Category: Blog

Some wealthy runners had come to the conclusion that it was impossible to run a mile in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

But on May 6, 1956, Roger Bannister caught anyone off guard. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world today knew that the four-minute hour was possible because of this change in the standard. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Therefore, in the same race, three athletes managed to cross the four-minute challenge up. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We accomplish a lot more when we think something is possible, and we only think it can be done when we see someone else doing it after all. As for human running speed, we also think there are the strictest requirements for how a website should do.

Establishing requirements for a green website

The key indicators of climate performance in most big companies are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. However, we aren’t held to any specific environmental standards in the world of websites and apps, and we only recently have access to the tools and strategies we need to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the amount of CO₂ that a website merchandise produces. We didn’t measure the pollutants coming out of the exhaust valves on our laptops. Our websites produce far-away, invisible, and unremarkable emissions when they leave fuel and gas-burning power plants. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon emissions, then we need to get what we can estimate. The following are the main elements that could be used as carbon pollution gauges:

1. Transfer of data
2. Electricity’s carbon power

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a great example of how much energy is consumed and how much carbon is released. As a rule of thumb, the more data transferred, the more energy used in the data center, telecoms networks, and end user devices.

The easiest way to calculate data transfer for a single visit for web pages is to measure the page weight, which is the page’s transfer size in kilobytes when someone first visits the page. It’s fairly easy to measure using the developer tools in any modern web browser. Frequently, the statistics for the total data transfer of any web application are included in your web hosting account ( Fig. 2.1 ).

The nice thing about page weight as a metric is that it allows us to compare the efficiency of web pages on a level playing field without confusing the issue with constantly changing traffic volumes.

A large scope is necessary to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for roughly half of this data transfer, making them the single biggest contributor to carbon emissions on a typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While most technologies, including the underlying technology of the web like data centers and transmission networks, become more and more energy efficient, websites themselves become less effective as time goes on.

You might be aware of the project team’s focus on creating faster user experiences using the concept of performance budgeting. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than vague suggestions, much like speed limits while driving, so the goal should always be to come within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use the page weight to compare it to competitors or the outdated website we’re replacing. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

We could start looking at the transferability of our web pages for repeat visitors if we want to take it one step further. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, visitors who load the same page more frequently are likely to have a high percentage of the files cached in their browser, which means they don’t need to move all the files on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. Moving beyond the first visit and measuring page weight budgets for scenarios beyond this level of detail can help us learn even more about how to optimize efficiency for users who regularly visit our pages.

Page weight budgets are easy to track throughout a design and development process. Although they don’t directly disclose their data on energy consumption and carbon emissions, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of reducing web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Electricity’s carbon power

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” (gCO₂/k Wh ) is used to describe how much carbon dioxide is produced for each kilowatt-hour of electricity ). This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, which combine energy from a variety of sources with different carbon intensity levels. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will result in significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

However, we don’t want to move our servers too far away from our users because it requires energy to transmit data through the telecom’s networks, and the more energy is used. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and measure the distance from that location to the data center used by our hosting company by using the distance itself as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how significantly lessening the distance and energy needed to transmit the data would be if it was hosted somewhere in North America, ideally on the West Coast. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. The method my team developed converts the amount of electricity transferred when loading a web page into a CO₂ figure ( Fig. ₂.4), and then converts that data into a figure for the tool. It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to take it one step further and tailor the data more precisely to the unique aspects of your project.

With the ability to calculate carbon emissions for our projects, we could even set up carbon budgets as well. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds an air of abstraction, carbon budgets do focus our minds on the main issue we’re trying to reduce, which also supports the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational burden is increasingly shifting from the data center to the users ‘ devices, whether they are smart TVs, tablets, laptops, phones, tablets, laptops, or other front-end web technologies. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React make it possible to create applications where the” thinking” process is performed either partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more energy is used by the user’s devices as a result of the user’s web browser’s increased computation. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally make them use older, slower devices and make their phones and laptops ‘ batteries discharge more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. This not only harms the environment, but it places a disproportionate financial burden on the poorest members of society.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the Safari browser’s developer console ( Fig. 2.5 ) is one of the tools we currently use.

You are aware of the moment your computer’s cooling fans start spinning so frantically that you mistakenly believe it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating and shows the percentage of CPU used and how long the CPU used when loading the web page last. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

This section will provide you with that plan of action. It covers how to incorporate safety principles into your design work in order to make tech that’s secure, how to persuade your stakeholders that this work is important, and how to respond to the critique that what we really need is more diversity. ( Spoiler: we do, but diversity alone is not the solution to fixing unethical, unsafe technology. )

The procedure for equitable safety

Your objectives when designing for protection are to:

• determine way your product can be used for misuse,
• style ways to prevent the maltreatment, and
• offer assistance for harmed people to regain control and power.

The Process for Inclusive Safety is a tool to help you reach those goals ( Fig 5.1 ). It’s a method I developed in 2018 to better understand the different methods I used to create products that were designed with safety in mind. Whether you are creating an entirely new product or adding to an existing element, the Process can help you produce your product secure and diverse. The Process includes five public areas of action:

• conducting studies
• Creating tropes
• pondering issues
• Designing options
• Testing for security

It is intended to be flexible, so teams might not want to utilize every action in all circumstances. Use the parts that are related to your special function and environment, this is meant to be something you can put into your existing style process.

And once you use it, if you have an idea for making it better or simply want to give perspective of how it helped your staff, please get in touch with me. It’s a dwelling report that I hope technicians can use as a practical and useful resource in their day-to-day work.

If you’re working on a product especially for a resilient team or survivors of some form of injury, such as an application for survivors of domestic violence, sexual abuse, or drug addiction, be sure to read Section 7, which covers that position directly and should be handled a bit different. The purpose of this design is to prioritize safety when creating a more general product with a broad user base ( which, as we already know from statistics, will include some groups who need to be protected from harm ). Chapter 7 is focused on products that are specifically for vulnerable groups and people who have experienced trauma.

Step 1: Conduct research

A thorough analysis of how your technology might be used to abuse people as well as a detailed analysis of the experiences of those who have survived and perpetrated that kind of abuse should be included in the design research. At this stage, you and your team will investigate issues of interpersonal harm and abuse, and explore any other safety, security, or inclusivity issues that might be a concern for your product or service, like data security, racist algorithms, and harassment.

broad research

Your project should begin with broad, general research into similar products and issues around safety and ethical concerns that have already been reported. For example, a team building a smart home device would do well to understand the multitude of ways that existing smart home devices have been used as tools of abuse. If your product involves artificial intelligence, be aware of the potential for racism and other issues that have been reported in other AI products. Nearly all types of technology have some kind of potential or actual harm that’s been reported on in the news or written about by academics. Google Scholar is a useful resource for locating these studies.

Specific research: Survivors

When possible and appropriate, include direct research ( surveys and interviews ) with people who are experts in the forms of harm you have uncovered. In order to gain a better understanding of the subject and avoid retraumatizing survivors, you should first interview those who work in the area of your research. If you’ve uncovered possible domestic violence issues, for example, the experts you’ll want to speak with are survivors themselves, as well as workers at domestic violence hotlines, shelters, other related nonprofits, and lawyers.

It is crucial to pay people for their knowledge and lived experiences, especially when interviewing survivors of any kind of trauma. Don’t ask survivors to share their trauma for free, as this is exploitative. While some survivors may not want to be paid, you should always make the offer in the initial ask. Alternative to paying is to donate to a cause fighting the kind of violence the interviewee experienced. We’ll talk more about how to appropriately interview survivors in Chapter 6.

Abusers specifically: research

It’s unlikely that teams aiming to design for safety will be able to interview self-proclaimed abusers or people who have broken laws around things like hacking. Don’t make this a goal, rather, try to get at this angle in your general research. Describe the ways that abusers or bad actors use technology to harm others, how they use it to silence others, and how they justify or explain the abuse.

Step 2: Create archetypes

Use your research after you’ve finished conducting it to create abuser and survivor archetypes. Archetypes are not personas, as they’re not based on real people that you interviewed and surveyed. Instead, they’re based on your research into likely safety issues, much like when we design for accessibility: we don’t need to have found a group of blind or low-vision users in our interview pool to create a design that’s inclusive of them. Instead, we base those designs on existing research and what this group requires. Personas typically represent real users and include many details, while archetypes are broader and can be more generalized.

The abuser archetype is defined as someone who views a product as a means of harm ( Fig. 5.2 ). They may be trying to harm someone they don’t know through surveillance or anonymous harassment, or they may be trying to control, monitor, abuse, or torment someone they know personally.

Someone who is being abused with the product is the survivor archetype. There are various situations to consider in terms of the archetype’s understanding of the abuse and how to put an end to it: Do they need proof of abuse they already suspect is happening, or are they unaware they’ve been targeted in the first place and need to be alerted ( Fig 5.3 )?

You may want to make multiple survivor archetypes to capture a range of different experiences. They may be aware of the abuse is occurring but not be able to stop it, such as when a stalker keeps figuring out where they are from ( Fig 5.4), or they may be aware that it is happening but not know how ( for example, when an abuser locks them out of IoT devices ). Include as many of these scenarios as you need to in your survivor archetype. These will be used later when you create solutions to help your survivor archetypes achieve their goals of preventing and ending abuse.

It may be useful for you to create persona-like artifacts for your archetypes, such as the three examples shown. Focus on their objectives rather than the demographic information we frequently see in personas. The goals of the abuser will be to carry out the specific abuse you’ve identified, while the goals of the survivor will be to prevent abuse, understand that abuse is happening, make ongoing abuse stop, or regain control over the technology that’s being used for abuse. Later, you’ll think about how to help the survivor’s goals and the abuser’s goals.

And while the “abuser/survivor” model fits most cases, it doesn’t fit all, so modify it as you need to. For example, if you uncovered an issue with security, such as the ability for someone to hack into a home camera system and talk to children, the malicious hacker would get the abuser archetype and the child’s parents would get survivor archetype.

Step 3: Remind yourself of your issues

After creating archetypes, brainstorm novel abuse cases and safety issues. You’re trying to identify entirely new safety issues that are unique to your product or service by using the term” Novel” in terms of things you’ve not found in your research. The goal with this step is to exhaust every effort of identifying harms your product could cause. You aren’t worrying about how to prevent the harm yet—that comes in the next step.

What other abuses could your product be used for besides what you’ve already discovered through your research? I recommend setting aside at least a few hours with your team for this process.

Try conducting a Black Mirror brainstorming if you’re looking for a place to start. This exercise is based on the show Black Mirror, which features stories about the dark possibilities of technology. Try to figure out how your product would be used in an episode of the show—the most wild, awful, out-of-control ways it could be used for harm. Participants typically end up having a good deal of fun when I’ve led Black Mirror brainstorms ( which I think is great because having fun when designing for safety! ). I recommend time-boxing a Black Mirror brainstorm to half an hour, and then dialing it back and using the rest of the time thinking of more realistic forms of harm.

After identifying as many opportunities for abuse as you can, you may still not feel confident that you have found every potential source of harm. A healthy amount of anxiety is normal when you’re doing this kind of work. It’s common for teams designing for safety to worry,” Have we really identified every possible harm? What if something is missing, then? If you’ve spent at least four hours coming up with ways your product could be used for harm and have run out of ideas, go to the next step.

It’s impossible to say 100 % assurance that you’ve done everything, but instead of aiming for 100 %, acknowledge that you’ve done it and will continue to prioritize safety in the future. Once your product is released, your users may identify new issues that you missed, aim to receive that feedback graciously and course-correct quickly.

Step 4: Design solutions

You should now be able to identify potential harm-causing uses for your product as well as survivor and abuser archetypes describing opposing user objectives. The next step is to identify ways to design against the identified abuser’s goals and to support the survivor’s goals. This is a good idea to include this one alongside other areas of your design process where you’re offering solutions to the various issues your research has identified.

Some questions to ask yourself to help prevent harm and support your archetypes include:

• Can you design your product in such a way that the identified harm cannot happen in the first place? What barriers can you place to stop the harm from occurring if not?
• How can you make the victim aware that abuse is happening through your product?
• How can you assist the victim in understanding what they need to do to stop the problem?
• Can you identify any types of user activity that would indicate some form of harm or abuse? Could your product help the user access support?

In some products, it’s possible to proactively detect harm that is occurring. For example, a pregnancy app might be modified to allow the user to report that they were the victim of an assault, which could trigger an offer to receive resources for local and national organizations. Although this kind of proactiveness is not always possible, it’s worthwhile to spend a half hour talking about how your product could help the user receive help in a safe manner if any kind of user activity would indicate some form of harm or abuse.

That said, use caution: you don’t want to do anything that could put a user in harm’s way if their devices are being monitored. If you do offer some kind of proactive help, always make it voluntary, and think through other safety issues, such as the need to keep the user in-app in case an abuser is checking their search history. In the next chapter, we’ll examine a good illustration of this.

Step 5: Test for safety

The final step is to evaluate the prototypes against the perspectives of your archetypes, who wants to harm the product or the victim of the harm who needs to regain control of the technology. Just like any other kind of product testing, at this point you’ll aim to rigorously test out your safety solutions so that you can identify gaps and correct them, validate that your designs will help keep your users safe, and feel more confident releasing your product into the world.

Ideally, safety testing happens along with usability testing. If you work for a company that doesn’t conduct usability testing, you might be able to use safety testing to deftly perform both. A user who uses your design while trying to use it against someone else can also be encouraged to point out interactions or other aspects of the design that don’t make sense to them.

You’ll want to conduct safety testing on either your final prototype or the actual product if it’s already been released. There is no harm in testing an existing product that wasn’t created with safety goals in mind right away; “etrofitting” it for safety is a wise thing to do.

Remember that testing for safety involves testing from the perspective of both an abuser and a survivor, though it may not make sense for you to do both. Alternatively, if you made multiple survivor archetypes to capture multiple scenarios, you’ll want to test from the perspective of each one.

You as the designer are most likely too closely connected to the product and its design at this point, just like other types of usability testing, and you know the product too well. Instead of doing it yourself, set up testing as you would with other usability testing: find someone who is not familiar with the product and its design, set the scene, give them a task, encourage them to think out loud, and observe how they attempt to complete it.

Abuse testing

The goal of this testing is to understand how easy it is for someone to weaponize your product for harm. Unlike with usability testing, you want to make it impossible, or at least difficult, for them to achieve their goal. Use your product to try to accomplish the objectives in the abuser archetype you created earlier.

For example, for a fitness app with GPS-enabled location features, we can imagine that the abuser archetype would have the goal of figuring out where his ex-girlfriend now lives. With this in mind, you’d make every effort to discover the location of a different user who has their privacy settings in place. You might try to see her running routes, view any available information on her profile, view anything available about her location ( which she has set to private ), and investigate the profiles of any other users somehow connected with her account, such as her followers.

If by the end of this you’ve managed to uncover some of her location data, despite her having set her profile to private, you know now that your product enables stalking. Reverting to step 4 and figuring out how to stop this from occurring is your next step. You may need to repeat the process of designing solutions and testing them more than once.

testing for a Survivor

testing for a Survivor involves identifying how to give information and power to the survivor. It might not always make sense based on the product or context. Thwarting the attempt of an abuser archetype to stalk someone also satisfies the goal of the survivor archetype to not be stalked, so separate testing wouldn’t be needed from the survivor’s perspective.

However, there are cases where it makes sense. For instance, a survivor archetype’s goal would be to discover who or what causes the temperature to change when they aren’t altering it themselves. You could test this by looking for the thermostat’s history log and checking for usernames, actions, and times, if you couldn’t find that information, you would have more work to do in step 4.

Another goal might be regaining control of the thermostat once the survivor realizes the abuser is remotely changing its settings. Are there any instructions that explain how to remove a user and change the password, and are they simple to locate? For your test, this would involve trying to figure out how to do this. This might again reveal that more work is needed to make it clear to the user how they can regain control of the device or account.

stress testing

To make your product more inclusive and compassionate, consider adding stress testing. This concept comes from Design for Real Life by Eric Meyer and Sara Wachter-Boettcher. The authors noted that personas typically focus on happy people, but that happy people are frequently anxious, stressed out, unhappy, or even go through a bad day. These are called” stress cases”, and testing your products for users in stress-case situations can help you identify places where your design lacks compassion. More information about how to incorporate stress cases into your design can be found in Design for Real Life, as well as in many other effective methods for compassionate design.

But how can a content management system ( CMS ) be set up to reach your current and future audience? I learned the hard way that creating a content model—a concept of information types, attributes, and relationships that let people and systems understand content—with my more comfortable design-system wondering would collapse my patient’s holistic information strategy. By developing conceptual material models that also connect related content, you can avoid that result.

I just had the opportunity to lead a Fortune 500 company’s CMS application. The customer was excited by the benefits of an holistic information plan, including material modify, multichannel marketing, and robot delivery—designing content to be comprehensible to bots, Google knowledge panels, snippets, and voice user interfaces.

A content type is essential for an omnichannel information strategy, and the model needed conceptual types, which are types of types that are categorized according to their meaning rather than their presentation. Our aim was to allow artists to create original content and use it where necessary. But as the job proceeded, I realized that supporting material utilize at the range that my client needed required the whole group to identify a new pattern.

Despite our best efforts, we remained influenced by what we were more common with: design techniques. An holistic content strategy cannot rely on WYSIWYG design and layout tools, unlike web-focused willing strategies. Our tendency to approach the material model with our common design-system thinking frequently led us to veer away from one of the main purposes of a material model: delivering content to audiences on various marketing channels.

Two fundamental tenets must be followed in order to create a successful content model

We had to explain to our designers, developers, and stakeholders that their previous web projects had taught them that content should be treated as visual building blocks that fit into layouts. The previous approach was not only more familiar but also more intuitive—at least at first—because it made the designs feel more tangible. We learned two guiding principles that helped the team understand how a content model and the design processes we were familiar with were:

1. Instead of layout, semantics must be used by content models.
2. And content models should connect content that belongs together.

Semantic content models

A semantic content model uses type and attribute names that reflect the content’s intended purpose and not how it will be displayed. For example, in a nonsemantic model, teams might create types like teasers, media blocks, and cards. These types may make it simple to present content, but they do not aid in understanding the meaning of the content, which would have opened the door to the content presented in each marketing channel. To allow each delivery channel to comprehend the content and use it as it sees fit, a semantic content model uses type names like product, service, and testimonial.

When you’re creating a semantic content model, a great place to start is to look over the types and properties defined by Schema. a community-driven resource for type definitions that are understandable on platforms like Google search .org

A semantic content model has a number of advantages:

Even if your team doesn’t care about omnichannel content, a semantic content model decouples content from its presentation so that teams can evolve the website’s design without needing to refactor its content. Content can withstand obtrusive website redesigns in this way.
• A competitive advantage can also be gained by a semantic content model. By adding structured data based on Schema. Using its types and properties, a website can provide hints to help Google understand the content, display it in search snippets or knowledge panels, and use it to respond to voice-interface user questions. Without ever visiting your website, potential visitors could easily find your content.
• Beyond those practical benefits, you’ll also need a semantic content model if you want to deliver omnichannel content. Delivery channels must be able to comprehend the same content in order to use it across multiple marketing channels. For instance, if your content model provided a list of questions and answers, it could be used as a voice interface or by a bot to answer frequently asked questions ( FAQ ) pages.

For example, using a semantic content model for articles, events, people, and locations lets A List Apart provide cleanly structured data for search engines so that users can read the content on the website, in Google knowledge panels, and even with hypothetical voice interfaces in the future.

connective content models

Instead of slicing up related content across disparate content components, I’ve come to the realization that the best models are those that are semantic and also connect related content components ( such as a FAQ item’s question and answer pair ). A good content model connects content that should remain together so that multiple delivery channels can use it without needing to first put those pieces back together.

Write an essay or article about it. The piece of an article’s meaning and usefulness depend on how well it is organized. Would one of the headings or paragraphs be meaningful on their own without the context of the full article? Our well-known design-system thinking on our project frequently led us to want to develop content models that would divide content into distinct chunks to fit the web-centric layout. This had a similar effect to an article that had its headline removed. Because we were slicing content into standalone pieces based on layout, content that belonged together became difficult to manage and nearly impossible for multiple delivery channels to understand.

Let’s examine how connecting related content can be used in a practical setting to illustrate. A complex layout for a software product page that included multiple tabs and sections was presented by the client’s design team. Our instincts were to follow suit with the content model. Shouldn’t we make adding any number of tabs in the future as simple and flexible as possible?

We felt like we needed a “tab section” content type because our design-system instincts allowed for the addition of multiple tab sections to a page because they were so well-versed. Each tab section would display various types of content. The software’s overview or specifications might be available in one tab. A second tab might provide a list of sources.

Our inclination to break down the content model into “tab section” pieces would have led to an unnecessarily complex model and a cumbersome editing experience, and it would have also created content that couldn’t have been understood by additional delivery channels. How would a different system have been able to determine which “tab section” referred to a product’s specifications or resource list, for instance? Would that system have had to have used tab sections and content blocks to calculate this? This would have prevented the tabs from ever being rearranged, and it would have required adding logic to each other delivery channel to interpret the layout of the design system. Furthermore, if the customer were to have no longer wanted to display this content in a tab layout, it would have been tedious to migrate to a new content model to reflect the new page redesign.

Our customer had a breakthrough when we realized that for each tab, a specific purpose in mind would be revealed, such as the software product’s overview, specifications, related resources, and pricing. Once implementation began, our inclination to focus on what’s visual and familiar had obscured the intent of the designs. It wasn’t long after a little digging that the content model didn’t like the idea of tabs. What was important was the meaning of the information that was intended to be displayed in the tabs.

In fact, the customer could have decided to display this content in a different way—without tabs—somewhere else. In response to this realization, we created content types for the software product based on the meaningful attributes the client wanted to display on the web. There were rich attributes like screenshots, software requirements, and feature lists as well as obvious semantic attributes like name and description. The software’s product information stayed together because it wasn’t sliced across separate components like “tab sections” that were derived from the content’s presentation. Any delivery channel, including those that follow, could comprehend and display this content.

Conclusion

In this omnichannel marketing project, we discovered that the best way to keep our content model on track was to ensure that it was semantic ( with type and attribute names that reflected the meaning of the content ) and that it kept content together that belonged together ( instead of fragmenting it ). These two ideas made it easier for us to decide what to do with the content model based on the design. Remember: If you’re developing a content model to support an omnichannel content strategy, or even if you just want to make sure that Google and other interfaces understand your content, keep in mind:

• A design system isn’t a content model. You should maintain the semantic value and contextual structure of the content strategy throughout the entire implementation process because team members might be tempted to combine them and to make your content model resemble your design system. Without the use of a magic decoder ring, every delivery channel can now consume the content.
• If your team is struggling to make this transition, you can still reap some of the benefits by using Schema. Your website uses structured data from org. The advantage of search engine optimization is a compelling argument on its own, even if additional delivery channels are not in the works.
• Additionally, remind the team that decoupling the content model from the design will let them update the designs more easily because they won’t be held back by the cost of content migrations. They will be prepared for the upcoming big thing, and they will be able to create new designs without compromising compatibility between the design and the content.

By firmly defending these ideas, you’ll help your team treat content the way it deserves as the most important component of your user experience and the best way to engage with your audience.

Cartons are used to style CSS. In fact, the whole website is made of containers, from the computer viewport to components on a webpage. However, every now and then a new element emerges that prompts us to reevaluate our style philosophy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. Additionally, dual-screen or portable devices force us to consider how to make the most of the available room in various device configurations.

These latest changes to the online platform have made it both more difficult and fascinating to create products. They’re wonderful opportunities for us to break out of our triangular containers.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Liberal Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they’re flexible, shareable, and stable, just like sites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it can be challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What does a standard desktop PWA app look like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color home ), but that’s about it.

What if we could consider other ways and reclaim the whole window in the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

This is exactly what the Window Controls Overlay provides. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and glass controls

Let’s get started with an explanation of what the window and name handles are.

The title bar is the place displayed at the top of an game glass, which frequently contains the phone’s name. The buttons or buttons that are displayed at the top of an app’s window are the ones that allow it to lessen, increase, or close its window.

Window Controls Overlay removes the natural barrier of the name bar and windows controls areas. The title bar and glass control buttons can be overlayed on top of the user’s internet material, allowing it to free up the entire height of the game window.

If you are reading this article on a desktop computer, get a quick glance at another software. Prospects are they’re currently doing something similar to this. In fact, the internet browser you are using uses the major area to show tabs.

Spotify displays album artwork to the top of the application window at the very top.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience across a variety of platforms without having a negative impact on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using only CSS and a single HTML element in this straightforward CSS playground.

The app has two pages. The first lists your existing CSS designs:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on the desktop because I added a straightforward web manifest and service representative. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area extended to the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

Enabling Window Controls Overlay

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been incorporated into Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of window controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing we need to change is this manifest change, which will make the title bar disappear and convert the window controls into an overlay.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

Here is how the app currently looks:

Our logo, search field, and NEW button are now partially covered by the window controls, but the title bar has been removed, which is what we wanted.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been added to the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. Our header, which includes the logo, search bar, and NEW button, will be placed using two of the variables in our case.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The app appears much more like a native app.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are several definitions for it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in a variety of ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

Here is the function we’ll employ:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can drag and click their way to a sizable area in the title bar, but when using the Window Controls Overlay feature, they are limited to where the control buttons are, and must carefully place their fingers in between these buttons to move the window.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to make any feature of the app a drag target for the window:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. Let’s take a different strategy, then. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be with the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. In our situation, there won’t be enough room for the search field, logo, and button to fit because the user made the window very narrow. We would need to lower them a little.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

Three intriguing things are provided by the API:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangeenables us to determine changes in size or visibility.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• The title bar area is different for different operating systems, which is great because Mac and Windows have different title bar sizes. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can use the above CSS code to move our header down and move the thumbnails down in accordance with this.

Thirty pixels of exciting design opportunities

Our straightforward demo app was transformed into something that felt much more connected to desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room, and it presents challenges for using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. To make it easier for us web authors to integrate more and more fully with those devices, new features are added to the web platform. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. We can now think beyond the rectangular box when building for the web.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

You can report bugs to the spec’s repository if you have the chance to try the Window Controls Overlay feature and have feedback on it. It’s still early in the development of this feature, and you can help make it even better. Or you can look at this demo app and its source code, the feature’s existing documentation, or the feature’s existing documentation.

Here’s the key. To encourage stakeholders to determine high-risk assumptions and invisible complexity, you must work with them to mobilize them as much as you do to obtain answers from users. Generally, you need to make them think it’s their plan.

By bringing the group up around two straightforward issues, I’ll show you how to collectively introduce alignment and cracks in the group’s shared understanding in this article.

1. What are the materials?
2. What are the interactions between those things?

A cross between panel design and analysis

These two issues correlate to the first two methods of the ORCA approach, which may be your new best friend when it comes to reducing speculation. Delay, what’s ORCA? Glad you asked.

ORCA stands for Things, Relationships, CTAs, and Values, and it outlines a process for creating good object-oriented user experience. My style philosophy is based on object-oriented UX. ORCA is an iterative strategy for synthesizing person study into an elegant fundamental foundation to help monitor and conversation design. My work as a UX designer has become more creative, productive, successful, fun, proper, and meaningful thanks to OOUX and ORCA.

The ORCA approach has four incremental shells and a staggering fifteen steps. In each round we get more precision on our System, Rupees, Computer, and As.

ORCA is often described as a “garbage in, garbage out” procedure. To ensure that the verifiable design produced in the last round truly tests properly, the procedure needs to be fed by good research. The ORCA process’s end serves another purpose: it enables you to justify the need for research if you don’t have a lot of it.

In other words, the ORCA process serves as a gauntlet between research and design. You can gracefully ride the killer whale from research to design with good research. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It starts to reveal what this timeless comic so skillfully demonstrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. Every decision-maker is confident in their own mental picture, which is another reason why we frequently can’t sell research.

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

However, how we go about doing this is crucial. However much we might want to, we can’t just tell everyone,” YOU ARE WRONG”! Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders accept responsibility for their beliefs and understanding gaps, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Let’s say your users are physicians. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying:” We need to understand doctors better! What are their issues? How do they use the current app”? Here’s the issue with that, though. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This conversation is more similar to what you need to facilitate. Let’s listen in:

” Wait a sec, how frequently do doctors share patients?” Does a patient in this system have primary and secondary doctors”?

” Can a patient even have more than one primary doctor”?

Is it a “primary doctor” or just a “primary caregiver” ?Can’t that position be considered a nurse practitioner?

” No, caregivers are something else… That’s the patient’s family contacts, right”?

” So are caregivers in scope for this redesign”?

” Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment”?

We are currently traveling somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? The diabolical goal is to gently and diplomatically shake their confidence.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And most likely as a result of this, software will be more confusing, complicated, and less intuitive.

The two questions

But how do we approach these types of contentious inquiries diplomatically, effectively, collaboratively, and reliably?

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the materials?
2. What are the interactions between those things?

In practice, getting to these answers is easier said than done. I’m going to demonstrate how these two straightforward questions can serve as the Object Definition Workshop’s starting point. During this workshop, these” seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Noun foraging prep work

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders ( and entire cross-functional team, hopefully ). But first, you need to do some prep work.

In essence, search for nouns that are specific to your project’s business or industry and from at least a few sources. I call this noun foraging.

Just a few excellent noun foraging sources can be found here:

• the product’s marketing site
• the product’s competitors ‘ marketing sites ( competitive analysis, anyone? )
• the already-existing product ( check the labels! )!
• user interview transcripts
• vision documents or notes from stakeholder interviews

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. Use those if all you have is a marketing website, some screenshots of the current legacy system, and access to customer service chat logs.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them ( preferably on blue sticky notes if you’ll be creating an object map later! …

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Consider, for instance, a library app. Is “book” an object?

Can you think of a few attributes for this potential object? Title, author, publish date … Yep, it has structure. Check!

What are some illustrations of this potential “book” object, for instance? Can you name a few? Check out The Alchemist, Ready Player One, and Everybody Poops!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library … Check, check, check!

Focus on capturing the nouns that have SIP as you are noun foraging. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is using your dropdown to play in your digital space! They are coming for the VALUABLE THINGS and what they can do with them. These things, or objects, are what we are trying to identify.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

I’d first take a look at my own email client, which turns out to be Gmail. I’d then look at Outlook and the new HEY email. I would examine Hotmail, Yahoo, and even Basecamp and other’email replacers’. I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

( Before moving on, feel free to go noun foraging for this fictitious product as well, and then scroll down to see how closely our lists correspond. Just don’t get lost in your own emails! Rejoice to me again!

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact groups
• attachment
• Google doc file / other integrated file
• newsletter? ( HEY views this in a different way )
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. It might be a client or automation in our email example. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: Here are some real nouns that I needed my stakeholders to understand during my own past project work:

• Record Locator
• Home of Incentive
• Augmented Line Item
• Curriculum-Based Measurement Probe

A list of nouns that represent potential objects and a short list of nouns that need to be further defined are really all you need to prepare for the workshop session.

Facilitate an Object Definition Workshop

Noun foraging can be used as a starting point for your workshop; this can be done in concert. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Here, affinity mapping is your friend!

If your team is short on time and might be reluctant to do this kind of grunt work ( which is usually the case ) do your own noun foraging beforehand, but be prepared to show your work. I enjoy showing screenshots of documents and screens that have all the highlighted nouns. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. We’ll keep that a secret; you just need to let them know that you‘re looking for gaps in the team’s understanding so that you can demonstrate the need for more user research. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers.

Let the whack-a-mole question then begin.

1. What is this thing?

Want to have genuine fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Then, have everyone present their cards at once, and see if you get different definitions (you will ). This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty appears, quietly ( but clearly ) begin a parking lot with “open questions.” � �

Here’s a fantastic follow-up after definitions solidify:

2. Do our users know what these things are? What do users refer to this as?

Stakeholder 1: They probably call email clients “apps”. I’m not certain, though.

Stakeholder 2: Automations are often called “workflows”, I think. Or, maybe users think workflows are something different.

Ask the group to decide whether to use only that term in the near future if it becomes more user-friendly. This way, the team can better align to the users ‘ language and mindset.

Okay, let’s get started.

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Are these the same thing? Or are these different? How are they different if they are different from one another?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Without a doubt.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images.

Continually expand your expanding glossary of terms. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Are saved responses and templates in any way connected to each other?

Stakeholder 3: Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? When the user is creating the saved response, does that occur? Or when they apply the saved response to an email? How does that actually operate?

Listen. Capture uncertainty. When the number of “open questions” reaches a critical mass, pause to begin asking questions of groups or individuals. Some questions might be for the dev team ( hopefully at least one developer is in the room with you ). Someone who couldn’t make it to the workshop might have a question. And many questions will need to be labeled “user”.

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next query makes it easier for the team to concentrate on what your users are most interested in. You can simply ask,” Are saved responses in scope for our first release”?, but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to order these items either in small breakout groups or separately from the most important. Then, like you did with the definitions, have everyone reveal their sort order at once. Unsurprisingly, it’s not unusual for the VP to place something like” saved responses” at the top of the list while everyone else places it at the bottom. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. The three groups ‘ wildly different sort orders were displayed on the whiteboard.

The CEO nodded his head and said,” This is why we haven’t been able to move forward in two years.”

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects ‘ relationships

We’ve already tried to figure out what two things are different, but this time, we wanted to ask the team about every possible relationship. For each object, ask how it relates to all the other objects. In what ways are the objects connected? Use your dependable boxes and arrows technique to make the connections all recognizable. Here, we are connecting our objects with verbs. I prefer to keep my verbs to simple statements like “has a” and “has many”

This system modeling activity brings up all sorts of new questions:

• Can an attachment in a saved response be present?
• Can a saved response use a template? Can the user override a template in an email that has been saved as a template?
• Do users want to see all the emails they sent that included a particular attachment? For example,” show me all the emails I sent with ProfessionalImage. attached .jpg I’ve changed my professional photo and I want to alert everyone to update it”.

The workshop participants might provide solid responses directly. Great! Capture that new shared understanding. However, keep adding questions to your expanding parking lot as uncertainty arises.

Light the fuse

You’ve set up the floodgates strategically so that the explosives can be seen everywhere. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Have the group reflect on the list of open questions before the workshop ends. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

Here’s your final move. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out”?

With this approach, we are making our decision-makers fight for user research because they themselves define questions as high-risk. Sorry, not sorry.

This is your moment of truth. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions.

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions don’t force the user to choose any default responses. They should be open-ended.

Final words: Hold the screen design!

Seriously, if you’re ever going to design screens again, make sure you first address these fundamental inquiries: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and ( it almost feels like a bonus at this point! ) users will be more receptive to what you put out into the world.

Before you begin building screens, I sincerely hope this will free up your time and money to spend on user education and clarifying what you are designing. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots.

Wish you the best of luck! Now go sell research!

The mobile-first style approach is fantastic because it concentrates on what is most important to the consumer, it’s well-practiced, and it’s a well-known style design for years. But developing your CSS mobile-first should also be fantastic, too…right?

Well, not necessarily. Classic mobile-first CSS development is based on the principle of overwriting style declarations: you begin your CSS with default style declarations, and overwrite and/or add new styles as you add breakpoints with min-width media queries for larger viewports (for a good overview see “What is Mobile First CSS and Why Does It Rock?”). But all those exceptions create complexity and inefficiency, which in turn can lead to an increased testing effort and a code base that’s harder to maintain. Admit it—how many of us willingly want that?

Mobile-first CSS may yet be the best option for your own projects, but you need to first determine how ideal it is in light of the physical design and user interactions you’re working on. To help you get started, here’s how I go about tackling the elements you need to watch for, and I’ll discuss some alternative remedies if mobile-first doesn’t seem to fit your job.

benefits of mobile-first technology

Some of the benefits of mobile-first CSS creation, and why it’s been the de facto growth practice for so long, make a lot of sense:

Development pyramid. A good development hierarchy is one thing you definitely get from mobile-first; you just concentrate on the cellular view and start developing.

tested and verified. It’s a tried and tested technique that’s worked for years for a cause: it solves a problem actually also.

prioritizes the portable watch. The mobile view is the simplest and arguably the most significant because it covers all the crucial user journeys and frequently accounts for a higher proportion of user visits ( depending on the project ) ).

Stops desktop-centric growth. It can be tempting to first focus on the desktop perspective because desktop computers are used for growth. However, considering mobile from the beginning prevents us from getting stuck eventually; no one wants to spend their time getting a site that is focused on desktops to operate on mobile devices!

Drawbacks of mobile-first

Model declarations can be set at lower breakpoints and therefore overwritten at higher breakpoints:

more complicated stuff. The farther up the target order you go, the more unnecessary script you inherit from lower thresholds.

higher CSS sensitivity A school name declaration with a turned default value for a style has a higher specificity today. This can be a pain on big projects when you want to preserve the CSS candidates as simple as possible.

Requires more analysis tests. All higher thresholds must be regression tested if CSS changes at lower views ( such as adding a new fashion ).

The browser can’t prioritize CSS downloads. At wider breakpoints, classic mobile-first min-width media queries don’t leverage the browser’s capability to download CSS files in priority order.

Property price issue overrules its own.

There is nothing intrinsically wrong with overwriting principles, CSS was designed to do just that. However, inheriting incorrect principles can be laborious and ineffective, which is counterproductive. When you have to replace styles to restore them back to their defaults, which may cause issues after, especially if you are using a combination of bespoke CSS and power classes, it can also lead to more fashion precision. We won’t be able to use a power school for a design that has been restore with a higher precision.

With this in mind, I’m developing CSS with a focus on the default values much more these days. Since there’s no specific order, and no chains of specific values to keep track of, this frees me to develop breakpoints simultaneously. I concentrate on finding common styles and isolating the specific exceptions in closed media query ranges (that is, any range with a max-width set). 

As you can view each breakpoint as a clean slate, this approach opens up some opportunities. It’s acceptable and can be coded in the default style sheet if a component’s layout appears to be based on Flexbox at all breakpoints. But if it looks like Grid would be much better for large screens and Flexbox for mobile, these can both be done entirely independently when the CSS is put into closed media query ranges. Additionally, having a thorough understanding of any given component in all breakpoints upfront is necessary for developing simultaneously. This can help identify issues in the design more quickly during the development process. We don’t want to get stuck down a rabbit hole building a complex component for mobile, and then get the designs for desktop and find they are equally complex and incompatible with the HTML we created for the mobile view!

Although this strategy won’t work for everyone, I urge you to try it. There are plenty of tools available to support concurrent development, including Responsively App, Blisk, and many others.

Having said that, I don’t feel the order itself is particularly relevant. If you like to work on one device at a time, are comfortable with focusing on the mobile view, and have a good understanding of the requirements for other breakpoints, then you should definitely stick to the classic development order. It’s crucial to find common styles and exceptions in the appropriate stylesheet, which is a manual tree-shaking procedure! Personally, I find this a little easier when working on a component across breakpoints, but that’s by no means a requirement.

Closed media query ranges are used in real life.

We overwrite the styles in the traditional mobile-first CSS, but media query ranges can be used to prevent this. To illustrate the difference ( I’m using SCSS for brevity ), let’s assume there are three visual designs:

• smaller than 768
• from 768 to less than 1024
• 1024 and anything larger

Take a simple example where a block-level element has a default padding of “20px,” which is overwritten at tablet to be “40px” and set back to “20px” on desktop.

.my-block { padding: 20px; @media (min-width: 768px) { padding: 40px; } @media (min-width: 1024px) { padding: 20px; }}

.my-block { padding: 20px; @media (min-width: 768px) and (max-width: 1023.98px) { padding: 40px; }}

The subtle difference is that the mobile-first example sets the default padding to “20px” and then overwrites it at each breakpoint, setting it three times in total. In contrast, the second example sets the default padding to “20px” and only overrides it at the relevant breakpoint where it isn’t the default value (in this instance, tablet is the exception).

The goal is to: 

• Only set styles when needed. 
• Not set them with the expectation of overwriting them later on, again and again. 

To this end, closed media query ranges are our best friend. If we need to make a change to any given view, we make it in the CSS media query range that applies to the specific breakpoint. We’ll be much less likely to introduce unwanted alterations, and our regression testing only needs to focus on the breakpoint we have actually edited. 

Taking the above example, if we find that .my-block spacing on desktop is already accounted for by the margin at that breakpoint, and since we want to remove the padding altogether, we could do this by setting the mobile padding in a closed media query range.

.my-block {  @media (max-width: 767.98px) {    padding: 20px;  }  @media (min-width: 768px) and (max-width: 1023.98px) {    padding: 40px;  }}

The browser default padding for our block is “0,” so instead of adding a desktop media query and using unset or “0” for the padding value (which we would need with mobile-first), we can wrap the mobile padding in a closed media query (since it is now also an exception) so it won’t get picked up at wider breakpoints. At the desktop breakpoint, we won’t need to set any padding style, as we want the browser default value.

Bundling versus separating the CSS

Back in the day, keeping the number of requests to a minimum was very important because the browser's concurrent requests limit (typically around six ) was high. In consequence, using image sprites and CSS bundling was the norm, with all the CSS being downloaded as a single stylesheet with the highest priority.

With HTTP/2 and HTTP/3 now on the scene, the number of requests is no longer the big deal it used to be. This enables us to use a media query to break CSS into multiple files. The obvious benefit of this is that the browser can now request the CSS it currently requires with a higher priority than the CSS it doesn't. This is more performant and can reduce the overall time page rendering is blocked.

What version of HTTP do you use?

Go to your website and open your browser's dev tools to find out which version of HTTP you're using. Next, select the Network tab and make sure the Protocol column is visible. If "h2" is included in the protocol list, that indicates that HTTP/2 is being used.

Note: To check the Protocol column in your browser's dev tools, right-click any column header ( such as Name ), go to the Network tab, reload your page, and then check the Protocol column.

Also, if your website is still using HTTP/1... WHY?! What are you waiting for? Excellent user support exists for HTTP/2.

CSS should be split.

Separating the CSS into individual files is a worthwhile task. Linking the separate CSS files using the relevant media attribute allows the browser to identify which files are needed immediately (because they’re render-blocking) and which can be deferred. Based on this, it allocates each file an appropriate priority.

In the following example of a website visited on a mobile breakpoint, we can see the mobile and default CSS are loaded with" Highest" priority, as they are currently needed to render the page. In case they are needed later, the remaining CSS files ( print, tablet, and desktop ) are still being downloaded with" Lowest" priority, though they are still needed.

Before rendering can begin, the browser will need to download and parse the CSS file when using bundled CSS.

While, as noted, with the CSS separated into different files linked and marked up with the relevant media attribute, the browser can prioritize the files it currently needs. Using closed media query ranges allows the browser to do this at all widths, as opposed to classic mobile-first min-width queries, where the desktop browser would have to download all the CSS with Highest priority. We can’t assume that desktop users always have a fast connection. For instance, in many rural areas, internet connection speeds are still slow. 

Depending on project requirements, the media queries and the number of separate CSS files may vary from one project to the next, but the example below may look similar.

Depending on the project’s deployment strategy, a change to one file (mobile.css, for example) would only require the QA team to regression test on devices in that specific media query range. Compare that to the prospect of deploying the single bundled site.css file, an approach that would normally trigger a full regression test.

Moving on

The adoption of mobile-first CSS was a significant milestone in web development because it allowed front-end developers to concentrate on mobile web applications rather than creating websites for desktop use and attempting to retrofit them to work on other devices.

I don't think anyone wants to return to that development model again, but it's important we don't lose sight of the issue it highlighted: that things can easily get convoluted and less efficient if we prioritize one particular device—any device—over others. For this reason, it seems natural to concentrate on the CSS in its own right, always mindful of what is the default setting and what constitutes an exception, as a result. I've started to notice subtle simplifications in both the CSS and other developers', and that the work is also a little more organized and effective.

In general, simplifying CSS rule creation whenever we can is ultimately a cleaner approach than going around in circles of overrides. However, whatever method you use, it must fit the project. Mobile-first may turn out to be the best option for the situation at hand, but first you need to fully comprehend the trade-offs you're entering.

However, we’re still very far from this perfect.

At the time, I didn’t realize yet how to functionally combine morality. Yes, I did discover some tools in other jobs that had worked well for me, such as using checklists, notion monitoring, and “dark truth” sessions. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I made the decision to investigate deeper the causes of organization that prevent us from practicing regular social style. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine morality. And it’s unexpectedly easy! However, we must first move out to understand what we’re up against.

Control the structure

Unfortunately, we’re confined to a capitalist system that encourages commercialism and inequality and is obsessed with the irrationality of infinite expansion. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Over the past few decades, those goals have transformed our well-meaning human-centered mentality into a potent tool that encourages ever-higher levels of consumption. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. We’re a part of the problem, even with our best intentions, and we’re doing it despite our best efforts to suggest that we provide solutions for people.

What can we do to alter this?

We may begin by acting on the appropriate level of the system. A system intellectual named Donna H. Meadows after outlined ways to influence a system in order of success. When you apply these to architecture, you get:

You can change figures like functionality results or the number of layout critiques at the lowest level of effectiveness. But none of that may change the direction of a business.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• A business can improve its ability to achieve its goals by concentrating instead on administration control, employee recognition, or design-system purchases. But that doesn’t alter the goals themselves, which means that the business may also work against your ethical-design ideals.
• The change of honest methods, toolkits, articles, conferences, workshops, and other topics are what most ethical-design initiatives are currently focusing on at the next level, details flows. This is also where moral style has remained largely theoretical. We’ve been focusing on the wrong level of the system all this day.
• Consider rules, for instance; they consistently surpass information. There can be commonly accepted guidelines, such as how fund works, or a sprint group’s concept of done. However, illegal laws intended to maintain profits is also smother social design, which are frequently revealed through statements like” the customer didn’t ask for it” or “don’t make it very big.”
• Changing the rules without holding official power is very hard. That’s why the next level is so influential: self-organization. Experimentation, bottom-up initiatives, passion projects, self-steering teams, and other such self-organization techniques all contribute to the resilience and creativity of a business. It’s exactly this diversity of viewpoints that’s needed to structurally tackle big systemic issues like consumerism, wealth inequality, and climate change.
• But objectives and metrics are even more powerful than self-organization. Our companies want to make more money, which means that everything and everyone in the company does their best to… make the company more money. And once I realized that profit is nothing more than a measurement, I understood how crucial a very specific, defined metric can be toward pushing a company in a certain direction.

What is the conclusion? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

However, we all know that the three dimensions are not equally important: viability is ultimately what determines whether a product will become functional. So a more realistic representation might look like this:

The means are feasibility and desire, while viability is the objective. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. Therefore, both the company’s goals and its viability are important in order to realize what they are trying to accomplish. It makes intuitive sense: to achieve most anything, you need resources, people, and money. Fun fact: the Italian language does not distinguish between viability and feasibility; both are merely fattibilità.

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. When deciding whether a product is safe for people, such as user satisfaction or conversion, durability goals are unimportant. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They are unable to restore a healthy relationship with nature.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. There are many variations of these models, some calling them “imputability, integrity, or responsibility.” What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There is no one way to accomplish this because it greatly depends on your country’s culture, values, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

pursue equity, sustainability, and well-being

We created objectives that address design’s effect on three levels: individual, societal, and global.

An objective on a personal level teaches us that success transcends the typical area of user experience and satisfaction, taking into account factors like how much time and effort are required of users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are non-misleading, transparent, and calm. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

A societal goal requires us to consider our impact beyond the mere user, widening our focus to the economy, communities, and other involuntary parties. We called this objective equity:

We create products and services that have a positive social impact. We think of racial justice, inclusiveness and diversity of people as teams, users, and customer segments as indicators of economic equality. We listen to local culture, communities, and those we affect.

Finally, the global goal of maintaining harmony with humanity’s only home is the one we have. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our solutions promote the circular economy by generating value from waste, reusing products, and giving priority to sustainable choices. We deliver functionality instead of ownership, and we limit energy use.

In essence, ethical design ( to us ) meant achieving well-being for each user and an equitable value distribution within society through a design that can sustain our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

However, defining these goals is still insufficient. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

This overview provides examples of metrics you can use to measure your progress toward equity, well-being, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. This example was once provided by Donella Meadows:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not lead to national security.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if we instead used metrics for ( digital ) well-being to measure success, such as ( reduced ) screen time or software energy consumption?

There’s another important message here. If we set an objective to create a calm interface, we might still end up with a screen that makes people anxious, even if we set the wrong metric for calmness, such as the number of interface elements. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. When you perform the task of selecting metrics for our goals, you are made to consider what success looks like in terms of words and how you can demonstrate that you have met your ethical goals. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The response to this query provides a lot of focus and clarity.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. Making the decision to” simply” use your imagination and pick one of the many resources and knowledge resources at your disposal.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Would a simple illustration suffice, or should you go with that energizing video? Which typeface is the most calm and inclusive? What fresh techniques and tools do you employ? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How can you ensure that those who are affected by decisions are present when they are made? How can you measure our effects?

The definition of success will fundamentally alter what it means to do good design.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Kick it off or return to the pre-existing situation.

The kickoff is the most important meeting that can be so easy to forget to include. There are two main stages to it: 1 ) the alignment of expectations and 2 ) the success definition.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Possumptions are raised and discussed. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For instance, we conducted an online kickoff with the client, a subject-matter expert, and two other designers for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. However, agreeing on the project’s success means having respect for its desirability, viability, feasibility, and ethics is just as crucial as expressing expectations. What are the objectives in each dimension?

It’s crucial to reach an understanding of what success means at this early stage because you can depend on it for the duration of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. As we agreed in our first meeting, having A and B’s diverse user group is essential to creating a successful product. So we do activity X and follow research process Y”. Compare those odds to a situation where the team had to ask for permission halfway through the project and didn’t agree to it in advance. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. A set of outer rings is used to measure the objectives, as well as an inner ring that is intended to capture ideas for those objectives. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We explored each dimension and recorded ideas on digital sticky notes. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. Additionally, the subject-matter expert stressed the value of involving students from underprivileged and low-income groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s history and purpose: What is the purpose of this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• how will we go about defining the scope, process, and role descriptions?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

How do I begin with ethical design? have a number of coworkers asked me over the past year. My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. There’s no skipping this step if you want to be an ethical, responsible designer.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you think of yourself as a system designer, you need to understand how your industry influences consumerism and inequality, how finance drives business, and how to think creatively about how to use the most powerful tools to influence the system. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Gather your coworkers to set design goals for sustainability, well-being, and equity. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Give them their opinions, make them known and understandable, ask for their consent, and expect them to follow through with it.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my coworkers had questions to ask, such as” Will they take this seriously?” and” Wouldn’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It’s a tempting thought, isn’t it? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

However, as systems theory suggests, that’s not enough. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t allow ourselves to be disconnected from the real world and enjoy our preferred working-from-home lifestyle while remaining trapped in the design-for-design bubble. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. By challenging them to redefine success in business, we must actively engage with our colleagues and clients.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We simply need to come to terms with the right goals when starting each design project, identify the appropriate metrics, and acknowledge that we already have everything in place. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.

Humility, a writer’s most important quality, has a great circle to it. What about sincerity, an business manager’s important value? Or a doctor’s? Or a teacher’s? They all have fantastic sounds. When humility is our guiding light, the course is usually available for fulfillment, development, relation, and commitment. We’ll discuss why in this section.

That said, this is a guide for developers, and to that conclusion, I’d like to begin with a story—well, a voyage, actually. Along the way, I’m going to render myself a little vulnerable. I call it:

The Absurd Pate of Justin: A Tale

When I was coming out of arts school, a long-haired, goateed novice, write was a known quantity to me, design on the web, however, was riddled with complexities to understand and learn, a problem to be solved. Although I had formal training in typography, layout, and creative design, what most intrigued me was how these traditional skills could be applied to a young online landscape. This theme may eventually form the rest of my job.

But I drained HTML and JavaScript books until the early hours of the morning and self-taught myself how to code during my freshman year rather than student and go into write like many of my friends. I wanted—nay, needed—to better understand the underlying relevance of what my design decisions may think when rendered in a website.

The so-called” Wild West” of website design was the late 1990s and early 2000s. Manufacturers at the time were all figuring out how to use layout and visual connection to the online environment. What regulations were in place? How may we break them and also engage, entertain, and present information? How was my values, which include modesty, respect, and connection, coincide with that on a more general level? I was eager to find out.

Even though I’m referring to a different time, those are amazing factors between non-career relationships and the world of layout. What are your main passions, or ideals, that elevate medium? The main themes are the same, basically the same as what we previously discussed on the immediate parallels between what fulfills you, independent of the physical or digital realms.

First within tables, animated GIFs, Flash, then with Web Standards, divs, and CSS, there was personality, raw unbridled creativity, and unique means of presentment that often defied any semblance of a visible grid. Splash screens and “browser requirement” pages aplenty. Usability and accessibility were typically victims of such a creation, but such paramount facets of any digital design were largely (and, in hindsight, unfairly) disregarded at the expense of experimentation.

For instance, this iteration of my personal portfolio site (” the pseudoroom” ) from that time was experimental if not a little overt in terms of visualizing how the idea of a living sketchbook was conveyed. Quite skeuomorphic. On this one, I worked with fellow artist and dear buddy Marc Clancy, who is now a co-founder of the creative task organizing app Milanote, to outline and then play with various user interactions. Finally, I’d break it down and script it into a modern layout.

Along with pattern book pieces, the site even offered free downloads for Mac OS customizations: pc wallpapers that were successfully style experimentation, custom-designed typefaces, and desktop icons.

GUI Galaxy was a design, pixel art, and Mac-centric news portal that graphic designer friends and I developed from around the same time.

Design news portals were incredibly popular at the time, and they now considered Tweet-sized, small-format snippets of relevant news from the categories I previously covered. If you took Twitter, curated it to a few categories, and wrapped it in a custom-branded experience, you’d have a design news portal from the late 90s / early 2000s.

We had evolved into a bandwidth-sensitive, award-winning, much more accessibility-conscious website using web standards. Still ripe with experimentation, yet more mindful of equitable engagement. There are a few content panes here, with both Mac-focused news and general news (tech, design ) to be seen. We also offered many of the custom downloads I cited before as present on my folio site but branded and themed to GUI Galaxy.

The presentation layer of the website’s backbone was made up of global design + illustration + news author collaboration. The backbone was a homegrown CMS. And the collaboration effort here, in addition to experimentation on a’ brand’ and content delivery, was hitting my core. We were creating something bigger than just one of us and establishing a global audience.

Collaboration and connection transcend medium in their impact, immensely fulfilling me as a designer.

Now, why am I taking you on this trip through design memory lane? Two reasons.

First, there’s a reason for the nostalgia for that design era ( the” Wild West” era, as I put it ): the inherent exploration, personality, and creativity that dominated many design portals and personal portfolio websites. Ultra-finely detailed pixel art UI, custom illustration, bespoke vector graphics, all underpinned by a strong design community.

The web design industry has experienced stagnation in recent years. I suspect there’s a strong chance you’ve seen a site whose structure looks something like this: a hero image / banner with text overlaid, perhaps with a lovely rotating carousel of images ( laying the snark on heavy there ), a call to action, and three columns of sub-content directly beneath. Perhaps there are selections that vaguely relate to their respective content in an icon library.

Design, as it’s applied to the digital landscape, is in dire need of thoughtful layout, typography, and visual engagement that goes hand-in-hand with all the modern considerations we now know are paramount: usability. accessibility Load times and bandwidth- sensitive content delivery. A user-friendly presentation that connects with people wherever they are. We must be mindful of, and respectful toward, those concerns—but not at the expense of creativity of visual communication or via replicating cookie-cutter layouts.

Pixel Issues

Websites during this period were often designed and built on Macs whose OS and desktops looked something like this. Although Mac OS 7.5 is available, 8 and 9 are not very different.

How could any single icon, at any point, stand out and grab my attention? This fascinated me. In this example, the user’s desktop is tidy, but think of a more realistic example with icon pandemonium. Or, let’s say an icon was a part of a larger system grouping ( fonts, extensions, control panels ): how did it maintain cohesion within a group as well?

These were 32 x 32 pixel creations, utilizing a 256-color palette, designed pixel-by-pixel as mini mosaics. This seemed to me to be the embodiment of digital visual communication under such absurd restrictions. And often, ridiculous restrictions can yield the purification of concept and theme.

So I started doing my homework and conducting research. I was a student of this new medium, hungry to dissect, process, discover, and make it my own.

I wanted to see how I could push the boundaries of a 32×32 pixel grid with that 256-color palette, expanding upon the idea of exploration. Those ridiculous constraints forced a clarity of concept and presentation that I found incredibly appealing. I was thrust into the digital gauntlet because of it. And so, in my dorm room into the wee hours of the morning, I toiled away, bringing conceptual sketches into mini mosaic fruition.

These are some of my creations that I made using ResEdit, the only program I had at the time, to create icons. ResEdit was a clunky, built-in Mac OS utility not really made for exactly what we were using it for. Research is at the center of all of this endeavor. Challenge. Problem-solving Again, these core connection-based values are agnostic of medium.

There’s one more design portal I want to talk about, which also serves as the second reason for my story to bring this all together.

This is the Kaliber 1000, or K10k, abbreviated. K10k was founded in 1998 by Michael Schmidt and Toke Nygaard, and was the design news portal on the web during this period. It was the place to be, my friend, with its pixel art-fueled presentation, ultra-focused care given to every aspect of every detail, and many of the more influential designers of the time who were invited to be news authors on the site. With respect where respect is due, GUI Galaxy’s concept was inspired by what these folks were doing.

For my part, the combination of my web design work and pixel art exploration began to get me some notoriety in the design scene. K10k eventually added me as one of their very select group of news writers to the website’s content.

Amongst my personal work and side projects —and now with this inclusion—in the design community, this put me on the map. Additionally, my design work has started to appear on other design news portals, as well as in publications abroad and domestically. With that degree of success while in my early twenties, something else happened:

I really changed into a colossal asshole in just about a year of school, not less. The press and the praise became what fulfilled me, and they went straight to my head. They inflated my ego. I actually felt somewhat superior to my fellow designers.

The victims? My design stagnated. My evolution has stagnated, as is my evolution.

I felt so supremely confident in my abilities that I effectively stopped researching and discovering. When I used to lead myself to iterate through concepts or sketches, I leaped right into Photoshop. I drew my inspiration from the smallest of sources ( and with blinders on ). My peers frequently vehemently disapproved of any criticism of my work. The most tragic loss: I had lost touch with my values.

Some of my friendships and blossoming professional relationships almost ended up being destroyed by my ego. I was toxic in talking about design and in collaboration. However, thankfully, those same friends gave me a priceless gift: sincerity. They called me out on my unhealthy behavior.

It was a gift I initially did not accept but which I, on the whole, was able to reflect on in depth. I was soon able to accept, and process, and course correct. Although the realization made me feel uneasy, the re-awakening was necessary. I let go of the “reward” of adulation and re-centered upon what stoked the fire for me in art school. Most importantly, I returned to my fundamental values.

Always Students

Following that temporary decline, my personal and professional design journey advanced. And I could self-reflect as I got older to facilitate further growth and course correction as needed.

Let’s take the Large Hadron Collider as an example. The LHC was designed” to help answer some of the fundamental open questions in physics, which concern the basic laws governing the interactions and forces among the elementary objects, the deep structure of space and time, and in particular the interrelation between quantum mechanics and general relativity”. Thank you, Wikipedia.

Around fifteen years ago, in one of my earlier professional roles, I designed the interface for the application that generated the LHC’s particle collision diagrams. These diagrams are often regarded as works of art by themselves because they depict what is actually happening inside the Collider during any given particle collision event.

Designing the interface for this application was a fascinating process for me, in that I worked with Fermilab physicists to understand what the application was trying to achieve, but also how the physicists themselves would be using it. In order to accomplish this, in this role,

I cut my teeth on usability testing, working with the Fermilab team to iterate and improve the interface. To me, their language and the topics they discussed seemed foreign. And by making myself humble and working under the mindset that I was but a student, I made myself available to be a part of their world to generate that vital connection.

I also had the opportunity to observe the physicists ‘ use of the tool in their own homes, on their own terminals, during my first ethnographic observation. For example, one takeaway was that due to the level of ambient light-driven contrast within the facility, the data columns ended up using white text on a dark gray background instead of black text-on-white. They were able to focus on their eyes while working during the day while poring over enormous amounts of data. And Fermilab and CERN are government entities with rigorous accessibility standards, so my knowledge in that realm also grew. Another crucial form of communication was the barrier-free design.

So to those core drivers of my visual problem-solving soul and ultimate fulfillment: discovery, exposure to new media, observation, human connection, and evolution. Before I entered those values, I had to check my ego before entering it, which opened the door to those values.

An evergreen willingness to listen, learn, understand, grow, evolve, and connect yields our best work. I want to pay attention to the words “grow” and “evolve” in that statement in particular. If we are always students of our craft, we are also continually making ourselves available to evolve. Yes, we have years of practical design experience under our belt. Or the focused lab sessions from a UX bootcamp. Or the monogrammed portfolio of our work. Or, ultimately, decades of a career behind us.

However, remember that “experience” does not equate to “expert.”

As soon as we close our minds via an inner monologue of’ knowing it all’ or branding ourselves a” #thoughtleader” on social media, the designer we are is our final form. There will never be a designer like us.

In yesterday’s data-driven environment, it’s becoming more and more common for a UX expert to be asked to create a personal digital experience, whether it’s a common website, user portal, or local application. However while there continues to be no lack of marketing buzz around personalization systems, we also have very few defined approaches for implementing personalized UX.

That’s where we come in. After completing tens of personalisation projects over the past few years, we gave ourselves a purpose: could you make a systematic personalization platform especially for UX practitioners? A human-centered personalization program can be established using the Personalization Pyramid, which covers information, classification, content delivery, and overall objectives. By using this strategy, you will be able to understand the core elements of a modern, UX-driven personalization system ( or at the very least know enough to get started ).

Getting Started

We’ll assume that you are already comfortable with the fundamentals of modern personalization for the purposes of this article. A nice guide can be found these: Website Personalization Planning. Although Graphic projects in this field can take a variety of forms, they frequently start from the same place.

Common scenarios for starting a personalisation task:

• Your business or client made a purchase to support personalization with a content management system ( CMS ), marketing automation platform ( MAP ), or other related technology.
• The CMO, CDO, or CIO has identified personalisation as a target
• Consumer data is unclear or disjointed.
• You are running some secluded targeting strategies or A/B tests
• On the personalisation approach, stakeholders disagree.
• Mandate of customer privacy rules ( e. g. GDPR ) requires revisiting existing user targeting practices

Regardless of where you begin, a powerful personalization system will require the same key building stones. These are the “levels” on the tower, as we’ve made them. Whether you are a UX artist, scholar, or planner, understanding the core components may help make your contribution effective.

From top to bottom, the amounts include:

North Star: What larger corporate goal is the personalisation initiative pursuing?
1. Objectives: What are the specific, tangible benefits of the system?
2. Touchpoints: Where will the personal service be provided?
3. Contexts and Campaigns: What personalization information does the person view?
4. What makes up a distinct, useable viewers according to consumer segments?
5. Actionable information: What dependable and credible information is captured by our professional platform to generate personalization?
6. What more extensive set of data is conceivable ( as of right now in our environment ) for personalization?

We’ll go through each of these amounts in turn. An associated deck of cards was created to demonstrate specific examples from each level to make this more meaningful. We’ve found them helpful in customisation brainstorming periods, and will include cases for you here.

Starting at the Top

The tower has the following elements:

North Star

Ultimately, you want a North Star in your personalization program, whether big or small. The North Star defines the (one ) overall mission of the personalization program. What do you hope to accomplish? North Stars cast a ghost. The larger the sun, the larger the dark. Example of North Starts may contain:

Function: Optimize based on fundamental customer inputs. Examples:” Raw” messages, basic search effects, system user settings and settings options, general flexibility, basic improvements
1. Feature: Self-contained customisation component. Examples:” Cooked” notifications, advanced optimizations ( geolocation ), basic dynamic messaging, customized modules, automations, recommenders
2. User knowledge: Personal consumer experiences across various user flows and interactions. Examples: Email campaigns, landing pages, advanced messaging ( i. e. C2C chat ) or conversational interfaces, larger user flows and content-intensive optimizations ( localization ).
3. Solution: Highly distinctive, personalized solution experiences. Example: Standalone, branded encounters with personalization at their base, like the “algotorial” songs by Spotify quite as Discover Weekly.

Goals

Personalization can aid in developing with client intentions, just like it is with any great UX design. Goals are the military and tangible metrics that may prove the entire program is effective. Start with your existing analytics and calculation system, as well as indicators you can benchmark against. In some cases, new targets may be ideal. The most important thing to keep in mind is that personalisation is never a desired outcome. It is a means to an end. Popular targets include:

• Conversion
• Time spent on work
• Net promoter score ( NPS)
• pleasure of the client

Touchpoints

Touchpoints are where the personalisation happens. This will be one of your biggest areas of responsibility as a UX custom. The connections available to you will depend on how your personalization and associated technology features are instrumented, and should be rooted in improving a person’s experience at a certain point in the trip. Touchpoints can be multi-device ( mobile, in-store, website ), as well as more specific ( web banner, web pop-up, etc. ). Several examples are given below:

Touchpoints at the channel level

• Email: Role
• Email: When is the email open?
• In-store display ( JSON endpoint )
• Native app
• Search

Wireframe-level Touchpoints

• Web overlay
• Web alert bar
• Web banner
• Web content block
• Web home page

If you’re designing for web interfaces, for example, you will likely need to include personalized “zones” in your wireframes. Based on our next step, contexts, and campaigns, the content for these can be presented programmatically in touchpoints.

Contexts and Campaigns

Once you’ve identified some touchpoints, you can decide what kind of personalized content a user will receive. Many personalization tools will refer to these as” campaigns” ( so, for example, a campaign on a web banner for new visitors to the website ). These will be displayed programmatically to specific user segments, as defined by user data. At this stage, we find it helpful to consider two separate models: a context model and a content model. The context helps you consider whether a user is engaging with the personalization process at the moment, such as when they are simply browsing the web or engaging in a deep dive. Think of it in terms of information retrieval behaviors. The content model can then guide you in deciding which personalization to use in terms of the context ( for instance, an” Enrich” campaign that features related articles might be a good substitute for extant content ).

Personalization Context Model:

1. Browse
2. Skim
3. Nudge
4. Feast

Personalization Content Model

1. Alert
2. Make Easier
3. Cross-Sell
4. Enrich

We’ve written a lot more in depth about each of these models elsewhere, so be sure to check out Colin’s Personalization Content Model and Jeff’s Personalization Context Model.

User Groups

User segments can be created prescriptively or adaptively, based on user research ( e. g. via rules and logic tied to set user behaviors or via A/B testing ). You will need to consider how to treat the logged-in visitor, the guest or returning visitor, for whom you may have a stateful cookie ( or another post-cookie identifier ), or the authenticated visitor at the least. Here are some examples from the personalization pyramid:

• Unknown
• Guest
• Authenticated
• Default
• Referred
• Role
• Cohort
• Unique Identification Number

Actionable information

Every organization with any digital presence has data. It’s important to inquire about how to use the data you can ethically collect on users, its inherent reliability and value, and how to use it ( sometimes referred to as “data activation” ). Fortunately, the tide is turning to first-party data: a recent study by Twilio estimates some 80 % of businesses are using at least some type of first-party data to personalize the customer experience.

First-party data has a number of benefits for the user experience, including being relatively simple to collect, more likely to be accurate, and less susceptible to the” creep factor” of third-party data. So a key part of your UX strategy should be to determine what the best form of data collection is on your audiences. Several examples are given below:

There is a progression of profiling when it comes to recognizing and making decisioning about different audiences and their signals. As user data volume and time and confidence increase, it varies more granularly to more precise constructs about ever-smaller cohorts of users.

While some combination of implicit / explicit data is generally a prerequisite for any implementation ( more commonly referred to as first party and third-party data ) ML efforts are typically not cost-effective directly out of the box. This is because optimization requires a strong data backbone and content repository. But these approaches should be considered as part of the larger roadmap and may indeed help accelerate the organization’s overall progress. At this point, you will typically work with key stakeholders and product owners to create a profiling model. The profiling model includes defining approach to configuring profiles, profile keys, profile cards and pattern cards. a scalable, multi-faceted approach to profiling.

Pulling it Together

The cards serve as the foundation for an inventory of sorts ( we provide blanks for you to tailor your own ), a set of potential levers and motivations for the kind of personalization activities you aspire to deliver, but they are more valuable when grouped together.

In assembling a card “hand”, one can begin to trace the entire trajectory from leadership focus down through a strategic and tactical execution. It serves as the foundation for the workshops that both co-authors have conducted to build a program backlog, which would make a good article topic.

In the meantime, what is important to note is that each colored class of card is helpful to survey in understanding the range of choices potentially at your disposal, it is threading through and making concrete decisions about for whom this decisioning will be made: where, when, and how.

Lay Down Your Cards

Any effective personalization strategy must take into account near, middle, and long-term objectives. Even with the leading CMS platforms like Sitecore and Adobe or the most exciting composable CMS DXP out there, there is simply no “easy button” wherein a personalization program can be stood up and immediately view meaningful results. Having said that, all personalization activities follow the same grammatical convention, just like every sentence contains both nouns and verbs. These cards attempt to map that territory.

The personalization space is true, between the dream of getting it right and the worry of it going wrong ( like when we encounter “persofails” similar to a company’s constant plea to regular people to purchase additional bathroom seats ). It’s an particularly confusing place to be a modern professional without a map, a map, or a strategy.

There are no Lonely Planet and some tour guides for those of you who want to personalize because successful personalization depends so much on each group’s talent, technology, and market position.

But you can ensure that your group has packed its carriers reasonably.

There’s a DIY method to increase your chances for achievement. You’ll at least at least disarm your boss ‘ irrational exuberance. Before the group you’ll need to properly plan.

We refer to it as prepersonalization.

Behind the audio

Take into account the DJ have on Spotify, which was introduced last year.

We’re used to seeing the polished final outcome of a personalization function. A personal have had to be developed, budgeted, and given priority before the year-end prize, the making-of-backstory, or the behind-the-scenes success chest. Before any customisation have goes live in your product or service, it lives amid a delay of valuable ideas for expressing consumer experiences more automatically.

How do you decide where to position customisation wagers? How do you design regular interactions that didn’t journey up users or—worse—breed mistrust? We’ve discovered that several budgeted programs foremost needed one or more workshops to join key stakeholders and domestic customers of the technology to justify their continuing investments. Make it matter.

We’ve closely observed the same evolution with our consumers, from major software to young companies. In our experience with working on small and large personalization work, a program’s best monitor record—and its capacity to weather tough questions, work steadily toward shared answers, and manage its design and engineering efforts—turns on how successfully these prepersonalization activities play out.

Effective workshops consistently save time, money, and overall well-being by separating successful future endeavors from unsuccessful ones.

A personalization practice involves a multiyear effort of testing and feature development. Your tech stack is not experiencing a switch-flip. It’s best managed as a backlog that often evolves through three steps:

1. customer experience optimization ( CXO, also known as A/B testing or experimentation )
2. always-on automations ( whether rules-based or machine-generated )
3. mature features or standalone product development ( like Spotify’s DJ experience )?

This is why we created our progressive personalization framework and why we’re field-testing an accompanying deck of cards: we believe that there’s a base grammar, a set of “nouns and verbs” that your organization can use to design experiences that are customized, personalized, or automated. These cards are not necessary for you. But we strongly recommend that you create something similar, whether that might be digital or physical.

Set the timer for the kitchen.

How long does it take to cook up a prepersonalization workshop? The activities we suggest including during the assessment can ( and frequently do ) last for weeks. For the core workshop, we recommend aiming for two to three days. Details on the essential first-day activities are included in a summary of our broad approach.

The full arc of the wider workshop is threefold:

Kickstart: This specifies the terms of your engagement as you concentrate on both your team’s and your team’s readiness and drive.
1. Plan your work: This is the heart of the card-based workshop activities where you specify a plan of attack and the scope of work.
2. Work your plan: This stage consists of making it possible for team members to individually pitch their own pilots that each include a proof-of-concept project, business case, and operating model.

Give yourself at least a day, split into two large time blocks, to power through a concentrated version of those first two phases.

Kickstart: Apt your appetite

We call the first lesson the “landscape of connected experience“. It looks at the possibilities for personalization in your organization. A connected experience, in our parlance, is any UX requiring the orchestration of multiple systems of record on the backend. A marketing-automation platform and a content-management system could be used together. It could be a digital-asset manager combined with a customer-data platform.

Give examples of connected experience interactions that you admire, find familiar, or even dislike, as examples of consumer and business-to-business examples. This should cover a representative range of personalization patterns, including automated app-based interactions ( such as onboarding sequences or wizards ), notifications, and recommenders. These are in the cards, which we have a catalog of. Here’s a list of 142 different interactions to jog your thinking.

It’s all about setting the tone. What are the possible paths for the practice in your organization? Here’s a long-form primer and a strategic framework for a broad perspective.

Assess each example that you discuss for its complexity and the level of effort that you estimate that it would take for your team to deliver that feature ( or something similar ). We break down connected experiences into five categories in our cards: functions, features, experiences, complete products, and portfolios. Size your own build here. This will help to draw attention to both the benefits of ongoing investment and the difference between what you currently offer and what you intend to deliver in the future.

Next, have your team plot each idea on the following 2×2 grid, which lays out the four enduring arguments for a personalized experience. This is crucial because it emphasizes how personalization can affect your own methods of working as well as your external customers. It’s also a reminder ( which is why we used the word argument earlier ) of the broader effort beyond these tactical interventions.

Each team member should decide where their focus should be placed for your product or service. Naturally, you can’t prioritize all of them. Here, the goal is to show how various departments may view their own benefits from the effort, which can vary from one department to the next. Documenting your desired outcomes lets you know how the team internally aligns across representatives from different departments or functional areas.

The third and final kickstart activity is about filling in the personalization gap. Is your customer journey well documented? Will data and privacy protection be a significant challenge? Do you have content metadata needs that you have to address? It’s just a matter of acknowledging the magnitude of that need and finding a solution ( we’re fairly certain that you do ). In our cards, we’ve noted a number of program risks, including common team dispositions. For instance, our Detractor card lists six intractable behaviors that prevent progress.

Effectively collaborating and managing expectations is critical to your success. Consider the potential obstacles to your upcoming progress. Press the participants to name specific steps to overcome or mitigate those barriers in your organization. According to research, personalization initiatives face a number of common obstacles.

At this point, you’ve hopefully discussed sample interactions, emphasized a key area of benefit, and flagged key gaps? You’re all set to go on, good.

Hit that test kitchen

Next, let’s take a look at what you’ll need to create personalization recipes. Personalization engines, which are robust software suites for automating and expressing dynamic content, can intimidate new customers. They give you a variety of options for how your organization can conduct its activities because of their broad and potent capabilities. This presents the question: Where do you begin when you’re configuring a connected experience?

The key here is to avoid treating the installed software ( as one of our client executives humorously put it ) like some sort of dream kitchen. These software engines are more like test kitchens where your team can begin devising, tasting, and refining the snacks and meals that will become a part of your personalization program’s regularly evolving menu.

Over the course of the workshop, the ultimate menu of the prioritized backlog will come together. And creating “dishes” is the way that you’ll have individual team stakeholders construct personalized interactions that serve their needs or the needs of others.

Recipes have ingredients in them, and those recipes have ingredients.

Verify your ingredients

Like a good product manager, you’ll make sure you have everything ready to cook up your desired interaction ( or figure out what needs to be added to your pantry ) and that you validate with the right stakeholders present. These ingredients include the audience that you’re targeting, content and design elements, the context for the interaction, and your measure for how it’ll come together.

This is not just about identifying needs. Documenting your personalizations as a series of if-then statements lets the team:

1. compare findings to a common method for developing features, similar to how artists paint with the same color palette,
2. specify a consistent set of interactions that users find uniform or familiar,
3. and establish parity between all important performance indicators and performance metrics.

This helps you streamline your designs and your technical efforts while you deliver a shared palette of core motifs of your personalized or automated experience.

Create a recipe.

What ingredients are important to you? Consider a who-what-when-why construct:

• Who are your key audience segments or groups?
• What content, what design elements, and under what circumstances will you give them?
• And for which business and user benefits?

Five years ago, we created these cards and card categories. We regularly play-test their fit with conference audiences and clients. And there are still fresh possibilities. But they all follow an underlying who-what-when-why logic.

In the cards in the accompanying photo below, you can typically follow along with right to left in three examples of subscription-based reading apps.

1. Nurture personalization: When a guest or an unknown visitor interacts with a product title, a banner or alert bar appears that makes it easier for them to encounter a related title they may want to read, saving them time.
2. Welcome automation: An email is sent when a new user registers to highlight the breadth of the content catalog and convert them to happy subscribers.
3. Winback automation: Before their subscription lapses or after a recent failed renewal, a user is sent an email that gives them a promotional offer to suggest that they reconsider renewing or to remind them to renew.

We’ve also found that sometimes this process comes together more effectively by cocreating the recipes themselves, so a good preworkshop activity might be to think about what these cards might be for your organization. Start with a set of blank cards, and begin labeling and grouping them through the design process, eventually distilling them to a refined subset of highly useful candidate cards.

The later stages of the workshop could be characterized as moving from focusing on a cookbook to a more nuanced customer-journey mapping. Individual” cooks” will pitch their recipes to the team, using a common jobs-to-be-done format so that measurability and results are baked in, and from there, the resulting collection will be prioritized for finished design and delivery to production.

Architecture must be improved to produce better kitchens.

Simplifying a customer experience is a complicated effort for those who are inside delivering it. Avoid those who make up their mind. With that being said,” Complicated problems can be hard to solve, but they are addressable with rules and recipes“.

A team overfitting: they aren’t designing with their best data, is what causes personalization to become a laugh line. Like a sparse pantry, every organization has metadata debt to go along with its technical debt, and this creates a drag on personalization effectiveness. For instance, your AI’s output quality is in fact impacted by your IA. Spotify’s poster-child prowess today was unfathomable before they acquired a seemingly modest metadata startup that now powers its underlying information architecture.

You can’t stand the heat, in fact…

Personalization technology opens a doorway into a confounding ocean of possible designs. Only a disciplined and highly collaborative approach will produce the necessary concentration and intention for success. So banish the dream kitchen. Instead, head to the test kitchen to burn off the fantastical ideas that the doers in your organization have in store for time, to preserve job satisfaction and security, and to avoid unnecessary distractions. There are meals to serve and mouths to feed.

This framework of the workshop gives you a strong chance at long-term success as well as solid ground. Wiring up your information layer isn’t an overnight affair. However, you’ll have solid ground for success if you use the same cookbook and the same recipes. We designed these activities to make your organization’s needs concrete and clear, long before the hazards pile up.

Although there are associated costs associated with purchasing this kind of technology and product design, your time well spent is on sizing up and confronting your unique situation and digital skills. Don’t squander it. The pudding is the proof, as they say.