodded his head and said,” This is why we haven’t been able to move forward in two years.”

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects ‘ relationships

We’ve already tried to figure out what two things are different, but this time, we wanted to ask the team about every possible relationship. For each object, ask how it relates to all the other objects. In what ways are the objects connected? Pull out your dependable boxes and arrows technique to see all the connections. Here, we are connecting our objects with verbs. I prefer to keep my verbs to simple statements like “has a” and “has many”

This system modeling activity brings up all sorts of new questions:

• Can an attachment in a saved response be present?
• Can a saved response use a template? If so, can the recipient override the template if an email uses a saved response with a template?
• Do users want to see all the emails they sent that included a particular attachment? For example,” show me all the emails I sent with ProfessionalImage. attached .jpg I’ve changed my professional photo and I want to alert everyone to update it”.

Strong responses might come directly from the workshop participants. Great! Capture that new shared understanding. However, as uncertainty arises, keep adding new questions to your expanding parking lot.

Light the fuse

You’ve set up the explosives strategically along the floodgates. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Have the group reflect on the list of open questions before the workshop ends. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

This is your final move. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out”?

With this approach, we are making our decision-makers fight for user research because they themselves define questions as high-risk. Sorry, not sorry.

Your moment of truth is right now. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions.

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions are non-ending and don’t force the user to choose any default responses.

Final words: Hold the screen design!

Seriously, if at all possible, if you never design screens again without first addressing these fundamental inquiries: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and ( it almost feels like a bonus at this point! ) users will be more receptive to what you put out into the world.

Before you begin building screens, I sincerely hope this will free up your time and money to spend on user education and clarifying what you are designing. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots.

Good luck, everyone! Now go sell research!

Containers are used to style CSS. In fact, the whole website is made of containers, from the computer viewport to components on a webpage. However, every now and then a new element emerges that prompts us to reevaluate our design philosophy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. And having two or more portable devices forces us to reevaluate how to make the most of the available space in a variety of diverse device positions.

These latest changes to the online platform have made it both more challenging and fascinating to design items. They’re wonderful opportunities for us to break out of our rectangular boxes.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Liberal Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they are flexible, linkable, and stable, just like websites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it’s challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What a standard pc PWA app looks like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color house ), but that’s about it.

What if we could look beyond this field and reclaim the entire screen of the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

This is exactly what the Window Controls Overlay provides. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and glass controls

Let’s get started with an explanation of the screen and title bar settings.

The title bar is the place displayed at the top of an game windows, which frequently contains the phone’s name. The buttons or buttons that are displayed at the top of an app’s window allow you to reduce, increase, or close it.

Window Controls Overlay removes the natural barrier of the name bar and windows controls areas. It frees up the entire game window’s height, allowing the overlay of the subject club and window control buttons on top of the application’s web content.

If you are reading this article on a desktop computer, get a quick glance at another software. Prospects are they’re currently doing something similar to this. In reality, the internet browser you are using uses the major area to display tabs.

Spotify displays album artwork to the top of the application window all the way up.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience on a variety of platforms without having a negative impact on the experience on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using CSS and a single HTML element in a simple CSS playground.

The app has two pages. The first lists the CSS designs you’ve already created:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on desktop because I added a straightforward web manifest and service worker. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area extended to the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

Enabling Window Controls Overlay

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been implemented in Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of window controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing required is for the title bar to disappear and the window controls to become an overlay as a result of this manifest change.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

Here is how the app currently looks:

Our logo, search field, and NEW button are now partially obscured by the window controls because our layout now begins at the top of the window, which is what we wanted.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been added in addition to the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. Our header, which includes the logo, search bar, and NEW button, will be placed using two of the variables in our case.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The interface resembles a native app much more.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are a few ways to define it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in a variety of ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

Here is the method we’ll employ:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can use the Window Controls Overlay feature to move the window, but this area becomes limited to where the control buttons are, and they must very precisely aim between these buttons to move the window. However, the title bar offers a sizable area for users to click and drag.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to make any feature of the app a dragging target for the window:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. Let’s take a different approach, then. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be with the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. In our situation, there won’t be enough room for the search field, logo, and button to fit because the user made the window very narrow. We would need to lower them a little.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

The API offers three intriguing features:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangelets us know when something changes in size or visibility.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• The title bar area is different for different operating systems, which is great because Mac and Windows have different title bar sizes. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can use the above CSS code to move our header down and move the thumbnails down in accordance with this.

Thirty pixels of exciting design opportunities

We were able to convert our simple demo app to something that felt much more connected to desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room, and it presents challenges for using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. New features are added to the web platform to make it easier for web authors to integrate more and more fully with those devices. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. We can now think outside the rectangular box when building for the web.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

You can report bugs to the spec’s repository if you have the chance to try the Window Controls Overlay feature and have feedback on it. It’s still early in the development of this feature, and you can help make it even better. You can also look at this demo app and the source code, the feature’s existing documentation, or the feature’s existing documentation.

The mobile-first design approach is excellent because it concentrates on what the consumer truly needs, is well-practiced, and has become a standard design practice for years. But developing your CSS mobile-first should also be fantastic, too…right?

Well, not necessarily. Classic mobile-first CSS development is based on the principle of overwriting style declarations: you begin your CSS with default style declarations, and overwrite and/or add new styles as you add breakpoints with min-width media queries for larger viewports (for a good overview see “What is Mobile First CSS and Why Does It Rock?”). But all those exceptions create complexity and inefficiency, which in turn can lead to an increased testing effort and a code base that’s harder to maintain. Admit it—how many of us willingly want that?

Mobile-first CSS may yet be the best option for your own projects, but you need to first determine how ideal it is in light of the physical design and user interactions you’re working on. To help you get started, here’s how I go about tackling the elements you need to watch for, and I’ll discuss some alternative remedies if mobile-first doesn’t seem to fit your job.

benefits of mobile-first technology

Some of the benefits of mobile-first CSS growth, and why it’s been the de facto growth strategy for so long, make a lot of sense:

Development pyramid. A good development hierarchy is something you can definitely get from mobile-first; you simply get developing while paying attention to the mobile view.

tested and verified. It’s a tried and tested technique that’s worked for years for a cause: it solves a problem actually also.

prioritizes the portable watch. The mobile view is the simplest and arguably the most significant because it covers all the crucial user journeys and frequently accounts for a higher proportion of user visits ( depending on the project ) ).

Prevents desktop-centric growth. It can be tempting to first focus on the desktop perspective because enhancement is done using pc servers. No one wants to spend their day retrofitting a desktop-centric website to work on mobile devices, but thinking about smart from the beginning prevents us from getting stuck in the future!

Drawbacks of mobile-first

Model declarations can be set at higher breakpoints and therefore overwritten at higher breakpoints:

more complicated stuff. The farther up the target order you go, the more unnecessary script you inherit from lower thresholds.

higher CSS sensitivity A school name declaration with a restored default value for a style has a higher specificity today. This can be a pain on big projects when you want to preserve the CSS candidates as simple as possible.

Takes more analysis analysis. All higher thresholds must be regression tested if CSS changes at lower views ( such as adding a new fashion ).

The browser can’t prioritize CSS downloads. At wider breakpoints, classic mobile-first min-width media queries don’t leverage the browser’s capability to download CSS files in priority order.

Home price issue is overruled by the issue.

There is nothing intrinsically wrong with overwriting principles, CSS was designed to do just that. However, inheriting incorrect principles can be laborious and ineffective, which is counterproductive. When you need to replace styles to restore them to their defaults, which may cause issues after, especially if you’re using a combination of bespoke CSS and energy classes, does this also lead to more style specificity. We won’t be able to use a power course for a design that has been restore with a higher precision.

With this in mind, I’m developing CSS with a focus on the default values much more these days. Since there’s no specific order, and no chains of specific values to keep track of, this frees me to develop breakpoints simultaneously. I concentrate on finding common styles and isolating the specific exceptions in closed media query ranges (that is, any range with a max-width set). 

As you can view each target as a blank slate, this technique opens up some opportunities. If a product’s layout appears to be based on Flexbox at all baselines, that is acceptable and can be coded in the definition style sheet. But if it looks like Grid would be much better for large windows and Flexbox for portable, these can both be done entirely freely when the CSS is put into finished media keyword ranges. Additionally, developing simultaneously requires you to have a thorough knowledge of any given portion in all thresholds right away. This can help identify issues with the design more quickly in the creation process. We don’t want to get stuck down a rabbit hole building a sophisticated component for wireless, and then get the designs for desktop and find they are extremely difficult and inconsistent with the HTML we created for the mobile view!

Although this strategy won’t work for everyone, I urge you to try it. Responsively App, Blisk, and many others are among the many tools available to assist with concurrent development.

Having said that, I don’t feel the order itself is particularly relevant. Stick to the classic development order if you like to concentrate on the mobile view, understand the requirements for other breakpoints, and prefer to work on multiple devices at once. The key is to find common styles and exceptions so that you can include them in the appropriate stylesheet, which is a kind of manual tree-shaking procedure! Personally, I find this a little easier when working on a component across breakpoints, but that’s by no means a requirement.

Closed media query ranges are used in real life

We overwrite the styles in the classic mobile-first CSS, but we can prevent this by using media query ranges. To illustrate the difference ( I’m using SCSS for brevity ), let’s assume there are three visual designs:

• smaller than 768
• from 768 to less than 1024
• 1024 and anything larger

Take a simple example where a block-level element has a default padding of “20px,” which is overwritten at tablet to be “40px” and set back to “20px” on desktop.

.my-block { padding: 20px; @media (min-width: 768px) { padding: 40px; } @media (min-width: 1024px) { padding: 20px; }}

.my-block { padding: 20px; @media (min-width: 768px) and (max-width: 1023.98px) { padding: 40px; }}

The subtle difference is that the mobile-first example sets the default padding to “20px” and then overwrites it at each breakpoint, setting it three times in total. In contrast, the second example sets the default padding to “20px” and only overrides it at the relevant breakpoint where it isn’t the default value (in this instance, tablet is the exception).

The goal is to: 

• Only set styles when needed. 
• Not set them with the expectation of overwriting them later on, again and again. 

To this end, closed media query ranges are our best friend. If we need to make a change to any given view, we make it in the CSS media query range that applies to the specific breakpoint. We’ll be much less likely to introduce unwanted alterations, and our regression testing only needs to focus on the breakpoint we have actually edited. 

Taking the above example, if we find that .my-block spacing on desktop is already accounted for by the margin at that breakpoint, and since we want to remove the padding altogether, we could do this by setting the mobile padding in a closed media query range.

.my-block {  @media (max-width: 767.98px) {    padding: 20px;  }  @media (min-width: 768px) and (max-width: 1023.98px) {    padding: 40px;  }}

The browser default padding for our block is “0,” so instead of adding a desktop media query and using unset or “0” for the padding value (which we would need with mobile-first), we can wrap the mobile padding in a closed media query (since it is now also an exception) so it won’t get picked up at wider breakpoints. At the desktop breakpoint, we won’t need to set any padding style, as we want the browser default value.

Bundling versus separating the CSS

Back in the day, keeping the number of requests to a minimum was very important because the browser's concurrent request limit (typically around six ) was high. In consequence, using image sprites and CSS bundling was the norm, with all the CSS being downloaded as a single stylesheet with the highest priority.

With HTTP/2 and HTTP/3 now on the scene, the number of requests is no longer the big deal it used to be. By using a media query, we can separate the CSS into several files. The obvious benefit of this is that the browser can now request the CSS it currently requires with a higher priority than the CSS it doesn't. This is more performant and can reduce the overall time page rendering is blocked.

What version of HTTP do you use?

Go to your website and open the dev tools in your browser to find out which version of HTTP you're using. Next, select the Network tab and make sure the Protocol column is visible. If "h2" is included in the protocol list, that indicates that HTTP/2 is being used.

Note: To check the Protocol column in your browser's dev tools, right-click any column header ( such as Name ), go to the Network tab, reload your page, and then check the Protocol column.

If your website still uses HTTP/1, please check it out. WHHY!! What are you waiting for? The HTTP/2 user support is excellent.

CSS is split in half.

Separating the CSS into individual files is a worthwhile task. Linking the separate CSS files using the relevant media attribute allows the browser to identify which files are needed immediately (because they’re render-blocking) and which can be deferred. Based on this, it allocates each file an appropriate priority.

In the following example of a website visited on a mobile breakpoint, we can see the mobile and default CSS are loaded with" Highest" priority, as they are currently needed to render the page. The last three CSS files ( print, tablet, and desktop ) are still being downloaded in case they're needed later, but with" Lowest" priority.

Before rendering can begin, the browser will need to download and parse the CSS file when using bundled CSS.

While, as noted, with the CSS separated into different files linked and marked up with the relevant media attribute, the browser can prioritize the files it currently needs. Using closed media query ranges allows the browser to do this at all widths, as opposed to classic mobile-first min-width queries, where the desktop browser would have to download all the CSS with Highest priority. We can’t assume that desktop users always have a fast connection. For instance, in many rural areas, internet connection speeds are still slow. 

Depending on project requirements, the media queries and the number of separate CSS files will vary from project to project, but the example below might look similar.

Depending on the project’s deployment strategy, a change to one file (mobile.css, for example) would only require the QA team to regression test on devices in that specific media query range. Compare that to the prospect of deploying the single bundled site.css file, an approach that would normally trigger a full regression test.

Moving on

The adoption of mobile-first CSS was a significant development milestone because it allowed front-end developers to concentrate on mobile web applications rather than creating websites for desktop use and attempting to convert them to work on other devices.

I don't think anyone wants to return to that development model again, but it's important we don't lose sight of the issue it highlighted: that things can easily get convoluted and less efficient if we prioritize one particular device—any device—over others. For this reason, it seems natural to concentrate on the CSS in its own right, always mindful of what is the default setting and what constitutes an exception, as a result. I've started to notice subtle simplifications in both the CSS and other developers', and that the work is also a little more organized and effective.

In general, simplifying CSS rule creation whenever we can is ultimately a cleaner approach than going around in circles of overrides. However, whatever method you use, it must fit the project. Mobile-first may turn out to be the best option for the situation at hand or not, but first you need to fully comprehend the trade-offs you're entering.

However, we’re still very far from this best.

At the time, I didn’t realize yet how to functionally combine morality. Yes, I did discover some tools in past projects that had worked for me, such as using checklists, notion monitoring, and “dark fact” sessions, but I wasn’t able to use them in every task. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I made a deeper investigation into the causes of business failure that prevent us from practicing social design every day. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine ethics. And it’s amazingly easy! However, we must first move out to understand what we’re going through.

Control the system

Unfortunately, we are confined to a capitalist system that fosters consumerism and inequality and is obsessed with the utopian dream of infinite development. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Over the past few years, those goals have transformed our well-meaning human-centered attitude into a potent tool that encourages ever-higher levels of consumption. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. Also with our best intentions, and despite the fact that we like to claim that we provide solutions for people, we’re a part of the issue.

What can we do to alter this?

We may begin by acting on the appropriate level of the system. A system intellectual named Donna H. Meadows after outlined ways to influence a system in order of success. When you apply these to architecture, you get:

You can change figures like functionality results or the number of layout critiques at the lowest level of effectiveness. But none of that may change the direction of a business.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• Instead of focusing on feedback loops like control power, employee reputation, or design-system investments, a company can improve its ability to achieve its goals. But that doesn’t alter the goals themselves, which means that the business will also work against your ethical-design ideals.
• The change of moral methods, toolkits, articles, conferences, workshops, and so on is what most ethical-design initiatives are currently focused on at the next level, info flows. This is also where moral style has remained largely theoretical. We’ve been focusing on the wrong level of the system all this day.
• Consider rules, for instance; they consistently surpass information. There can be commonly accepted guidelines, such as how fund works, or a sprint group’s concept of done. However, illegal laws meant to keep income, frequently revealed through comments like” the customer didn’t request for it” or “don’t make it too big” is also smother social style.
• Changing the rules without holding established energy is extremely difficult. That’s why the next stage is thus important: self-organization. Bottom-up initiatives, love projects, self-steering teams, and experiment all contribute to a company’s resilience and creativity. It’s precisely this diversity of viewpoints that’s needed to functionally address major structural issues like materialism, wealth disparity, and climate change.
• But objectives and metrics are even more powerful than self-organization. Our companies want to make more money, which means that everything and everyone in the company does their best to… make the company more money. And once I realized that profit is nothing more than a measurement, I understood how crucial a very specific, defined metric can be toward pushing a company in a certain direction.

What is the takeaway? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

However, we all know that the three dimensions are not equally important: viability is ultimately what determines whether a product will become operational. So a more realistic representation might look like this:

Viability is the aim, while feasibility and desire are the means. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. Therefore, both the company’s goals and its viability are important in order to realize what they are trying to accomplish. It makes intuitive sense: to achieve most anything, you need resources, people, and money. Fun fact: Italian speakers are completely unaware of the distinction between feasibility and viability; both terms are merely fattibilità.

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. When deciding whether a product is safe for people, such as user satisfaction or conversion, durability goals are unimportant. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They are unsuitable for striking a healthy balance with the natural world.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. There are many variations of these models, some calling them “imputability, integrity, or responsibility.” What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There is no one way to accomplish this because it greatly depends on your country’s culture, values, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

pursue equity, sustainability, and well-being.

We created objectives that address design’s effect on three levels: individual, societal, and global.

An objective on a personal level teaches us that success transcends the typical area of user experience and satisfaction, taking into account factors like how much time and effort are required of users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are non-misleading, transparent, non-addictive, and non-misleading. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

We must consider our impact beyond the user, widening our focus to the economy, communities, and other indirect stakeholders, as a result of establishing an objective on the societal level. We called this objective equity:

We create products and services that have a positive social impact. We think of racial justice, racial justice, and the inclusion and diversity of people as teams, users, and customer segments. We listen to local culture, communities, and those we affect.

Finally, the global goal on the global level aims to keep us in harmony with our only true home, humanity. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our solutions promote the circular economy by generating value from waste, reusing products, and giving priority to sustainable choices. We deliver functionality instead of ownership, and we limit energy use.

In essence, ethical design ( to us ) meant achieving the wellbeing of each user and an equitable value distribution within society through a design that can sustain our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

However, defining these goals is still insufficient. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

This overview includes some examples of metrics you can use to measure your progress toward equity, well-being, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. This example was once provided by Donella Meadows:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not lead to national security.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if we instead used metrics for ( digital ) well-being, like ( reduced ) screen time or software energy consumption, to measure success?

There’s another important message here. If we set an objective to create a calm interface, we might still end up with a screen that makes people anxious, even if we set the wrong metric for calmness, such as the number of interface elements. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. When you perform the task of selecting metrics for our goals, you are made to consider what success looks like in terms of words and how you can demonstrate that you have met your ethical goals. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The response to this query is very concise and focused.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. It” simply” becomes a matter of using your imagination and sifting through the knowledge and tools that are already at your disposal.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Would a brief illustration suffice, or should you go with that enticing video? Which typeface is the most calm and inclusive? What brand-new equipment and techniques do you employ? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How can you ensure that those who are impacted by decisions are present when they are made? How can you measure our effects?

The definition of success will fundamentally alter what doing good design entails.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Start it off or return to the pre-existing

The kickoff is the most important meeting that can be so easy to forget to include. There are two main stages to it: 1 ) the alignment of expectations and 2 ) the success definition.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Discussion and assumptions are raised. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For instance, we conducted an online kickoff with the client, a subject-matter expert, and two other designers for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. However, agreeing on the project’s success means expressing expectations just as crucial as expressing expectations in terms of desire, viability, feasibility, and ethics. What are the objectives in each dimension?

It is crucial to reach an understanding of what success means at this early stage because you can rely on it for the duration of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. To create a successful product, we agreed in our first meeting that a diverse user group that includes A and B is necessary. So we do activity X and follow research process Y”. Compare those odds to a situation where the team had to ask for permission halfway through the project and didn’t agree to it in advance. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. It consists of a set of outer rings and an inner ring, which are intended to capture ideas for measuring those objectives. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We explored each dimension and recorded ideas on digital sticky notes. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. Additionally, the subject-matter expert stressed the value of involving students from underprivileged and low-income groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s history and purpose: Why do we work on this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• how will we go about defining the scope, process, and role descriptions?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

How do I begin with ethical design? have a number of coworkers asked me over the past year. My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. There’s no skipping this step if you want to be an ethical, responsible designer.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you think of yourself as a system designer, your first step should be to understand how your industry contributes to consumerism and inequality, how finance drives business, and how to think about how to use the system to exert the most influence. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Gather your coworkers and instead define design goals for well-being, equity, and sustainability. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Give them their opinions, make them known and understandable, ask for their consent, and expect them to follow through with it.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my coworkers had questions to ask, such as” Will they take this seriously”?,” Will they take it seriously?” and “Can’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It seems like a good idea, no? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

That’s not enough, according to systems theory. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t continue to live in the design-for-designers bubble and enjoy our privileged working-from-home environment without access to the real world. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. By challenging them to redefine success in business, we must actively engage with our coworkers and clients.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We simply need to come to terms with the right goals at the start of each design project, identify the appropriate metrics, and acknowledge that we already have everything we need to get started. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.

In today’s data-driven environment, it’s becoming more and more possible for you to be asked to create a personal electronic expertise, whether it’s a common website, consumer portal, or indigenous application. But while there continues to be no lack of marketing buzz around personalization systems, we also have very few defined approaches for implementing personalized UX.

That’s where we begin. After completing tens of personalisation projects over the past few years, we gave ourselves a purpose: could you make a systematic personalization platform especially for UX practitioners? A human-centered personalization program can be established using the Personalization Pyramid, which covers information, classification, content delivery, and overall objectives. By using this strategy, you will be able to understand the core components of a modern, UX-driven personalization system ( or at the very least understand enough to get started ).

Getting Started

We’ll assume that you are already comfortable with the fundamentals of modern personalization for the purposes of this article. A nice guide can be found these: Website Personalization Planning. Although Graphic projects in this field can take a variety of forms, they frequently begin with identical starting points.

Common scenarios for starting a customisation task:

• Your business or client made a purchase to support personalization with a content management system ( CMS ), marketing automation platform ( MAP ), or other related technology.
• The CMO, CDO, or CIO has identified personalisation as a target
• Consumer data is unclear or disjointed.
• You are running some secluded targeting strategies or A/B tests
• On personalization strategy, participants disagree.
• Mandate of customer privacy rules ( e. g. GDPR ) requires revisiting existing user targeting practices

Regardless of where you begin, a powerful personalization system will require the same key building stones. These are the “levels” on the tower, as we’ve made them. Whether you are a UX artist, scholar, or planner, understanding the core components may help make your contribution effective.

From top to bottom, the rates include:

North Star: What larger corporate goal is the personalisation initiative pursuing?
1. Objectives: What are the specific, tangible benefits of the system?
2. Touchpoints: Where will you get a personal knowledge?
3. Contexts and Campaigns: What personalization information does the person view?
4. What constitutes a distinct, suitable audience? User Parts
5. Actionable Data: What dependable and credible information is captured by our professional platform to generate personalization?
6. What wider set of data is conceivable ( now in our environment ) to allow you to optimize?

We’ll go through each of these amounts in change. An associated deck of cards serves as an example of each level’s specific cases to make this more meaningful. We’ve found them helpful in customisation pondering periods, and will include cases for you here.

Starting at the Top

The elements of the pyramids are as follows:

North Star

What overall goal do you have with your personalization software ( big or small ) is a northern star. The North Star defines the (one ) overall mission of the personalization program. What are your goals, exactly? North Stars cast a ghost. The darkness is bigger the sun the bigger the sun. Example of North Starts may include:

Function: Optimize based on fundamental customer inputs. Examples:” Raw” messages, basic search effects, system user settings and settings options, general flexibility, basic improvements
1. Feature: Self-contained customisation component. Examples:” Cooked” notifications, advanced optimizations ( geolocation ), basic dynamic messaging, customized modules, automations, recommenders
2. User experience: Personal consumer experiences across various user flows and interactions. Examples: Email campaigns, landing pages, advanced messaging ( i. e. C2C chat ) or conversational interfaces, larger user flows and content-intensive optimizations ( localization ).
3. Solution: Highly distinctive, personalized solution experiences. Example: Standalone, branded encounters with personalization at their base, like the “algotorial” songs by Spotify quite as Discover Weekly.

Goals

Personalization can help speed up designing with user intentions, as in any great UX design. Goals are the military and tangible metrics that may prove the entire program is effective. Start with your existing analytics and measurement system, as well as metrics that you can benchmark against. In some cases, new targets may be ideal. The most important thing to consider is that personalisation is more of a means of achieving an objective than a desired result. Common targets include:

• Conversion
• Time spent on work
• Net promoter score ( NPS)
• Consumer pleasure

Touchpoints

Touchpoints are where the personalisation happens. This will be one of your biggest areas of responsibility as a UX custom. The connections available to you will depend on how your personalization and associated technology features are instrumented, and should be rooted in improving a person’s experience at a certain point in the trip. Touchpoints can be multi-device ( mobile, in-store, website ), but they can also be more specific ( web banner, web pop-up, etc. ). Here are a few illustrations:

Channel-level Points

• Email: Role
• Contact opens at what time?
• In-store display ( JSON endpoint )
• Native game
• Search

Wireframe-level Touchpoints

• Web overlay
• Web call club
• Web symbol
• Web content stop
• Menu on the web

If you’re designing for web interface, for instance, you will likely need to include personal “zones” in your wireframes. Based on our next action, context, and campaigns, the articles for these can be presented dynamically in touchpoints.

Contexts and Campaigns

Once you’ve identified some touchpoints, you can decide what kind of customized content a user will get. Many personalization tools will refer to these as” campaigns” ( so, for example, a campaign on a web banner for new visitors to the website ). These will be displayed automatically to specific customer segments at specific touchpoints, as defined by user data. At this stage, we find it helpful to consider two distinct models: a framework design and a willing design. The context helps you consider whether a user is engaging with the personalization process at the moment, such as when they are simply browsing the web or engaging in a deep dive. Think of it in terms of information retrieval behaviors. The content model can then guide you in deciding what kind of personalization to use in the context ( for instance, an” Enrich” campaign that features related articles might be a good substitute for extant content ).

Personalization Context Model:

1. Browse
2. Skim
3. Nudge
4. Feast

Personalization Content Model

1. Alert
2. Make Easier
3. Cross-Sell
4. Enrich

We’ve written a lot more in depth about each of these models elsewhere, so be sure to check out Colin’s Personalization Content Model and Jeff’s Personalization Context Model.

User Groups

User segments can be created prescriptively or adaptively, based on user research ( e. g. via rules and logic tied to set user behaviors or via A/B testing ). You will need to consider how to treat the logged-in visitor, the guest or returning visitor, for whom you may have a stateful cookie ( or another post-cookie identifier ), or the authenticated visitor at the least. Here are some examples from the personalization pyramid:

• Unknown
• Guest
• Authenticated
• Default
• Referred
• Role
• Cohort
• Unique Identification Number

Actionable Data

Every organization with any digital presence has data. It’s a matter of examining what user data you can ethically collect, its inherent reliability and value, and how you can use it ( sometimes referred to as “data activation” ). Fortunately, the tide is turning to first-party data: a recent study by Twilio estimates some 80 % of businesses are using at least some type of first-party data to personalize the customer experience.

First-party data has a number of benefits for the user experience, including being relatively simple to collect, more likely to be accurate, and less susceptible to the” creep factor” of third-party data. So a key part of your UX strategy should be to determine what the best form of data collection is on your audiences. Here are a few illustrations:

There is a progression of profiling when it comes to recognizing and making decisioning about different audiences and their signals. As user data volume and time and confidence increase, it varies more granularly to more precise constructs about ever-smaller cohorts of users.

While some combination of implicit / explicit data is generally a prerequisite for any implementation ( more commonly referred to as first party and third-party data ) ML efforts are typically not cost-effective directly out of the box. This is because optimization requires a strong data backbone and content repository. But these approaches should be considered as part of the larger roadmap and may indeed help accelerate the organization’s overall progress. At this point, you will typically work with key stakeholders and product owners to create a profiling model. The profiling model includes defining approach to configuring profiles, profile keys, profile cards and pattern cards. A multi-faceted method of profiling that is adaptable.

Pulling it Together

The cards serve as the foundation for an inventory of sorts ( we provide blanks for you to tailor your own ), a set of potential levers and motivations for the kind of personalization activities you aspire to deliver, but they are more valuable when grouped together.

In assembling a card “hand”, one can begin to trace the entire trajectory from leadership focus down through a strategic and tactical execution. It is also at the heart of the way that both co-authors have organized workshops to build a backlog of programs, which would make a good subject for a separate article.

In the meantime, what is important to note is that each colored class of card is helpful to survey in understanding the range of choices potentially at your disposal, it is threading through and making concrete decisions about for whom this decisioning will be made: where, when, and how.

Lay Down Your Cards

Any effective personalization strategy must take into account near, middle, and long-term objectives. Even with the leading CMS platforms like Sitecore and Adobe or the most exciting composable CMS DXP out there, there is simply no “easy button” wherein a personalization program can be stood up and immediately view meaningful results. Having said that, all personalization activities follow a common grammar, similar to how every sentence contains nouns and verbs. These cards attempt to map that territory.

The personalization space is true, between the dream of getting it right and the worry of it going wrong ( like when we encounter “persofails” similar to a company’s constant plea to regular people to purchase additional bathroom seats ). It’s an particularly confusing place to be a modern professional without a map, a map, or a strategy.

There are no Lonely Planet and some tour guides for those of you who want to personalize because successful personalization depends so much on each group’s talent, technology, and market position.

But you can ensure that your group has packed its carriers reasonably.

There’s a DIY method to increase your chances for achievement. You’ll at least at least disarm your boss ‘ irrational exuberance. Before the group you’ll need to properly plan.

We refer to it as prepersonalization.

Behind the song

Take into account Spotify’s DJ feature, which was introduced last month.

We’re used to seeing the polished final outcome of a personalization have. A personal have had to be developed, budgeted, and given priority before the year-end prize, the making-of-backstory, or the behind-the-scenes success chest. Before any customisation have goes live in your product or service, it lives amid a delay of valuable ideas for expressing consumer experiences more automatically.

So how do you decide where to position your customisation wagers? How do you design regular interactions that hasn’t journey up users or—worse—breed mistrust? We’ve discovered that several budgeted programs initially needed one or more workshops to join key stakeholders and domestic customers of the technology to justify their continuing investments. Create it count.

We’ve closely monitored the same evolution with our consumers, from major software to young companies. In our experience with working on small and large personalization work, a program’s best monitor record—and its capacity to weather tough questions, work steadily toward shared answers, and manage its design and engineering efforts—turns on how successfully these prepersonalization activities play out.

Effective workshops consistently separate successful future endeavors from unsuccessful ones, saving countless hours of time, resources, and overall well-being.

A personalization practice involves a multiyear effort of testing and feature development. It’s not a tech stack switch-flip. It’s best managed as a backlog that often evolves through three steps:

1. customer experience optimization ( CXO, also known as A/B testing or experimentation )
2. always-on automations ( whether rules-based or machine-generated )
3. mature features or standalone product development ( such as Spotify’s DJ experience )

This is why we created our progressive personalization framework and why we’re field-testing an accompanying deck of cards: we believe that there’s a base grammar, a set of “nouns and verbs” that your organization can use to design experiences that are customized, personalized, or automated. These cards won’t be necessary for you. But we strongly recommend that you create something similar, whether that might be digital or physical.

Set the timer for your kitchen.

How long does it take to cook up a prepersonalization workshop? The evaluation activities that we suggest include can last for a number of weeks ( and frequently do ). For the core workshop, we recommend aiming for two to three days. Here are a summary of our broad approach and information on the most crucial first-day activities.

The full arc of the wider workshop is threefold:

Kickstart: This specifies the terms of your engagement as you concentrate on both your team’s and your team’s readiness and drive.
1. Plan your work: This is the heart of the card-based workshop activities where you specify a plan of attack and the scope of work.
2. Work your plan: This stage consists of making it possible for team members to individually pitch their own pilots that each include a proof-of-concept project, business case, and operating model.

Give yourself at least a day, split into two large time blocks, to power through a concentrated version of those first two phases.

Kickstart: Apt your appetite

We call the first lesson the “landscape of connected experience“. It looks at the possibilities for personalization in your organization. A connected experience, in our parlance, is any UX requiring the orchestration of multiple systems of record on the backend. A marketing-automation platform and a content-management system could be used together. It could be a digital-asset manager combined with a customer-data platform.

Create a conversation by mentioning consumer and business-to-business examples of connected experience interactions that you admire, find familiar, or even dislike. This should cover a representative range of personalization patterns, including automated app-based interactions ( such as onboarding sequences or wizards ), notifications, and recommenders. We have a list of these in the cards. Here’s a list of 142 different interactions to jog your thinking.

It’s all about setting the tone. What are the possible paths for the practice in your organization? Here’s a long-form primer and a strategic framework for a broader perspective.

Assess each example that you discuss for its complexity and the level of effort that you estimate that it would take for your team to deliver that feature ( or something similar ). In our cards, we break down connected experiences into five categories: functions, features, experiences, complete products, and portfolios. Size your own build here. This will help to draw attention to both the benefits of ongoing investment and the difference between what you currently offer and what you intend to deliver in the future.

Next, have your team plot each idea on the following 2×2 grid, which lays out the four enduring arguments for a personalized experience. This is crucial because it emphasizes how personalization can affect your own methods of working as well as your external customers. It’s also a reminder ( which is why we used the word argument earlier ) of the broader effort beyond these tactical interventions.

Each team member should decide where they would like to place your company’s emphasis on your product or service. Naturally, you can’t prioritize all of them. Here, the goal is to show how various departments may view their own benefits from the effort, which can vary from one department to the next. Documenting your desired outcomes lets you know how the team internally aligns across representatives from different departments or functional areas.

The third and final kickstart activity is about filling in the personalization gap. Is your customer journey well documented? Will compliance with data and privacy be a significant challenge? Do you have content metadata needs that you have to address? ( We’re pretty sure you do; it’s just a matter of acknowledging the magnitude of that need and finding a solution. ) In our cards, we’ve noted a number of program risks, including common team dispositions. For instance, our Detractor card lists six intractable behaviors that prevent progress.

Effectively collaborating and managing expectations is critical to your success. Consider the potential obstacles to your advancement in the future. Press the participants to name specific steps to overcome or mitigate those barriers in your organization. According to research, personalization initiatives face a number of common obstacles.

At this point, you’ve hopefully discussed sample interactions, emphasized a key area of benefit, and flagged key gaps? Good, you’re all set to go on.

Hit that test kitchen

Next, let’s take a look at what you’ll need to create personalization recipes. Personalization engines, which are robust software suites for automating and expressing dynamic content, can intimidate new customers. They give you a variety of options for how your organization can conduct its activities because of their broad and potent capabilities. This presents the question: Where do you begin when you’re configuring a connected experience?

What’s crucial here is to avoid treating the installed software like a dream kitchen from some imaginary remodeling project ( as one of our client executives memorably put it ). These software engines are more like test kitchens where your team can begin devising, tasting, and refining the snacks and meals that will become a part of your personalization program’s regularly evolving menu.

Over the course of the workshop, the ultimate menu of the prioritized backlog will come together. And creating “dishes” is the way that you’ll have individual team stakeholders construct personalized interactions that serve their needs or the needs of others.

The dishes will be made from recipes, which have predetermined ingredients.

Verify your ingredients

Like a good product manager, you’ll make sure you have everything ready to cook up your desired interaction ( or figure out what needs to be added to your pantry ) and that you validate with the right stakeholders present. These ingredients include the audience that you’re targeting, content and design elements, the context for the interaction, and your measure for how it’ll come together.

This is not just about identifying needs. Documenting your personalizations as a series of if-then statements lets the team:

1. compare findings to a unified approach for developing features, similar to how artists paint with the same color palette,
2. specify a consistent set of interactions that users find uniform or familiar,
3. and establish parity between all important performance indicators and performance metrics.

This helps you streamline your designs and your technical efforts while you deliver a shared palette of core motifs of your personalized or automated experience.

Create a recipe.

What ingredients are important to you? Consider the construct “what-what-when-why”

• Who are your key audience segments or groups?
• What content, what design elements, and under what circumstances will you give them?
• And for which business and user benefits?

Five years ago, we developed these cards and card categories for the first time. We regularly play-test their fit with conference audiences and clients. And there are still fresh possibilities. But they all follow an underlying who-what-when-why logic.

In the cards in the accompanying photo below, you can typically follow along with right to left in three examples of subscription-based reading apps.

1. Nurture personalization: When a guest or an unknown visitor interacts with a product title, a banner or alert bar appears that makes it easier for them to encounter a related title they may want to read, saving them time.
2. Welcome automation: An email is sent when a new user registers to highlight the breadth of the content catalog and convert them to happy subscribers.
3. Winback automation: Before their subscription lapses or after a recent failed renewal, a user is sent an email that gives them a promotional offer to suggest that they reconsider renewing or to remind them to renew.

We’ve also found that cocreating the recipes themselves can sometimes be the most effective way to start brainstorming about what these cards might be for your organization. Start with a set of blank cards, and begin labeling and grouping them through the design process, eventually distilling them to a refined subset of highly useful candidate cards.

The later stages of the workshop could be characterized as moving from focusing on a cookbook to a more nuanced customer-journey mapping. Individual” cooks” will pitch their recipes to the team, using a common jobs-to-be-done format so that measurability and results are baked in, and from there, the resulting collection will be prioritized for finished design and delivery to production.

Better architecture is necessary for better kitchens.

Simplifying a customer experience is a complicated effort for those who are inside delivering it. Beware of anyone who contradicts your advice. With that being said,” Complicated problems can be hard to solve, but they are addressable with rules and recipes“.

A team overfitting: they aren’t designing with their best data, is what causes personalization to become a laugh line. Like a sparse pantry, every organization has metadata debt to go along with its technical debt, and this creates a drag on personalization effectiveness. For instance, your AI’s output quality is in fact impacted by your IA. Spotify’s poster-child prowess today was unfathomable before they acquired a seemingly modest metadata startup that now powers its underlying information architecture.

You can withstand the heat without a doubt.

Personalization technology opens a doorway into a confounding ocean of possible designs. Only a disciplined and highly collaborative approach can achieve the necessary concentration and intention. So banish the dream kitchen. Instead, head to the test kitchen to save time, preserve job security, and avoid imagining the creative concepts that come from the doers in your organization. There are meals to serve and mouths to feed.

This organizational framework gives you a fighting chance at long-term success as well as solid ground. Wiring up your information layer isn’t an overnight affair. However, if you use the same cookbook and the same recipes, you’ll have solid ground for success. We designed these activities to make your organization’s needs concrete and clear, long before the hazards pile up.

Your time well spent is being able to assess your unique situation and digital skills, despite the associated costs associated with investing in this kind of technology and product design. Don’t squander it. The pudding is the proof, as they say.

I offer a single bit of advice to friends and family when they become new parents: When you start to think that you’ve got everything figured out, everything will change. Just as you start to get the hang of feedings, diapers, and regular naps, it’s time for solid food, potty training, and overnight sleeping. When you figure those out, it’s time for preschool and rare naps. The cycle goes on and on.

The same applies for those of us working in design and development these days. Having worked on the web for almost three decades at this point, I’ve seen the regular wax and wane of ideas, techniques, and technologies. Each time that we as developers and designers get into a regular rhythm, some new idea or technology comes along to shake things up and remake our world.

How we got here

I built my first website in the mid-’90s. Design and development on the web back then was a free-for-all, with few established norms. For any layout aside from a single column, we used table elements, often with empty cells containing a single pixel spacer GIF to add empty space. We styled text with numerous font tags, nesting the tags every time we wanted to vary the font style. And we had only three or four typefaces to choose from: Arial, Courier, or Times New Roman. When Verdana and Georgia came out in 1996, we rejoiced because our options had nearly doubled. The only safe colors to choose from were the 216 “web safe” colors known to work across platforms. The few interactive elements (like contact forms, guest books, and counters) were mostly powered by CGI scripts (predominantly written in Perl at the time). Achieving any kind of unique look involved a pile of hacks all the way down. Interaction was often limited to specific pages in a site.

The birth of web standards

At the turn of the century, a new cycle started. Crufty code littered with table layouts and font tags waned, and a push for web standards waxed. Newer technologies like CSS got more widespread adoption by browsers makers, developers, and designers. This shift toward standards didn’t happen accidentally or overnight. It took active engagement between the W3C and browser vendors and heavy evangelism from folks like the Web Standards Project to build standards. A List Apart and books like Designing with Web Standards by Jeffrey Zeldman played key roles in teaching developers and designers why standards are important, how to implement them, and how to sell them to their organizations. And approaches like progressive enhancement introduced the idea that content should be available for all browsers—with additional enhancements available for more advanced browsers. Meanwhile, sites like the CSS Zen Garden showcased just how powerful and versatile CSS can be when combined with a solid semantic HTML structure.

Server-side languages like PHP, Java, and .NET overtook Perl as the predominant back-end processors, and the cgi-bin was tossed in the trash bin. With these better server-side tools came the first era of web applications, starting with content-management systems (particularly in the blogging space with tools like Blogger, Grey Matter, Movable Type, and WordPress). In the mid-2000s, AJAX opened doors for asynchronous interaction between the front end and back end. Suddenly, pages could update their content without needing to reload. A crop of JavaScript frameworks like Prototype, YUI, and jQuery arose to help developers build more reliable client-side interaction across browsers that had wildly varying levels of standards support. Techniques like image replacement let crafty designers and developers display fonts of their choosing. And technologies like Flash made it possible to add animations, games, and even more interactivity.

These new technologies, standards, and techniques reinvigorated the industry in many ways. Web design flourished as designers and developers explored more diverse styles and layouts. But we still relied on tons of hacks. Early CSS was a huge improvement over table-based layouts when it came to basic layout and text styling, but its limitations at the time meant that designers and developers still relied heavily on images for complex shapes (such as rounded or angled corners) and tiled backgrounds for the appearance of full-length columns (among other hacks). Complicated layouts required all manner of nested floats or absolute positioning (or both). Flash and image replacement for custom fonts was a great start toward varying the typefaces from the big five, but both hacks introduced accessibility and performance problems. And JavaScript libraries made it easy for anyone to add a dash of interaction to pages, although at the cost of doubling or even quadrupling the download size of simple websites.

The web as software platform

The symbiosis between the front end and back end continued to improve, and that led to the current era of modern web applications. Between expanded server-side programming languages (which kept growing to include Ruby, Python, Go, and others) and newer front-end tools like React, Vue, and Angular, we could build fully capable software on the web. Alongside these tools came others, including collaborative version control, build automation, and shared package libraries. What was once primarily an environment for linked documents became a realm of infinite possibilities.

At the same time, mobile devices became more capable, and they gave us internet access in our pockets. Mobile apps and responsive design opened up opportunities for new interactions anywhere and any time.

This combination of capable mobile devices and powerful development tools contributed to the waxing of social media and other centralized tools for people to connect and consume. As it became easier and more common to connect with others directly on Twitter, Facebook, and even Slack, the desire for hosted personal sites waned. Social media offered connections on a global scale, with both the good and bad that that entails.

Want a much more extensive history of how we got here, with some other takes on ways that we can improve? Jeremy Keith wrote “Of Time and the Web.” Or check out the “Web Design History Timeline” at the Web Design Museum. Neal Agarwal also has a fun tour through “Internet Artifacts.”

Where we are now

In the last couple of years, it’s felt like we’ve begun to reach another major inflection point. As social-media platforms fracture and wane, there’s been a growing interest in owning our own content again. There are many different ways to make a website, from the tried-and-true classic of hosting plain HTML files to static site generators to content management systems of all flavors. The fracturing of social media also comes with a cost: we lose crucial infrastructure for discovery and connection. Webmentions, RSS, ActivityPub, and other tools of the IndieWeb can help with this, but they’re still relatively underimplemented and hard to use for the less nerdy. We can build amazing personal websites and add to them regularly, but without discovery and connection, it can sometimes feel like we may as well be shouting into the void.

Browser support for CSS, JavaScript, and other standards like web components has accelerated, especially through efforts like Interop. New technologies gain support across the board in a fraction of the time that they used to. I often learn about a new feature and check its browser support only to find that its coverage is already above 80 percent. Nowadays, the barrier to using newer techniques often isn’t browser support but simply the limits of how quickly designers and developers can learn what’s available and how to adopt it.

Today, with a few commands and a couple of lines of code, we can prototype almost any idea. All the tools that we now have available make it easier than ever to start something new. But the upfront cost that these frameworks may save in initial delivery eventually comes due as upgrading and maintaining them becomes a part of our technical debt.

If we rely on third-party frameworks, adopting new standards can sometimes take longer since we may have to wait for those frameworks to adopt those standards. These frameworks—which used to let us adopt new techniques sooner—have now become hindrances instead. These same frameworks often come with performance costs too, forcing users to wait for scripts to load before they can read or interact with pages. And when scripts fail (whether through poor code, network issues, or other environmental factors), there’s often no alternative, leaving users with blank or broken pages.

Where do we go from here?

Today’s hacks help to shape tomorrow’s standards. And there’s nothing inherently wrong with embracing hacks—for now—to move the present forward. Problems only arise when we’re unwilling to admit that they’re hacks or we hesitate to replace them. So what can we do to create the future we want for the web?

Build for the long haul. Optimize for performance, for accessibility, and for the user. Weigh the costs of those developer-friendly tools. They may make your job a little easier today, but how do they affect everything else? What’s the cost to users? To future developers? To standards adoption? Sometimes the convenience may be worth it. Sometimes it’s just a hack that you’ve grown accustomed to. And sometimes it’s holding you back from even better options.

Start from standards. Standards continue to evolve over time, but browsers have done a remarkably good job of continuing to support older standards. The same isn’t always true of third-party frameworks. Sites built with even the hackiest of HTML from the ’90s still work just fine today. The same can’t always be said of sites built with frameworks even after just a couple years.

Design with care. Whether your craft is code, pixels, or processes, consider the impacts of each decision. The convenience of many a modern tool comes at the cost of not always understanding the underlying decisions that have led to its design and not always considering the impact that those decisions can have. Rather than rushing headlong to “move fast and break things,” use the time saved by modern tools to consider more carefully and design with deliberation.

Always be learning. If you’re always learning, you’re also growing. Sometimes it may be hard to pinpoint what’s worth learning and what’s just today’s hack. You might end up focusing on something that won’t matter next year, even if you were to focus solely on learning standards. (Remember XHTML?) But constant learning opens up new connections in your brain, and the hacks that you learn one day may help to inform different experiments another day.

Play, experiment, and be weird! This web that we’ve built is the ultimate experiment. It’s the single largest human endeavor in history, and yet each of us can create our own pocket within it. Be courageous and try new things. Build a playground for ideas. Make goofy experiments in your own mad science lab. Start your own small business. There has never been a more empowering place to be creative, take risks, and explore what we’re capable of.

Share and amplify. As you experiment, play, and learn, share what’s worked for you. Write on your own website, post on whichever social media site you prefer, or shout it from a TikTok. Write something for A List Apart! But take the time to amplify others too: find new voices, learn from them, and share what they’ve taught you.

Go forth and make

As designers and developers for the web (and beyond), we’re responsible for building the future every day, whether that may take the shape of personal websites, social media tools used by billions, or anything in between. Let’s imbue our values into the things that we create, and let’s make the web a better place for everyone. Create that thing that only you are uniquely qualified to make. Then share it, make it better, make it again, or make something new. Learn. Make. Share. Grow. Rinse and repeat. Every time you think that you’ve mastered the web, everything will change.

I’d like you to consider this a “yes … and” piece to complement Joe’s post. I’m no trying to reject any of what he’s saying, but rather to give some context to initiatives and opportunities where AI may produce real, positive impacts on people with disabilities. To be clear, I want to take some time to talk about what’s possible in hope that we’ll find it one day. There are, and we’ve needed to address them, like, yesterday.

Other words

Joe’s article spends a lot of time examining how computer vision models can create other word. He raises a lot of appropriate points regarding the state of the world right now. And while computer-vision concepts continue to improve in the quality and complexity of information in their information, their benefits aren’t wonderful. He argues to be accurate that the state of image research is currently very poor, especially for some graphic types, in large part due to the absence of contextual contexts in which to look at images ( as a result of having separate “foundation” models for words analysis and image analysis ). Today’s models aren’t trained to distinguish between images that are contextually relevant ( should probably have descriptions ) and those that are purely decorative ( couldn’t possibly need a description ) either. However, I still think there’s possible in this area.

As Joe points out, human-in-the-loop publishing of ctrl text should definitely be a factor. And if AI can intervene and provide a starting point for alt text, even if the quick reads,” What is this BS?” That’s not correct at all … Let me try to offer a starting point— I think that’s a win.

If we can specifically teach a design to consider image usage in context, it might be able to help us more swiftly distinguish between images that are likely to be beautiful and those that are more descriptive. That will help clarify which situations require image descriptions, and it will increase authors ‘ effectiveness in making their sites more visible.

While complex images—like graphs and charts—are challenging to describe in any sort of succinct way ( even for humans ), the image example shared in the GPT4 announcement points to an interesting opportunity as well. Let’s say you came across a map that was simply the name of the table and the type of visualization it was: Pie table comparing smartphone use to have phone use among US households making under$ 30, 000 annually. ( That would be a pretty bad alt text for a chart because it would frequently leave many unanswered questions about the data, but let’s just assume that that was the description in place. ) If your website knew that that picture was a pie graph ( because an ship model concluded this ), imagine a world where people could ask questions like these about the creative:

• Are there more smartphone users than feature phones?
• How many more?
• Is there a group of people that don’t fall into either of these buckets?
• What number is that?

For a moment, the chance to learn more about images and data in this way could be revolutionary for people who are blind and low vision as well as for those with various forms of color blindness, cognitive disabilities, and other issues. Putting aside the realities of large language model ( LLM) hallucinations, where a model just makes up plausible-sounding “facts,” It could also be useful in educational contexts to help people who can see these charts, as is, to understand the data in the charts.

What if you could ask your browser to make a complicated chart simpler? What if you demanded that the line graph be isolated into just one line? What if you could ask your browser to transpose the colors of the different lines to work better for form of color blindness you have? What if you asked it to switch colors in favor of patterns? That seems like a possibility given the chat-based interfaces and our current ability to manipulate images in modern AI tools.

Now imagine a purpose-built model that could extract the information from that chart and convert it to another format. Perhaps it could convert that pie chart (or, better yet, a series of pie charts ) into more usable ( and useful ) formats, like spreadsheets, for instance. That would be incredible!

Matching algorithms

When Safiya Umoja Noble chose to put her book Algorithms of Oppression, she hit the nail on the head. Although her book focused on the ways that search engines can foster racism, I believe it to be equally accurate to say that all computer models have the potential to amplify conflict, bias, and intolerance. Whether it’s Twitter always showing you the latest tweet from a bored billionaire, YouTube sending us into a Q-hole, or Instagram warping our ideas of what natural bodies look like, we know that poorly authored and maintained algorithms are incredibly harmful. A large portion of this is attributable to the lack of diversity in those who create and shape them. However, when these platforms are built with inclusive features in mind, there is real potential for algorithm development to help people with disabilities.

Take Mentra, for example. They serve as a network of employment for people who are neurodivers. They employ an algorithm to match job seekers with potential employers based on more than 75 data points. On the job-seeker side of things, it considers each candidate’s strengths, their necessary and preferred workplace accommodations, environmental sensitivities, and so on. On the employer side, it takes into account each work environment, communication strategies for each job, and other factors. Mentra made the decision to change the script when it came to traditional employment websites because it was run by neurodivergent people. They use their algorithm to propose available candidates to companies, who can then connect with job seekers that they are interested in, reducing the emotional and physical labor on the job-seeker side of things.

More people with disabilities can be used to create algorithms, which can lessen the likelihood that they will harm their communities. Diverse teams are crucial because of this.

Imagine that a social media company’s recommendation engine was tuned to analyze who you’re following and if it was tuned to prioritize follow recommendations for people who talked about similar things but who were different in some key ways from your existing sphere of influence. For instance, if you followed a group of nondisabled white male academics who spoke about AI, it might be advisable to follow those who are disabled, aren’t white, or aren’t men who also speak about AI. If you followed its recommendations, you might learn more about what’s happening in the AI field. These same systems should also use their understanding of biases about particular communities—including, for instance, the disability community—to make sure that they aren’t recommending any of their users follow accounts that perpetuate biases against (or, worse, spewing hate toward ) those groups.

Other ways that AI can assist people with disabilities

I’m sure I could go on and on about using AI to assist people with disabilities, but I’m going to make this last section into a bit of a lightning round if I weren’t trying to put this together in between other tasks. In no particular order:

Voice preservation You might have heard about the voice-preserve offerings from Microsoft, Acapela, or others, or have seen the VALL-E paper or Apple’s Global Accessibility Awareness Day announcement. It’s possible to train an AI model to replicate your voice, which can be a tremendous boon for people who have ALS ( Lou Gehrig’s disease ) or motor-neuron disease or other medical conditions that can lead to an inability to talk. This technology can also be used to create audio deepfakes, so it’s something we need to approach responsibly, but the technology has truly transformative potential.
• voice recognition is. Researchers like those in the Speech Accessibility Project are paying people with disabilities for their help in collecting recordings of people with atypical speech. As I type, they are actively recruiting people with Parkinson’s and related conditions, and they intend to expand this to other conditions as the project develops. More people with disabilities will be able to use voice assistants, dictation software, and voice-response services, as well as to use only their voices to control computers and other devices, according to this research.
• Text transformation. The most recent generation of LLMs is quite capable of changing existing text without giving off hallucinations. This is incredibly empowering for those who have cognitive disabilities and who may benefit from text summaries, simplified versions, or even text that has been prepared for Bionic Reading.

The importance of diverse teams and data

We must acknowledge that our differences matter. The intersections of the identities that we exist in have an impact on our lived experiences. These lived experiences—with all their complexities ( and joys and pain ) —are valuable inputs to the software, services, and societies that we shape. Our differences must be reflected in the data we use to develop new models, and those who provide that valuable information must be compensated for doing so. More robust models are produced by inclusive data sets, which promote more justifiable outcomes.

Want a model that doesn’t demean or patronize or objectify people with disabilities? Make sure that you include information about disabilities that is written by people who have a range of disabilities and that is well represented in the training data.

Want a model that doesn’t speak in ableist language? You may be able to use existing data sets to build a filter that can intercept and remediate ableist language before it reaches readers. Despite this, AI models won’t be replacing human copy editors anytime soon when it comes to sensitivity reading.

Want a copilot for coding that provides recomprehensible recommendations after the jump? Train it on code that you know to be accessible.

I have no doubt that AI has the potential to harm people today, tomorrow, and long into the future. However, I think we should also acknowledge this and make thoughtful, thoughtful, and intentional changes to our approaches to AI that will also reduce harm over time with an emphasis on accessibility ( and, in general, inclusion ). Today, tomorrow, and well into the future.

Thanks to Kartik Sawhney for assisting me with writing this article, Ashley Bischoff for her invaluable editorial assistance, and of course Joe Dolson for the prompt.

I have a creative side. Alchemy is what I do. It is a secret. I don’t perform it as much as I let it be done by me.

I have a creative side. Certainly all creative people approve of this brand. Not all people see themselves in this manner. Some innovative individuals incorporate technology into their work. I honor their assertion, which is true. Perhaps I even have a small fear for them. However, my staying and approach are different.

It distracts one to apologize and qualify in progress. That’s what my head does to destroy me. I’ll leave it alone for today. I may come back later to make amends and count. After I’ve said what I should have. which is sufficient.

Except when it flows like a wine valley and is simple.

Sometimes it does. Maybe what I need to make arrives right away. I’ve learned to avoid saying it right away because they think you don’t work hard enough when you realize that sometimes the thought just comes along and it is the best plan and you know it is the best idea.

Sometimes I just work until the plan strikes me. Maybe it arrives right away, but I don’t remind people for three weeks. Sometimes I blurt out the plan so quickly that I didn’t stop myself. like a child who discovered a reward in a box of Cracker Jacks. I occasionally manage to escape this. Yes, that is the best plan, per some observers. The majority of the time, they don’t, and I regret that passion has faded.

Passion should only be saved for the meet, when it will matter. Certainly the informal get-together that comes before that meeting with two more discussions. Nothing understands why we hold these gatherings. We keep saying we’re going to get rid of them, but we just keep trying to find different ways to get them. They occasionally also are good. Sometimes they detract from the real work, though. Depending on what you do and where you do it, the ratio between when conferences are valuable and when they are a sad distraction vary. And who you are and how you go about doing it. I’ll go over it once more. I have a creative side. That is the style.

Often, a lot of diligent and persistent work ends up with something that is rarely useful. Often I have to accept that and move on to the next task.

Don’t inquire about the procedure. I have a creative side.

I have a creative side. My ambitions are not in my power. And I have no power over my best tips.

I can chisel aside, surround myself with information or photos, and occasionally that works. I can go for a move, which occasionally works. There is no connection between sizzling fuel and bubbling pots, and I may be making dinner. I frequently have a sense of direction when I awaken. The idea that may have saved me disappears almost as frequently as I become aware and a part of the world once more as a senseless wind of oblivion. For imagination, in my opinion, comes from that other planet. The one that we enter in goals, and possibly before and after death. But writers should be asking this, and I am not one of them. I have a creative side. And it’s for philosophers to build massive soldiers in their imaginative world that they claim to be true. But that is yet another diversion. And one that is miserable. Whether or not I am innovative or not, this may be on a much larger issue. But that’s not how I came around, though.

Often the outcome is mitigation. And suffering. You are familiar with the adage” the tortured designer”? Even when the artist is trying to write a soft drink song, a call in a worn-out comedy, or a budget ask, that word is correct.

Some individuals who detest the idea of being called artistic perhaps been closeted artists, but that’s between them and their gods. No act here. Yours is also real. My needs are own, though.

Artists acknowledge their work.

Disadvantages are aware of cons, just like queers are aware of queers, just like real rappers are aware of actual rappers are aware of cons. People have a lot of regard for designers. We respect, follow, and almost deify the excellent ones. Of course, deifying any person is a dreadful error. We’ve been given a warning. We are more knowledgeable. We are aware that people are really people. They argue, they are depressed, they regret their most critical decisions, they are weak and hungry, they can be violent, and they can be as ridiculous as we can if, like us, they are clay. But. But. However, they produce something incredible. They give birth to something that may not exist before them and couldn’t exist without. They are the inspirations ‘ parents. And I suppose I should add that they are the mother of technology because it’s just lying it. Ba ho backside! Okay, that’s all said and done. Continue.

Creatives denigrate our personal small accomplishments because they are compared to those of the great people. Wonderful graphics I‘m not Miyazaki, though. That is glory right then. That is glory directly from God’s heart. This meagre much creation that I made? It essentially fell off the back of the pumpkin truck. And the carrots weren’t actually new.

Artists is aware that they are at best Some. That is what Mozart’s creatives do, also.

I have a creative side. In my hallucinations, my former innovative managers are the ones who judge me because I haven’t worked in advertising in 30 times. They are correct to do that. When it really counts, my brain goes flat because I am too lazy and simplistic. There is no treatment for artistic mania.

I have a creative side. Every experience I create has the potential to make Indiana Jones look older while snoring in a deck head. The more I pursue creativity, the faster I can finish my work, and the longer I brood and circle and gaze aimlessly before I can finish that work.

I can move ten times more quickly than those who aren’t creative, those who have simply been creative for a short while, and those who have just been creative for a short time in their careers. Only that I work twice as quickly as they do, putting the work away, just before I do it, When I put my mind to it, I am so confident in my ability to do a fantastic career. I have an addiction to the delay jump. I’m still so frightened of jumping.

I don’t create art.

I have a creative side. hardly a musician. Though as a boy, I had a dream that I would one day become that. Some of us criticize our abilities and like our own accomplishments because we are not Michelangelos and Warhols. At least we aren’t in elections, which is narcissism.

I have a creative side. Despite my belief in reason and science, my decisions are based on my own senses. and survive in the aftermath of both the triumphs and disasters.

I have a creative side. Every word I’ve said these may irritate another artists who see things differently. Ask a question to two designers, and you’ll find three responses. No matter how we perhaps think about it, our debate, our passion for it, and our responsibility to our own truth, at least in my opinion, are the best indications that we are artists.

I have a creative side. I lament my lack of taste in the areas of human knowledge that I know quite little, that is to say about everything. And I put my ego before everything else in the areas that are most important to me, or perhaps more precisely, to my obsessions. Without my passions, I had probably have to spend time staring living in the eye, which almost none of us can do for very long. No seriously. Actually, no. Because a lot of career is intolerable if you really look at it.

I have a creative side. I think that when I am gone, some of the good parts of me will stay in the head of at least one additional person, just like a family does.

Working frees me from worrying about my job.

I have a creative side. I fear that my little product will disappear.

I have a creative side. I’m too busy making the next thing to devote too much time to it, especially since practically everything I create did achieve the level of success I conceive of.

I have a creative side. I think there is the greatest secret in the process. I think so strongly that I am actually foolish enough to post an essay I wrote into a tiny machine without having to go through or edit it. I swear I didn’t accomplish this frequently. But I did it right away because I was even more frightened of forgetting what I was saying because I was afraid of you seeing through my sad gestures toward the beautiful.

There. I believe I’ve said it.