Category: Blog

Some wealthy runners had come to the conclusion that it was impossible to run a mile in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

But Roger Bannister surprised people on May 6, 1956. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world today knew that the four-minute hour was possible because of this change in the standard. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Finally, in the same race, three athletes all managed to cross the four-minute challenge. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We can do a lot more with what we think is possible, and we can only do it if we see that someone else has already done it. As with people running speed, there are also difficult limits on how a website can accomplish.

Establishing requirements for a green website

The key environmental performance indicators for the majority of major industries are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. However, we aren’t held to any specific environmental standards in the world of websites and apps, and we only recently have access to the tools and strategies we need to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the amount of CO₂ that a website item produces. We can’t measure the pollutants coming out of the exhaust valves on our devices. Our websites ‘ emissions are far away, out of mind, and out of sight when fuel and oil are burned in power plants. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon emissions, then we need to get what we can estimate. The following are the main elements that could be used as coal pollution gauges:

1. Transfer of data
2. Coal content of light

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a wonderful example of how much energy is consumed and how much carbon is released. As a rule of thumb, the more files transferred, the more electricity used in the data center, telecoms systems, and end users products.

The most accurate way to calculate data transfer for a single visit for web pages is to measure the page weight, which is the first time a user visits the page in kilobytes. It’s fairly easy to measure using the developer tools in any modern web browser. Statistics for the total data transfer of any web application are frequently included in your web hosting account ( Fig. 2.1 ).

The nice thing about page weight as a metric is that it allows us to compare the efficiency of web pages on a level playing field without confusing the issue with constantly changing traffic volumes.

A large scope is required to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for the majority of this data transfer, making them the single biggest contributor to carbon emissions on a typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While the majority of technologies, including the web’s underlying technology like data centers and transmission networks, become more and more energy-efficient, websites themselves become less effective as time goes on.

You might be aware of the project team’s focus on creating faster user experiences using the concept of performance budgeting. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than hazy ideas, much like speed limits while driving. As a result, the goal should always be to stay within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use competitor page weight to compare the new website to the old one. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

We could start looking at the transferability of our web pages for repeat visitors if we want to take it one step further. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, visitors who load the same page more frequently will likely have a high percentage of the files cached in their browser, which means they won’t need to move all the files on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. Moving beyond the first visit and measuring page weight budgets for scenarios beyond this level of detail can help us learn even more about how to optimize efficiency for users who regularly visit our pages.

Page weight budgets are easy to track throughout a design and development process. Although they don’t directly disclose their data on energy consumption and carbon emissions, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of reducing web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Coal content of light

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” (gCO₂/k Wh ) is used to describe how much carbon dioxide is produced for each kilowatt-hour of electricity ). This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, where different levels of carbon intensity are combined with energy from a variety of sources. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will result in significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

Having said that, we don’t want to locate our servers too far away from our users; however, it takes energy to transmit data through the telecom’s networks, and the more energy is used, the further the data travels. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and measure the distance between that location and the data center that our hosting company uses as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how hosting it somewhere in North America, ideally on the West Coast, would significantly lessen the distance and the amount of energy required to transmit the data. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. The method my team developed converts the amount of electricity transferred when loading a web page into a CO₂ figure ( Fig. ₂.4), and then converts that data into a figure for the tool. It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to take it one step further and tailor the data more precisely to the unique aspects of your project.

With the ability to calculate carbon emissions for our projects, we could even set up carbon budgets as well. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds an air of abstraction, carbon budgets do focus our minds on the main issue we’re trying to reduce, which also supports the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational burden is increasingly shifting from the data center to the users ‘ devices, whether they are smart TVs, tablets, laptops, phones, tablets, laptops, or other front-end web technologies. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React allow us to create applications where the” thinking” process is performed either partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more computation in a web browser requires more energy to be used by the user’s devices. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally make them use older, slower devices and make their phones and laptops ‘ batteries discharge more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. This not only harms the environment, but it places a disproportionate financial burden on the poorest members of society.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the Safari browser’s developer console ( Fig. 2.5 ) is one of the tools we currently use.

You know when your computer’s cooling fans start spinning so frantically that you suspect it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating and shows the percentage of CPU used and how long the CPU used when loading the web page last. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

CSS is all about design containers. In fact, the whole website is made of containers, from the website viewport to components on a webpage. However, every now and then a new element emerges that prompts us to reevaluate our design philosophy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. Additionally, dual-screen or portable devices force us to consider how to make the most of the available room in various device configurations.

The design of products has become more challenging and interesting as a result of new changes to the web platform. They’re wonderful opportunities for us to break out of our triangular containers.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Democratic Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they are flexible, linkable, and stable, just like websites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it can be challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What a standard desktops PWA app looks like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color house ), but that’s about it.

What if we could consider other ways and reclaim the whole window in the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

The Window Controls Overlay offers precisely this. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and glass controls

Let’s get started with an explanation of the subject bar and screen controls.

The title bar is the place displayed at the top of an game windows, which frequently contains the phone’s name. The controls are displayed at the top of an app’s window, along with the buttons that enable it to minimize, maximize, near, and close it.

Window Controls Overlay removes the natural barrier of the name bar and windows controls areas. The title bar and glass control buttons can be overlayed on top of the user’s internet material, allowing it to free up the entire height of the game window.

If you are reading this article on a desktop computer, get a quick glance at another software. Odds are they’re currently doing something similar to this. In fact, the internet browser you are using uses the major area to show tabs.

Spotify’s application window’s top edge is where the album artwork appears.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience across a variety of platforms without having a negative impact on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using only CSS and a single HTML element in this straightforward CSS playground.

The app has two pages. The first lists your existing CSS designs:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on the desktop because I added a straightforward web manifest and service worker. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area extended to the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

enabling overlay for window control

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been implemented in Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of window controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing we need to change is this manifest change, which will make the title bar disappear and convert the window controls into an overlay.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

What the current state of the app is:

Our logo, search field, and NEW button are now partially covered by the window controls, but the title bar has been removed, which is what we wanted. Our layout now begins at the top of the window.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been introduced along with the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. We’ll position our header, which includes the logo, search bar, and NEW button, using two of the variables in our case.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The interface resembles a native app much more.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are a few ways to define it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in various ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

What will we do with this function:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can use the Window Controls Overlay feature to move the window, but this area becomes limited to where the control buttons are, and they must carefully aim between these buttons to move the window. However, the title bar offers a sizable area for users to click and drag.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to make any feature of the app a drag target for the window:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. So let’s take a different strategy. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be with the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. In our situation, there wouldn’t be enough room for the search field, logo, and button to fit because the user made the window very narrow. We would want to push them a little lower.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

The API offers three intriguing features:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangelets us know when something changes in size or visibility.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• We can see the title bar area across different operating systems, which is great because the window controls ‘ size is different on Mac and Windows. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can use the above CSS code to move our header down and move the thumbnails down in accordance with this.

Thirty pixels of exciting design opportunities

We were able to turn our simple demo app into something that felt so much more integrated on desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room and presents challenges when using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. New features are added to the web platform to make it easier for web authors to integrate more and more fully with those devices. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. We can now think beyond the rectangular box when building for the web.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

If you have the chance to try the Window Controls Overlay feature and have feedback on it, you can open issues in the spec’s repository. It’s still early in the development of this feature, and you can help make it even better. You can also look at this demo app and the source code, the feature’s existing documentation, or the feature’s existing documentation.

Here’s the key. You must engage stakeholders to determine high-risk conclusions and invisible complexity, so that they can become just as motivated as you are to receive responses from users. Essentially, you need to make them think it’s their plan.

By bringing the group up around two straightforward issues, I’ll show you how to collectively introduce alignment and cracks in the team’s shared knowledge.

1. What are the items?
2. What are the interactions between those things?

A cross between camera design and analysis

These two issues correlate to the first two methods of the ORCA approach, which may be your new best friend when it comes to reducing speculation. What’s ORCA, then? Glad you asked.

ORCA stands for Things, Relationships, CTAs, and Values, and it outlines a process for creating good object-oriented user experience. My design idea is oriented UX. ORCA is an iterative strategy for synthesizing person study into an elegant fundamental foundation to help monitor and conversation design. My work as a UX designer has become more creative, productive, successful, fun, proper, and meaningful thanks to OOUX and ORCA.

The ORCA approach has four incremental shells and a staggering fifteen steps. In each round we get more precision on our System, Rupees, Computer, and As.

I occasionally refer to ORCA as a “garbage in, garbage out” procedure. To ensure that the testable prototype produced in the final round actually tests well, the process needs to be fed by good research. However, the beginning of the ORCA process serves another purpose: it helps you sell the need for research if you don’t have a ton of research.

In other words, the ORCA process serves as a gauntlet between research and design. You can gracefully ride the killer whale from research to design with good research. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting back in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It begins to reveal what this timeless comic so skillfully demonstrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. Every decision-maker is confident in their own mental picture, which is another reason why we frequently can’t sell research.

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

However, how we go about doing this is crucial. However much we might want to, we can’t just tell everyone,” YOU ARE WRONG”! Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders accept responsibility for their beliefs and understanding gaps, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Let’s say you have doctors on your staff. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying:” We need to understand doctors better! What bothers them the most? How do they use the current app”? Here’s the issue with that, though. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This conversation is more similar to what you need to facilitate. Let’s listen in:

” Wait a sec, how frequently do doctors share patients?” Does a patient in this system have primary and secondary doctors”?

” Can a patient even have more than one primary doctor”?

Is it a “primary doctor” or “primary caregiver” ?Can’t that position be considered a nurse practitioner?

” No, caregivers are something else… That’s the patient’s family contacts, right”?

Are caregivers included in this redesign, then?

” Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment”?

We are currently traveling somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? Here, the diabolical goal is to diplomatically and diplomatically shake their confidence.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And most likely as a result of this, the software product will be more confusing, more complicated, and less intuitive.

The two questions

But how do we approach these types of contentious inquiries diplomatically, effectively, collaboratively, and reliably?

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the items?
2. What are the interactions between those things?

In practice, getting to these answers is easier said than done. I’m going to demonstrate how these two straightforward questions can serve as the starting point for an Object Definition Workshop. During this workshop, these” seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Noun foraging prep work

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders ( and entire cross-functional team, hopefully ). But first, you need to do some prep work.

In essence, look for nouns that are specific to the subject matter or industry of your project and use at least a few sources. I call this noun foraging.

Just a few excellent noun foraging sources can be found here:

• the product’s marketing site
• the product’s competitors ‘ marketing sites ( competitive analysis, anyone? )
• the already-existing product ( check the labels! )!
• user interview transcripts
• notes from interviews with stakeholders or vision documents from stakeholders are both important.

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. Use those if all you have is a marketing website, some screenshots of the current legacy system, and access to customer service chat logs.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them ( preferably on blue sticky notes if you’ll be creating an object map later! …

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Consider, for instance, a library app. Is “book” an object?

Can you think of a few attributes for this potential object? Title, author, publish date … Yep, it has structure. Check!

What are some instances of this potential “book” object? Can you name a few? Check out The Alchemist, Ready Player One, and Everybody Poops!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library … Check, check, check!

Concentrate on capturing the nouns with SIP as you go noun foraging. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is using your dropdown to play in your digital space! They are coming for the VALUABLE THINGS and what they can do with them. We are attempting to identify those things or objects.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

I’d like to take a look at my own email client, which turns out to be Gmail. I’d then look at Outlook and the new HEY email. I’d check out Hotmail, Yahoo, and even Slack and Basecamp and other’email replacers’. I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

( Before moving on, feel free to go noun foraging for this fictitious product as well, and then scroll down to see how closely our lists correspond. Just don’t get lost in your own emails! Rejoice back to me!

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact organizations
• attachment
• Google doc file / other integrated file
• newsletter? ( HEY views this in a different way )
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. It might be a client or automation in our email example. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: Here are some real nouns that I needed my stakeholders to understand during my own past project work:

• Record Locator
• Home Incentive
• Augmented Line Item
• Curriculum-Based Measurement Probe

A list of nouns that represent potential objects and a short list of nouns that need to be further defined are really all you need to prepare for the workshop session.

Facilitate an Object Definition Workshop

Noun foraging can be used as a starting point for your workshop; this can be done in concert. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Your friend here is affinity mapping!

If your team is short on time and might be reluctant to do this kind of grunt work ( which is usually the case ) do your own noun foraging beforehand, but be prepared to show your work. I enjoy showing screenshots of documents and screens with all the highlighted nouns. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. We’ll keep that a secret; you just need to let them know that you‘re looking for gaps in the team’s understanding so that you can demonstrate the need for more user research. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers.

Let the whack-a-mole question then start.

1. What is this thing?

Want some genuine fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Have everyone then show their cards at once, and see if there are any variations (you will ). This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty sets in, quietly ( but clearly ) begin an “open questions” parking lot. � �

Here’s a fantastic follow-up after definitions solidify:

2. Do our users know what these things are? What do users refer to this as?

Stakeholder 1: They probably call email clients “apps”. I’m not certain, though.

Stakeholder 2: Automations are often called “workflows”, I think. Or, maybe users think workflows are something different.

Ask the group to decide whether to use only that term in the near future if it becomes more user-friendly. This way, the team can better align to the users ‘ language and mindset.

Okay, let’s get to the next part.

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Are these the same thing? Or are these different? If they are different, how are they different?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Absolutely.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images.

Continue to expand your expanding glossary of terms. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Are saved responses and templates in any way connected to each other?

Stakeholder 3: Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? When a user is creating a saved response, does that occur? Or when they apply the saved response to an email? How does that actually function?

Listen. Capture uncertainty. When the number of “open questions” reaches a critical mass, pause to begin asking questions of groups or individuals. Some questions might be for the dev team ( hopefully at least one developer is in the room with you ). One question might be specific for someone who was unable to attend the workshop. And many questions will need to be labeled “user”.

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next query makes the team’s attention narrower so that it can focus on what your users are most interested in. You can simply ask,” Are saved responses in scope for our first release”?, but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to order these items either in small breakout groups or separately from the most important. Then, like you did with the definitions, have everyone reveal their sort order at once. Unsurprisingly, it’s not unusual for the VP to place something like” saved responses” at the top of the list while everyone else places it at the bottom. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. The three groups ‘ wildly different sort orders were displayed on the whiteboard.

The CEO sat back, examined it, and said,” This is why we haven’t been able to move forward in two years.”

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects ‘ relationships

We’ve already done this before figuring out what two things might be different, but this time, we’ll ask the team about every possible connection. For each object, ask how it relates to all the other objects. In what ways are the objects connected? Pull out your dependable boxes and arrows technique to see all the connections. Here, we are connecting our objects with verbs. I prefer to use simple statements like “has a” and “has many.”

This system modeling activity brings up all sorts of new questions:

• Can an attachment in a saved response be present?
• Can a saved response use a template? If so, can the user override the template if an email uses a saved response with a template?
• Do users want to see all the emails they sent that included a particular attachment? For example,” show me all the emails I sent with ProfessionalImage. attached .jpg I’ve changed my professional photo and I want to alert everyone to update it”.

Effective responses might come directly from the workshop participants. Great! Capture that new shared understanding. However, keep adding questions to your expanding parking lot as uncertainty arises.

Light the fuse

You’ve set up the floodgates strategically so that the explosives can be seen everywhere. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Have the group reflect on the list of open questions before the workshop ends. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

Your final step is now. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out”?

With this approach, we are making our decision-makers fight for user research because they themselves define questions as high-risk. Sorry, not sorry.

Your moment of truth is right now. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions.

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions don’t force the user to choose any default responses. They should be open-ended.

Final words: Hold the screen design!

Seriously, if at all possible, never design screens again without first addressing the fundamental inquiries: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and ( it almost feels like a bonus at this point! ) users will be more receptive to what you put out into the world.

I sincerely hope this will give you the time and money to spend talking to your users and getting a clear understanding of what you are designing before you begin creating screens. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots.

Wish you the best of luck! Now go sell research!

The mobile-first style approach is fantastic because it concentrates on what is most important to the consumer, it’s well-practiced, and it’s a well-known layout design for years. But developing your CSS mobile-first should also be wonderful, too…right?

Well, not necessarily. Classic mobile-first CSS development is based on the principle of overwriting style declarations: you begin your CSS with default style declarations, and overwrite and/or add new styles as you add breakpoints with min-width media queries for larger viewports (for a good overview see “What is Mobile First CSS and Why Does It Rock?”). But all those exceptions create complexity and inefficiency, which in turn can lead to an increased testing effort and a code base that’s harder to maintain. Admit it—how many of us willingly want that?

Mobile-first CSS may yet be the best option for your own projects, but you need to first determine whether it is appropriate in light of the physical design and user interactions you’re creating. To help you get started, here’s how I go about tackling the elements you need to watch for, and I’ll discuss some alternative remedies if mobile-first doesn’t seem to fit your job.

benefits of mobile-first technology

Some of the benefits of mobile-first CSS growth, and why it’s been the de facto growth practice for so long, make a lot of sense:

Development order. A good development hierarchy is something you can definitely get from mobile-first; you just get developing while paying attention to the mobile view.

tested and verified. It’s a tried and tested technique that’s worked for years for a cause: it solves a problem actually also.

prioritizes the portable watch. The smart see is the simplest and arguably the most significant because it covers all of the crucial consumer journeys and frequently accounts for more user visits ( depending on the project ) in terms of complexity.

Prevents desktop-centric growth. It can be tempting to first focus on the desktop perspective because desktop computers are used for growth. However, considering mobile from the beginning prevents us from getting stuck eventually; no one wants to spend their day getting a site that is focused on desktops to work on mobile devices!

Drawbacks of mobile-first

Model declarations can be set at higher breakpoints and therefore overwritten at higher breakpoints:

more complicated stuff. The farther up the target order you go, the more unnecessary password you inherit from lower thresholds.

higher CSS precision A school name declaration with a restored default value for a style has a higher specificity today. This can be a pain on big projects when you want to preserve the CSS candidates as simple as possible.

Takes more analysis analysis. All higher thresholds must be regression tested if CSS changes at lower views ( such as adding a new fashion ).

The browser can’t prioritize CSS downloads. At wider breakpoints, classic mobile-first min-width media queries don’t leverage the browser’s capability to download CSS files in priority order.

Property price issue: override

There is nothing inherently wrong with overwriting beliefs, CSS was designed to do just that. Even so, inheriting wrong values can be laborious and ineffective. When you have to replace styles to restore them to their defaults, which may cause issues after, especially if you are using a combination of bespoke CSS and power classes, it can also lead to more fashion precision. We won’t be able to use a power course for a design that has been restore with a higher precision.

With this in mind, I’m developing CSS with a focus on the default values much more these days. Since there’s no specific order, and no chains of specific values to keep track of, this frees me to develop breakpoints simultaneously. I concentrate on finding common styles and isolating the specific exceptions in closed media query ranges (that is, any range with a max-width set). 

As you can view each target as a blank slate, this technique opens up some opportunities. It’s acceptable and can be coded in the default style plate if a product’s layout appears to be based on Flexbox at all thresholds. But if it looks like Grid would be much better for large panels and Flexbox for portable, these can both be done entirely freely when the CSS is put into finished media keyword ranges. Additionally, developing simultaneously requires you to have a thorough understanding of any given component in all breakpoints right away. This can help identify issues with the design more quickly in the development process. We don’t want to get stuck down a rabbit hole building a complex component for mobile, and then get the designs for desktop and find they are equally complex and incompatible with the HTML we created for the mobile view!

Although this strategy won’t work for everyone, I urge you to try it. There are plenty of resources available to support concurrent development, including Responsively App, Blisk, and many others.

Having said that, I don’t feel the order itself is particularly relevant. If you like to work on one device at a time, are comfortable with focusing on the mobile view, and are familiar with the requirements for other breakpoints, then you should definitely follow the classic development order. The key is to find common styles and exceptions so that you can include them in the appropriate stylesheet, which is a manual tree-shaking procedure! Personally, I find this a little easier when working on a component across breakpoints, but that’s by no means a requirement.

Closed media query ranges are used in real life.

We overwrite the styles in the traditional mobile-first CSS, but media query ranges can be used to prevent this. To illustrate the difference ( I’m using SCSS for brevity ), let’s assume there are three visual designs:

• smaller than 768
• from 768 to less than 1024
• 1024 and anything larger

Take a simple example where a block-level element has a default padding of “20px,” which is overwritten at tablet to be “40px” and set back to “20px” on desktop.

.my-block { padding: 20px; @media (min-width: 768px) { padding: 40px; } @media (min-width: 1024px) { padding: 20px; }}

.my-block { padding: 20px; @media (min-width: 768px) and (max-width: 1023.98px) { padding: 40px; }}

The subtle difference is that the mobile-first example sets the default padding to “20px” and then overwrites it at each breakpoint, setting it three times in total. In contrast, the second example sets the default padding to “20px” and only overrides it at the relevant breakpoint where it isn’t the default value (in this instance, tablet is the exception).

The goal is to: 

• Only set styles when needed. 
• Not set them with the expectation of overwriting them later on, again and again. 

To this end, closed media query ranges are our best friend. If we need to make a change to any given view, we make it in the CSS media query range that applies to the specific breakpoint. We’ll be much less likely to introduce unwanted alterations, and our regression testing only needs to focus on the breakpoint we have actually edited. 

Taking the above example, if we find that .my-block spacing on desktop is already accounted for by the margin at that breakpoint, and since we want to remove the padding altogether, we could do this by setting the mobile padding in a closed media query range.

.my-block {  @media (max-width: 767.98px) {    padding: 20px;  }  @media (min-width: 768px) and (max-width: 1023.98px) {    padding: 40px;  }}

The browser default padding for our block is “0,” so instead of adding a desktop media query and using unset or “0” for the padding value (which we would need with mobile-first), we can wrap the mobile padding in a closed media query (since it is now also an exception) so it won’t get picked up at wider breakpoints. At the desktop breakpoint, we won’t need to set any padding style, as we want the browser default value.

Bundling versus separating the CSS

Due to the browser's concurrent request limit (typically around six ), it was crucial back then to keep the number of requests to a minimum. In consequence, using image sprites and CSS bundling was the norm, with all the CSS being downloaded as a single stylesheet with the highest priority.

With HTTP/2 and HTTP/3 now on the scene, the number of requests is no longer the big deal it used to be. This enables us to use a media query to break CSS into multiple files. The obvious benefit of this is that the browser can now request the CSS it currently requires with a higher priority than the CSS it doesn't. This is more performant and can reduce the overall time page rendering is blocked.

What version of HTTP do you use?

Go to your website and open the dev tools for your browser to find out which version of HTTP you're using. Next, select the Network tab and make sure the Protocol column is visible. If "h2" is included in the protocol list, that indicates that HTTP/2 is being used.

Note: To check the Protocol column in your browser's dev tools, right-click any column header ( such as Name ), go to the Network tab, reload your page, and then check the Protocol column.

Also, if your website is still using HTTP/1... WHY?! What are you waiting for? Excellent user support exists for HTTP/2.

splitting the CSS

Separating the CSS into individual files is a worthwhile task. Linking the separate CSS files using the relevant media attribute allows the browser to identify which files are needed immediately (because they’re render-blocking) and which can be deferred. Based on this, it allocates each file an appropriate priority.

In the following example of a website visited on a mobile breakpoint, we can see the mobile and default CSS are loaded with" Highest" priority, as they are currently needed to render the page. In case they are needed later, the remaining CSS files ( print, tablet, and desktop ) are still being downloaded with" Lowest" priority, though they are still needed.

Before rendering can begin, the browser will need to download and parse the CSS file when using bundled CSS.

While, as noted, with the CSS separated into different files linked and marked up with the relevant media attribute, the browser can prioritize the files it currently needs. Using closed media query ranges allows the browser to do this at all widths, as opposed to classic mobile-first min-width queries, where the desktop browser would have to download all the CSS with Highest priority. We can’t assume that desktop users always have a fast connection. For instance, in many rural areas, internet connection speeds are still slow. 

Depending on project requirements, the media queries and the number of separate CSS files will vary from project to project, but the example below might look similar.

Depending on the project’s deployment strategy, a change to one file (mobile.css, for example) would only require the QA team to regression test on devices in that specific media query range. Compare that to the prospect of deploying the single bundled site.css file, an approach that would normally trigger a full regression test.

Moving on

The adoption of mobile-first CSS was a significant development milestone because it allowed front-end developers to concentrate on mobile web applications rather than creating websites for desktop use and attempting to convert them to work on other devices.

I don't think anyone wants to return to that development model again, but it's important we don't lose sight of the issue it highlighted: that things can easily get convoluted and less efficient if we prioritize one particular device—any device—over others. For this reason, it seems natural to concentrate on the CSS in its own right, always mindful of what is the default setting and what constitutes an exception, as a result. I've started to notice subtle simplifications in both the CSS of my own and that of other developers, and that testing and maintenance work is also a little more effective and streamlined.

In general, simplifying CSS rule creation whenever we can is ultimately a cleaner approach than going around in circles of overrides. However, the project must fit the methodology you choose. Mobile-first may turn out to be the best option for the situation at hand, but first you need to fully comprehend the trade-offs you're entering.

However, we’re still very far from this perfect.

At the time, I didn’t realize yet how to functionally incorporate morality. Yes, I did discover some tools in other projects that had worked well for me, such as using checklists, notion monitoring, and “dark truth” sessions. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I made a deeper investigation into the causes of business failure that prevent us from practicing social design every day. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine morality. And it’s unexpectedly easy! However, we must first move out to understand what we’re going through.

Control the structure

Unfortunately, we’re confined to a capitalist system that encourages consumerism and inequality and is obsessed with the irrationality of infinite expansion. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Our well-meaning human-centered thinking has been transformed into a powerful machine that encourages ever-higher levels of consumption over the past ten years due to these objectives. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. We’re a part of the problem, despite our best efforts and the fact that we like to claim that we provide solutions for people.

What can we do to alter this?

We may begin by acting on the appropriate level of the system. A system intellectual named Donna H. Meadows after outlined ways to influence a system in order of success. When you apply these to style, you get:

You can change figures like functionality results or the number of layout critiques at the lowest level of effectiveness. But none of that may change the direction of a business.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• Instead of focusing on feedback loops like control power, employee reputation, or design-system investments, a company can become more effective at achieving its goals. But that doesn’t alter the goals themselves, which means that the business will also work against your ethical-design ideals.
• The change of moral methods, toolkits, articles, conferences, workshops, and so on is what most ethical-design initiatives are currently focused on at the next stage, information flows. This is also where social style has remained largely theoretical. We’ve been focusing on the wrong level of the system all this day.
• Consider rules, for instance; they consistently surpass information. There can be commonly accepted guidelines, such as how fund works, or a sprint group’s concept of done. However, illegal laws intended to maintain income, frequently revealed through comments like” the customer didn’t ask for it” or “don’t make it too big” can smother social style.
• Changing the rules without holding formal power is extremely difficult. That’s why the next stage is thus important: self-organization. Research, bottom-up initiatives, interest projects, self-steering teams, and other such self-organization techniques all contribute to a company’s resilience and creativity. It’s precisely this diversity of viewpoints that’s needed to functionally address major structural issues like materialism, money injustice, and climate change.
• But goals and measures are even more powerful than self-organization. Our businesses want to make more cash, which means that everything and everyone in the business does their best to… make the company more money. And when I realized that profit is nothing more than a measurement, I understood how important a very particular, defined measurement may be toward pushing a company in a specific direction.

What is the conclusion? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

However, we all know that the three dimensions are not equally important: viability is ultimately what determines whether a product will become operational. So a more realistic representation might look like this:

The means are feasibility and desire, and viability is the aim. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. Therefore, both feasibility and viability are important factors in the company’s efforts to accomplish what they stated. It makes intuitive sense: to achieve most anything, you need resources, people, and money. Fun fact: the Italian language does not distinguish between viability and feasibility; both are merely fattibilità.

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. When it comes to a product’s desirability goals, such as user satisfaction or conversion, don’t take into account whether it is good for people. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They are ineffective for maintaining a healthy relationship with nature.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. There are many variations of these models, some calling the fourth dimension accountability, integrity, or responsibility. What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There is no one way to accomplish this because it greatly depends on your country’s culture, values, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

pursue equity, sustainability, and well-being.

We created objectives that address design’s effect on three levels: individual, societal, and global.

An individual’s goal on the individual level clarifies what success entails in contrast to the typical user-centric focus on usability and satisfaction, taking into account factors like how much time and effort are required of users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are non-misleading, transparent, and calm. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

We must consider our impact beyond the user, widening our focus to the economy, communities, and other indirect stakeholders, as a result of establishing an objective on the societal level. We called this objective equity:

We create products and services that have a positive social impact. We think of racial justice, inclusiveness and diversity of people as teams, users, and customer segments as indicators of economic equality. We listen to local culture, communities, and those we affect.

Finally, the global goal of maintaining harmony with humanity’s only home is the one we have. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our solutions promote the circular economy by generating value from waste, reusing products, and giving priority to sustainable choices. We deliver functionality instead of ownership, and we limit energy use.

In essence, ethical design ( to us ) meant achieving the wellbeing of each user and an equitable value distribution within society through a design that can sustain our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

However, it is still necessary to define these goals. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

In this overview, you can use examples of metrics to measure your progress toward equity, well-being, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. Donella Meadows once provided this illustration:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not lead to national security.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if we instead used metrics for ( digital ) well-being, like ( reduced ) screen time or software energy consumption, to measure success?

There’s another important message here. If we set an objective to create a calm interface, we might still end up with a screen that makes people anxious, even if we set the wrong metric for calmness, such as the number of interface elements. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. Once you complete the task of selecting metrics for our goals, you are forced to consider what success looks like in terms of words and how you can demonstrate that you’ve accomplished your ethical goals. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The response to this query provides a lot of insight and clarity.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. Making the decision to” simply” use your imagination and pick one of the many resources and knowledge resources at your disposal.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Would a simple illustration suffice, or should you go with that energizing video? Which typeface is the most calm and inclusive? What fresh techniques and tools do you employ? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How can you ensure that those who are affected by decisions are present when they are made? How can you measure our effects?

The definition of success will fundamentally alter what doing good design entails.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Kick it off or return to the pre-existing

The kickoff is the most important meeting that can be so easy to forget to include. There are two main stages in it: 1 ) coordinating expectations; 2 ) defining success as a goal.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Possumptions are raised and discussed. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For instance, we conducted an online kickoff with the client, a subject-matter expert, and two other designers for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. However, agreeing on what success means for the project in terms of desirability, viability, feasibility, and ethics is just as crucial as expressing expectations. What are the objectives in each dimension?

It is crucial to reach an understanding of what success means at this early stage because you can rely on it for the duration of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. As we agreed in our first meeting, having a diverse user group that includes A and B is essential to creating a successful product. So we do activity X and follow research process Y”. Compare those odds to a situation where the team had to ask for permission halfway through the project and didn’t agree to it in advance. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. An inner ring with the intention of capturing ideas for objectives and an outer ring with the intention of capturing ideas for measuring those objectives are included. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We explored each dimension and recorded ideas on digital sticky notes. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. Additionally, the subject-matter expert stressed the value of involving students from underprivileged and low-income groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s history and purpose: Why do we work on this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• how will we go about defining the scope, process, and role descriptions?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

How do I get started with ethical design, many of my coworkers have questioned me over the past year? My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. There’s no skipping this step if you want to be an ethical, responsible designer.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you think of yourself as a system designer, you need to understand how your industry influences consumerism and inequality, how finance drives business, and how to think creatively about how to use the most powerful tools to influence the system. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Gather your coworkers and instead define design goals for well-being, equity, and sustainability. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Give them their opinions, clarify them, and demand their consent.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my coworkers had questions to ask, such as” Will they take this seriously”?,” Will they take it seriously?” and “Can’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It’s a tempting thought, isn’t it? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

However, as systems theory suggests, that’s not enough. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t allow ourselves to be disconnected from the real world and enjoy our preferred working-from-home lifestyle while remaining trapped in the design-for-design bubble. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. By challenging them to redefine success in business, we must actively engage with our coworkers and clients.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We simply need to come to terms with the right goals at the start of each design project, identify the appropriate metrics, and acknowledge that we already have everything we need to get started. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.

Humility, a writer’s most important quality, has a great circle to it. What about sincerity, an business manager’s necessary value? Or a doctor’s? Or a teacher’s? They all have fantastic sounds. When humility is our guiding light, the course is usually available for fulfillment, development, relation, and commitment. We’re going to speak about why in this book.

That said, this is a guide for developers, and to that conclusion, I’d like to begin with a story—well, a voyage, actually. It’s a personal one, and I’m going to make myself susceptible as well. I call it:

The Ludicrous Pate of Justin: A Tale

When I was coming out of arts school, a long-haired, goateed novice, write was a known quantity to me, design on the web, however, was riddled with complexities to understand and learn, a problem to be solved. Although I had formal training in typography, layout, and creative design, how could these fundamental skills be applied to a developing electric landscape was what piqued my interest. This theme may eventually form the rest of my profession.

But I drained HTML and JavaScript books until the early hours of the morning and self-taught myself how to code during my freshman year rather than student and go into write like many of my friends. I wanted—nay, needed—to better understand the underlying relevance of what my design decisions may think when rendered in a website.

The so-called” Wild West” of website design was the late 1990s and early 2000s. Manufacturers at the time were all figuring out how to use layout and visual connection to the online environment. What regulations were in place? How may we break them and also engage, entertain, and present information? How could my values, which include value, humility, and relation, go along with that on a more general degree? I was eager to find out.

Those are amazing factors between non-career relationships and the world of design, even though I’m referring to a different era. What are your main passions, or ideals, that elevate medium? The main themes are the same, basically the same as what we previously discussed on the immediate parallels between what fulfills you, independent of the physical or digital realms.

First within tables, animated GIFs, Flash, then with Web Standards, divs, and CSS, there was personality, raw unbridled creativity, and unique means of presentment that often defied any semblance of a visible grid. Splash screens and “browser requirement” pages aplenty. Usability and accessibility were typically victims of such a creation, but such paramount facets of any digital design were largely (and, in hindsight, unfairly) disregarded at the expense of experimentation.

For instance, this iteration of my personal portfolio site (” the pseudoroom” ) from that time was experimental if not a little overt in terms of the visual presentation of the idea of a living sketchbook. Quite skeuomorphic. On this one, I worked with fellow artist and dear buddy Marc Clancy, who is now a co-founder of the creative task organizing app Milanote, to outline and then play with various user interactions. Finally, I’d break it down and script it into a modern layout.

Along with pattern book pieces, the site even offered free downloads for Mac OS customizations: desktop wallpapers that were successfully design experimentation, custom-designed typefaces, and desktop icons.

GUI Galaxy was a design, pixel art, and Mac-centric news portal that graphic designer friends and I developed from the beginning.

Design news portals were incredibly popular at the time, and they now accept Tweet-sized, small-format versions of relevant news from the categories I previously covered. If you took Twitter, curated it to a few categories, and wrapped it in a custom-branded experience, you’d have a design news portal from the late 90s / early 2000s.

We had evolved into a bandwidth-sensitive, award-winning, much more accessibility-conscious website using web standards. Still ripe with experimentation, yet more mindful of equitable engagement. There are a few content panes here, with both Mac-focused news and general news (tech, design ) to be seen. We also offered many of the custom downloads I cited before as present on my folio site but branded and themed to GUI Galaxy.

The presentation layer, which included global design, illustration, and news author collaboration, was the backbone of the website. And the collaboration effort here, in addition to experimentation on a’ brand’ and content delivery, was hitting my core. We were creating a larger-than-anyone experience and establishing a global audience.

Collaboration and connection transcend medium in their impact, immensely fulfilling me as a designer.

Now, why am I taking you on this trip through design memory lane? Two reasons.

First of all, there’s a reason for the nostalgia for the” Wild West” era of design that so many personal portfolio and design portals sprang from the past. Ultra-finely detailed pixel art UI, custom illustration, bespoke vector graphics, all underpinned by a strong design community.

The web design industry has been in a state of stagnation right now. I suspect there’s a strong chance you’ve seen a site whose structure looks something like this: a hero image / banner with text overlaid, perhaps with a lovely rotating carousel of images ( laying the snark on heavy there ), a call to action, and three columns of sub-content directly beneath. Perhaps there are selections that vaguely relate to their respective content in an icon library.

Design, as it’s applied to the digital landscape, is in dire need of thoughtful layout, typography, and visual engagement that goes hand-in-hand with all the modern considerations we now know are paramount: usability. accessibility. Load times and bandwidth- sensitive content delivery. A user-friendly presentation that connects with people wherever they are. We must be mindful of, and respectful toward, those concerns—but not at the expense of creativity of visual communication or via replicating cookie-cutter layouts.

Pixel Issues

Websites during this period were often designed and built on Macs whose OS and desktops looked something like this. Although this is Mac OS 7.5, 8 and 9 aren’t all that different.

How could any single icon, at any point, stand out and grab my attention? This fascinated me. In this example, the user’s desktop is tidy, but think of a more realistic example with icon pandemonium. Or, let’s say an icon was a part of a larger system grouping ( fonts, extensions, control panels ): how did it maintain cohesion within a group as well?

These were 32 x 32 pixel creations, utilizing a 256-color palette, designed pixel-by-pixel as mini mosaics. This seemed to me to be the embodiment of digital visual communication under such absurd restrictions. And often, ridiculous restrictions can yield the purification of concept and theme.

So I started doing my homework and conducting my research. I was a student of this new medium, hungry to dissect, process, discover, and make it my own.

I wanted to see how I could use that 256-color palette to push the boundaries of a 32×32 pixel grid, expanding upon the idea of exploration. Those ridiculous constraints forced a clarity of concept and presentation that I found incredibly appealing. I was thrown the digital gauntlet, and that challenge fueled my determination. And so, in my dorm room into the wee hours of the morning, I toiled away, bringing conceptual sketches into mini mosaic fruition.

These are some of my creations that made use of ResEdit, the only program I had at the time, to create icons. ResEdit was a clunky, built-in Mac OS utility not really made for exactly what we were using it for. Research is at the center of all of this endeavor. Challenge. solving problems. Again, these core connection-based values are agnostic of medium.

There’s one more design portal I want to talk about, which also serves as the second reason for my story to bring this all together.

Kaliber 1000 is short for K10k. K10k was founded in 1998 by Michael Schmidt and Toke Nygaard, and was the design news portal on the web during this period. With its pixel art-fueled presentation, attention to detail paid to every aspect of every detail, and many of the more well-known designers of the time who were invited to be news authors on the site, well… it was the place to be, my friend. With respect where respect is due, GUI Galaxy’s concept was inspired by what these folks were doing.

For my part, the combination of my web design work and pixel art exploration began to get me some notoriety in the design scene. K10k eventually added me as one of their very select group of news writers to the website’s content.

Amongst my personal work and side projects —and now with this inclusion—in the design community, this put me on the map. Additionally, my design work has started to appear on other design news portals, as well as be published in various printed collections, in domestic and international magazines, and in various printed collections. With that degree of success while in my early twenties, something else happened:

I actually changed into a colossal asshole in about a year of school, not less. The press and the praise became what fulfilled me, and they went straight to my head. My ego was inflated by them. I actually felt somewhat superior to my fellow designers.

The victims? My design stagnated. My evolution has stagnated, as is its evolution.

I felt so supremely confident in my abilities that I effectively stopped researching and discovering. When I used to lead myself to iterate through concepts or sketches, I leaped right into Photoshop. I drew my inspiration from the smallest of sources ( and with blinders on ). My peers frequently vehemently disapproved of any criticism of my work. The most tragic loss: I had lost touch with my values.

My ego almost destroyed some of my friendships and blossoming professional relationships. I was toxic in talking about design and in collaboration. However, thankfully, those same friends gave me a priceless gift: sincerity. They called me out on my unhealthy behavior.

It’s true, I initially didn’t accept it, but after much reflection, I was able to accept it. I was soon able to accept, and process, and course correct. Although the realization made me feel uneasy, the re-awakening was necessary. I let go of the “reward” of adulation and re-centered upon what stoked the fire for me in art school. Most importantly, I returned to my fundamental values.

Always Students

Following that temporary regression, I was able to advance in both my personal and professional design. And I could self-reflect as I got older to facilitate further growth and course correction as needed.

Let’s take the Large Hadron Collider as an example. The LHC was designed” to help answer some of the fundamental open questions in physics, which concern the basic laws governing the interactions and forces among the elementary objects, the deep structure of space and time, and in particular the interrelation between quantum mechanics and general relativity”. Thank you, Wikipedia.

Around fifteen years ago, in one of my earlier professional roles, I designed the interface for the application that generated the LHC’s particle collision diagrams. These diagrams are the depiction of what is actually happening inside the Collider during any given particle collision event and are frequently regarded as works of art by themselves.

Designing the interface for this application was a fascinating process for me, in that I worked with Fermilab physicists to understand what the application was trying to achieve, but also how the physicists themselves would be using it. In order to accomplish this, in this role,

I cut my teeth on usability testing, working with the Fermilab team to iterate and improve the interface. To me, their language and the topics they discussed seemed to me to be foreign languages. And by making myself humble and working under the mindset that I was but a student, I made myself available to be a part of their world to generate that vital connection.

I also had my first ethnographic observational experience, which involved visiting the Fermilab location and observing how the physicists used the tool in their own environments, on their own terminals. For example, one takeaway was that due to the level of ambient light-driven contrast within the facility, the data columns ended up using white text on a dark gray background instead of black text-on-white. They could read through a lot of data at once and relieve their strain in the process. And Fermilab and CERN are government entities with rigorous accessibility standards, so my knowledge in that realm also grew. Another crucial form of communication was the barrier-free design.

So to those core drivers of my visual problem-solving soul and ultimate fulfillment: discovery, exposure to new media, observation, human connection, and evolution. Before I entered those values, I checked my ego before entering the door.

An evergreen willingness to listen, learn, understand, grow, evolve, and connect yields our best work. I want to pay attention to the words “grow” and “evolve” in that statement in particular. If we are always students of our craft, we are also continually making ourselves available to evolve. Yes, we have years of practical design experience under our belt. Or the focused lab sessions from a UX bootcamp. Or the monogrammed portfolio of our work. Or, ultimately, decades of a career behind us.

However, remember that “experience” does not equate to “expert.”

As soon as we close our minds via an inner monologue of’ knowing it all’ or branding ourselves a” #thoughtleader” on social media, the designer we are is our final form. The creator who we can be will never be there.

In today’s data-driven environment, it’s becoming more common for a UX expert to be asked to create a personal digital experience, whether it be a common website, consumer portal, or native application. However while there continues to be no lack of marketing buzz around personalization systems, we also have very few defined approaches for implementing personalized UX.

We enter that place. After completing tens of personalisation projects over the past few years, we gave ourselves a purpose: could you make a systematic personalization platform especially for UX practitioners? A human-centered personalization program that includes data, classification, content delivery, and general objectives can be compared to the Personalization Pyramid, a design-focused type. By using this strategy, you will be able to understand the core components of a modern, UX-driven personalization system ( or at the very least understand enough to get started ).

Getting Started

We’ll assume that you are already comfortable with the fundamentals of modern personalization for the purposes of this article. A nice guide can be found these: Website Personalization Planning. Although Graphic tasks in this field can take a variety of forms, they frequently start from the same place.

Common scenarios for starting a personalisation task:

• Your business or client made a purchase to support personalization with a content management system ( CMS ), marketing automation platform ( MAP ), or other related technology.
• The CMO, CDO, or CIO has identified personalisation as a target
• Consumer data is unclear or disjointed.
• You are running some secluded targeting strategies or A/B tests
• On the personalisation method, stakeholders disagree.
• Mandate of customer privacy rules ( e. g. GDPR ) requires revisiting existing user targeting practices

Regardless of where you begin, a powerful personalization system will require the same key creating stones. These are the “levels” on the tower, as we’ve made them. Whether you are a UX artist, scholar, or planner, understanding the core components may help make your contribution effective.

From top to bottom, the rates include:

North Star: What larger corporate goal is driving the personalization system?
1. Objectives: What are the specific, tangible benefits of the system?
2. Touchpoints: Where will the personal service been provided?
3. Contexts and Campaigns: What personalization information does the person view?
4. What constitutes a distinct, suitable audience? User Parts
5. Actionable information: What dependable and credible information is captured by our professional platform to generate personalization?
6. Natural Data: What wider set of data is conceivable ( now in our environment ) to allow you to optimize?

We’ll go through each of these amounts in change. To make this more bearable, we created a deck of cards that accompany it to show particular examples from each stage. We’ve found them helpful in customisation brainstorming periods, and will include cases for you here.

Starting at the Top

The tower has the following elements:

North Star

What overall goal do you have with your personalization program ( big or small ) is a northern star. The North Star defines the (one ) overall mission of the personalization program. What do you hope to accomplish? North Stars cast a ghost. The darkness is bigger the sun, the sun, and so on. Example of North Starts may contain:

Function: Optimize based on fundamental customer inputs. Examples:” Raw” messages, basic search effects, system user settings and settings options, general flexibility, basic improvements
1. Feature: Self-contained customisation component. Examples:” Cooked” notifications, advanced optimizations ( geolocation ), basic dynamic messaging, customized modules, automations, recommenders
2. User knowledge: Personal consumer experiences across various user flows and interactions. Examples: Email campaigns, landing pages, advanced messaging ( i. e. C2C chat ) or conversational interfaces, larger user flows and content-intensive optimizations ( localization ).
3. Solution: Highly distinctive, personalized solution experiences. Example: Standalone, branded experience with personalization at their base, like the “algotorial” songs by Spotify quite as Discover Weekly.

Goals

Personalization can help speed up designing with user intentions, as in any great UX design. Goals are the military and tangible metrics that may prove the entire program is effective. Start with your existing analytics and measurement system, as well as indicators you can benchmark against. In some cases, new targets may be ideal. The most important thing to keep in mind is that personalisation is never a desired outcome. It is a means to an end. Common targets include:

• Conversion
• Time spent on work
• Net promoter score ( NPS)
• Client satisfaction

Touchpoints

Touchpoints are where the personalisation happens. This will be one of your biggest areas of responsibility as a UX artist. The connections available to you will depend on how your personalization and associated technology features are instrumented, and should be rooted in improving a person’s experience at a certain point in the trip. Touchpoints can be multi-device ( mobile, in-store, website ), but they can also be more specific ( web banner, web pop-up, etc. ). Several examples are given below:

Channel-level touchpoints

• Email: Role
• Email opens at what time?
• In-store display ( JSON endpoint )
• Native app
• Search

Wireframe-level Touchpoints

• Web overlay
• Web alert bar
• Web banner
• Web content block
• Menu on the web

If you’re designing for web interfaces, for example, you will likely need to include personalized “zones” in your wireframes. Based on our next step, context, and campaigns, the content for these can be presented programmatically in touchpoints.

Contexts and Campaigns

Once you’ve identified some touchpoints, you can decide what kind of personalized content a user will receive. Many personalization tools will refer to these as” campaigns” ( so, for example, a campaign on a web banner for new visitors to the website ). These will be displayed programmatically to specific user segments, as defined by user data. At this stage, we find it helpful to consider two separate models: a context model and a content model. The context helps you consider the level of user engagement at the personalization moment, for instance, if they are just casually browsing information rather than engaging in a deep dive. Think of it in terms of information retrieval behaviors. The content model can then guide you in deciding what kind of personalization to use in the context ( for instance, an” Enrich” campaign that features related articles might be a good substitute for extant content ).

Personalization Context Model:

1. Browse
2. Skim
3. Nudge
4. Feast

Content model for personalization:

1. Alert
2. Make Easier
3. Cross-Sell
4. Enrich

We’ve written a lot about each of these models elsewhere, so if you’d like to read more, check out Colin’s Personalization Content Model and Jeff’s Personalization Context Model.

User Groups

User segments can be created prescriptively or adaptively, based on user research ( e. g. via rules and logic tied to set user behaviors or via A/B testing ). You will need to think about how to treat the unidentified or first-time visitor, the guest or returning visitor for whom you may have a stateful cookie ( or an equivalent post-cookie identifier ), or the logged-in visitor who is authenticated. Here are some examples from the personalization pyramid:

• Unknown
• Guest
• Authenticated
• Default
• Referred
• Role
• Cohort
• Unique ID

Actionable information

Every organization with any digital presence has data. It’s important to inquire about how to use the data you can ethically collect on users, its inherent reliability and value, and what is the term for “data activation.” Fortunately, the tide is turning to first-party data: a recent study by Twilio estimates some 80 % of businesses are using at least some type of first-party data to personalize the customer experience.

First-party data has a number of benefits on the user experience front, including being relatively simple to collect, more likely to be accurate, and less susceptible to the” creep factor” of third-party data. So a key part of your UX strategy should be to determine what the best form of data collection is on your audiences. Several examples are given below:

There is a progression of profiling when it comes to recognizing and making decisioning about different audiences and their signals. As user numbers increase in terms of time, confidence, and data volume, it varies more granularly.

While some combination of implicit / explicit data is generally a prerequisite for any implementation ( more commonly referred to as first party and third-party data ) ML efforts are typically not cost-effective directly out of the box. This is because optimization requires a strong data backbone and content repository. But these approaches should be considered as part of the larger roadmap and may indeed help accelerate the organization’s overall progress. At this point, you will typically work with key stakeholders and product owners to create a profiling model. The profiling model includes defining approach to configuring profiles, profile keys, profile cards and pattern cards. A multi-faceted method of profiling that is adaptable.

Pulling it Together

The cards serve as the foundation for an inventory of sorts ( we provide blanks for you to tailor your own ), a set of potential levers and motivations for the kind of personalization activities you aspire to deliver, but they are more valuable when grouped together.

In assembling a card “hand”, one can begin to trace the entire trajectory from leadership focus down through a strategic and tactical execution. It serves as the foundation for the workshops that both co-authors have conducted to build a program backlog, which would make a good article topic.

In the meantime, what is important to note is that each colored class of card is helpful to survey in understanding the range of choices potentially at your disposal, it is threading through and making concrete decisions about for whom this decisioning will be made: where, when, and how.

Lay Down Your Cards

Any effective personalization strategy must take into account near, middle, and long-term objectives. Even with the leading CMS platforms like Sitecore and Adobe or the most exciting composable CMS DXP out there, there is simply no “easy button” wherein a personalization program can be stood up and immediately view meaningful results. Having said that, all personalization activities follow a common grammar, similar to how every sentence contains nouns and verbs. These cards attempt to map that territory.

I am imaginative. What I do involves science. It is a secret. I prefer to let it be done through me rather than through me.

I have a creative side. Certainly all creative people approve of this brand. Not all people see themselves in this manner. Some innovative individuals incorporate technology into their work. That is the way they are, and I take that into account. Perhaps I have a little bit of fear for them. However, my method is different; my becoming is unique.

It distracts you to apologize and qualify in progress. My head uses that to destroy me. I put it off for the moment. I may regret and be qualified at any time. after I’ve said what I should have. which is difficult enough.

Except when it flows like a beverage valley and is simple.

Sometimes it does. Often I have to create something right away. When I say something at that time, I’ve learned not to say it because people often don’t work hard enough to acknowledge that the idea is the best idea even when you know it’s the best idea.

Maybe I work and work and work until the thought strikes me. Maybe it arrives right away and I don’t remind people for three days. Sometimes I get so excited about an thought that just came along that I blurt it out and didn’t stop myself. like a child who discovered a medal in one of his Cracker Jacks. I occasionally manage to escape this. Yes, that is the best idea, but maybe others disagree. The majority of the time, they don’t, and I regret that joy has faded.

Passion should only be saved for the meet, when it matters. not the informal gathering that two different gatherings precede that appointment. Nothing understands why we hold these gatherings. We keep saying we’re going to get rid of them, but we end up merely trying to. They occasionally yet excel. But occasionally they detract from the real job. Depending on what you do and where you do it, the ratio between when conferences are valuable and when they are a sad distraction vary. also who you are and what you do. Suddenly, I digress. I am imaginative. That is the topic.

Often, a lot of diligent and persistent work ends up with something that is rarely useful. Often I have to accept that and move on to the next task.

Don’t inquire about the procedure. I am imaginative.

I have a creative side. I have no control over my goals. And I have no power over my best tips.

I can chisel aside, surround myself with information or photos, and occasionally that works. I can go for a move, which occasionally works. There is a Eureka, which has nothing to do with boiling pots and sizzling petrol, and I may be making dinner. I frequently have a sense of direction when I awaken. The idea that may have saved me disappears almost as frequently as I become aware and a part of the world once more as a senseless wind of oblivion. For imagination, in my opinion, comes from that other planet. the one that we enter in ambitions and, possibly, before and after suicide. But authors should be asking this, and I am not a writer. I am imaginative. And it’s for philosophers to build massive forces in their imaginative world that they claim to be true. That is yet another diversion, though. And it’s miserable. Possibly on a much bigger issue than whether or not I am creative. But that’s not how I came around, though.

Often the result is evasion. And suffering. You are familiar with the adage” the tortured designer”? Even when the artist attempts to create a soft drink song, a callback in a worn-out sitcom, or a budget request, that noun is correct.

Some individuals who detest being called artistic perhaps been closeted artists, but that’s between them and their gods. No offence here, that’s meant. Your facts is also true. However, mine is for me.

Designers are recognized as artists.

Disadvantages are aware of cons, just like queers are aware of queers, just like real rappers are aware of genuine rappers. Designers are highly revered by people in the world. We revere, follow, and almost deify the great types. Of course, it is dreadful to revere any person. We’ve been given a warning. We are more knowledgeable. We are aware that people are really people. Because they are clay, like us, they squabble, they are depressed, they regret making the most important decisions, they are poor and hungry, they can be violent, and they can be as ridiculous as we can. But. But. However, they produce this incredible issue. They give birth to something that was unable to occur before them or otherwise. They are thought’s founders. And I suppose I should add that they are the mother of technology because it’s just lying it. Bad mee backside! Okay, that’s all done. Continue.

Creatives denigrate our personal small accomplishments because they are compared to those of the great people. Wonderful video I‘m not Miyazaki, so I‘m not. That is glory right now. That is glory directly from God’s heart. I created this drained small issue. It essentially fell off the pumpkin truck’s again. And the carrots weren’t actually new.

Artists is aware that they are at best Some. Also Mozart’s original artists hold that opinion.

I have a creative side. I haven’t worked in advertising in 30 times, but my previous artistic managers are the ones who make my hallucinations. They are correct to do that. When it really matters, my mind goes flat because I am too lazy and complacent. No medication is available to treat artistic function.

I have a creative side. Every project I create has a goal that makes Indiana Jones appear older and snoring in a deck head. The more I pursue creativity, the faster I can complete my work, and the longer I obsess over my ideas and whizz around in circles before I can complete that task.

I can move ten times more quickly than those who aren’t creative, those who have just been creative for a short while, and those who have only been creative for a short time in their careers. Only that I work twice as quickly as they do, putting the work out, just before I do it, When I put my mind to it, I am so confident in my ability to do a wonderful career. I am completely dependent on the excitement scramble of delay. I also have a fear of the climb.

I don’t create art.

I have a creative side. never a performer. Though as a child, I had a dream that I would one day become that. Some of us criticize our abilities and like our own accomplishments because we are not Michelangelos and Warhols. That is narcissism, but at least we don’t practice elections.

I have a creative side. Despite my belief in reason and science, I make decisions based on my own senses and instincts. and accept both the successes and the calamities that come with them.

I have a creative side. Another artists, who see things different, will find every word I’ve said irritate me. Ask a question to two designers, and you’ll find three responses. No matter how we perhaps think about it, our debate, our passion for it, and our responsibility to our own truth, at least in my opinion, are the best indications that we are artists.

I have a creative side. I lament my lack of taste in almost all of the areas of human understanding, which I know very little about. And I put my taste before all other things in the areas that are most dear to my soul, or perhaps more precisely, to my passions. Without my addictions, I’d probably have to spend the majority of our time looking ourselves in the eye, which is something that almost none of us can do for very long. No seriously. Actually, no. Because living is so difficult to handle when you really look at it.

I have a creative side. I think that when I am gone, some of the good parts of me will stay in the head of at least one additional person, just like a family does.

Working frees me from worrying about my job.

I have a creative side. I fear that my little product will disappear.

I have a creative side. I’m too busy making the next thing to devote too much time to it, especially since practically everything I create did achieve the level of success I conceive of.

I have a creative side. I think method is the most amazing secret. I think so strongly that I am also foolish enough to post an essay I wrote into a small machine without having to go through or edit it. I swear I didn’t accomplish this frequently. But I did it right away because I was even more scared of forgetting what I was saying because I was as scared as I might be of you seeing through my sad gestures toward the gorgeous.

There. I believe I’ve said it.

I’ve been fascinated by movies since I was a child. I loved the heroes and the excitement—but most of all the stories. I aspired to be an artist. And I believed that I’d get to do the things that Indiana Jones did and go on interesting activities. I also came up with concept films that my friends and I could create and sun in. But they never went any farther. However, I did end up in the user experience ( UX) field. Today, I realize that there’s an element of drama to UX— I hadn’t actually considered it before, but consumer research is story. And to get the most out of customer studies, you must tell a compelling story that involves stakeholders, including the product team and decision-makers, and piques their interest in learning more.

Think of your favorite film. It probably follows a three-act narrative architecture: the layout, the conflict, and the resolution, which is prevalent in literature. The second act shows what exists now, and it helps you get to know the figures and the challenges and problems that they face. The issue begins in Act 2, which introduces the issue. Here, difficulties grow or get worse. The solution comes in the third and final work. This is where the issues are resolved and the figures learn and change. This structure, in my opinion, is also a fantastic way to think about consumer research, and it might be particularly useful for introducing user research to others.

Use story as a framework for conducting research

It’s sad to say, but many have come to see studies as being inconsequential. Research is typically one of the first things to go when expenses or deadlines are tight. Instead of investing in study, some goods professionals rely on manufacturers or—worse—their personal judgment to make the “right” options for users based on their experience or accepted best practices. That may lead some groups, but that approach can so easily miss the chance to solve people ‘ real issues. To be user-centered, this is something we really avoid. User study improves pattern. It keeps it on trail, pointing to problems and opportunities. You can keep back of your competition by being aware of the problems with your goods and fixing them.

In the three-act structure, each action corresponds to a part of the process, and each part is important to telling the whole story. Let’s take a look at the various functions and how they relate to consumer study.

Act one: layout

The setup consists entirely in comprehending the history, and that’s where basic research comes in. Basic research ( also called conceptual, discovery, or preliminary research ) helps you understand people and identify their problems. Like in the movies, you’re learning about the difficulties users face, what options are available, and how they are affected by them. To do basic research, you may conduct cultural inquiries or journal studies ( or both! ), which can assist you in identifying both prospects and issues. It doesn’t need to be a great investment in time or money.

What is the least practical ethnography that Erika Hall can do is spend fifteen minutes with a consumer and say,” Walk me through your day yesterday. That’s it. Give that one ask. Opened up and listen to them for 15 days. Do everything in your power to protect both your objectives and yourself. Bam, you’re doing ethnography”. Hall predicts that “[This ] will likely prove quite fascinating. In the very unlikely event that you didn’t learn anything new or helpful, carry on with increased confidence in your way”.

This makes perfect sense to me. And I love that this makes consumer studies so visible. You can simply attract participants and carry out the recruitment process without having to create a lot of paperwork! This can offer a wealth of knowledge about your customers, and it’ll help you better understand them and what’s going on in their life. That’s what work one is really all about: understanding where people are coming from.

Maybe Spool talks about the importance of basic research and how it may type the bulk of your research. If you can supplement what you’ve heard in the basic studies by using any more user data that you can obtain, such as surveys or analytics, to make recommendations that may need to be investigated further, you might as well use those that can be drawn from those that you can obtain. Together, all this information creates a clearer picture of the state of things and all its inadequacies. And that’s the start of a gripping tale. It’s the place in the story where you realize that the principal characters—or the people in this case—are facing issues that they need to conquer. This is where you begin to develop compassion for the heroes and support their success, much like in the movies. And finally partners are now doing the same. Their business may lose money because users can’t finish specific tasks, which may be their love. Or probably they do connect with people ‘ problems. In any case, work one serves as your main strategy to pique the interest and interest of the participants.

When partners begin to understand the value of basic research, that is open doors to more opportunities that involve users in the decision-making approach. And that can help goods team become more user-centric. This gains everyone—users, the goods, and partners. It’s similar to winning an Oscar for a film because it frequently results in a favorable and successful outcome for your item. And this can be an opportunity for participants to repeat this process with different items. The secret to this method is storytelling, and knowing how to tell a compelling story is the only way to entice partners to do more research.

This brings us to work two, where you incrementally review a design or idea to see whether it addresses the problems.

Act two: fight

Act two is all about digging deeper into the issues that you identified in action one. This typically involves conducting lateral study, such as accessibility tests, where you evaluate a potential solution ( such as a design ) to see if it addresses the problems you identified. The issues may include unfulfilled needs or problems with a circulation or procedure that’s tripping users off. Additional problems will arise in the course of action two of a film. It’s ok that you learn more about the characters as they grow and develop through this work.

According to Jakob Nielsen, five users should be normally in usability tests, which means that this number of users can generally identify the majority of the issues:” You learn less and less as you add more and more users because you will keep seeing the same things over and over again… After the second user, you are wasting your time by constantly observing the similar findings but no learning much new.”

There are parallels with storytelling here too, if you try to tell a story with too many characters, the plot may get lost. With fewer participants, each user’s struggles will be more memorable and accessible to other parties when presenting the research. This can help convey the issues that need to be addressed while also highlighting the value of doing the research in the first place.

Usability tests have been conducted in person for decades, but you can also do them remotely using software like Microsoft Teams, Zoom, or other teleconferencing software. This approach has become increasingly popular since the beginning of the pandemic, and it works well. You might consider in-person usability tests like watching a movie as opposed to remote testing like attending a play. There are advantages and disadvantages to each. Usability research in person is a much more valuable learning experience. Stakeholders can experience the sessions with other stakeholders. Additionally, you’ll also hear their reactions in real-time, including surprises, disagreements, and discussions of what they’re seeing. Much like going to a play, where audiences get to take in the stage, the costumes, the lighting, and the actors ‘ interactions, in-person research lets you see users up close, including their body language, how they interact with the moderator, and how the scene is set up.

If conducting usability testing in the field is like watching a play that is staged and controlled, where any two sessions may be very different from one another. You can take usability testing into the field by creating a replica of the space where users interact with the product and then conduct your research there. Or you can conduct your research by meeting users at their locations. With either option, you get to see how things work in context, things come up that wouldn’t have in a lab environment—and conversion can shift in entirely different directions. You have less control over how these sessions end as researchers, but this can occasionally help you understand users even better. Meeting users where they are can provide clues to the external forces that could be affecting how they use your product. Usability tests in person offer a level of detail that is frequently absent from remote testing.

That’s not to say that the “movies” —remote sessions—aren’t a good option. Remote training sessions can reach a wider audience. They allow a lot more stakeholders to be involved in the research and to see what’s going on. Additionally, they make access to a much wider user base geographically. But with any remote session there is the potential of time wasted if participants can’t log in or get their microphone working.

You can ask real users questions to understand their thoughts and understanding of the solution as a result of usability testing, whether it is done remotely or in person. This can help you not only identify problems but also glean why they’re problems in the first place. Additionally, you can test your own hypotheses and determine whether your reasoning is correct. By the end of the sessions, you’ll have a much clearer picture of how usable the designs are and whether they work for their intended purposes. The excitement is in the second act, but there are also potential surprises in the third. This is equally true of usability tests. Unexpected things that participants say frequently alter the way you look at things, and these unexpected revelations can lead to unexpected turns in the narrative.

Unfortunately, user research is sometimes seen as expendable. Usability testing is frequently the only method of research that some stakeholders believe they ever need, and it’s too frequently the case. In fact, if the designs that you’re evaluating in the usability test aren’t grounded in a solid understanding of your users ( foundational research ), there’s not much to be gained by doing usability testing in the first place. Because you narrow down the subject matter of your feedback without understanding the needs of the users. As a result, there’s no way of knowing whether the designs might solve a problem that users have. In the context of a usability test, it’s just feedback on a particular design.

On the other hand, if you only do foundational research, while you might have set out to solve the right problem, you won’t know whether the thing that you’re building will actually solve that. This demonstrates the value of conducting both directional and foundational research.

In act two, stakeholders will—hopefully—get to watch the story unfold in the user sessions, which creates the conflict and tension in the current design by surfacing their highs and lows. And in turn, this can encourage stakeholders to take action on the issues raised.

Act three: resolution

The third act is about resolving the issues raised by the first two acts, whereas the first two are about comprehending the context and the tensions that can compel action. While it’s important to have an audience for the first two acts, it’s crucial that they stick around for the final act. That includes the entire product team, including developers, UX experts, business analysts, delivery managers, product managers, and any other interested parties who have a say in the coming development. It allows the whole team to hear users ‘ feedback together, ask questions, and discuss what’s possible within the project’s constraints. Additionally, it enables the UX design and research teams to clarify, suggest alternatives, or provide more context for their choices. So you can get everyone on the same page and get agreement on the way forward.

This act is primarily told in voiceover with some audience participation. The researcher is the narrator, who paints a picture of the issues and what the future of the product could look like given the things that the team has learned. They offer the stakeholders their suggestions and suggestions for how to create this vision.

Nancy Duarte in the Harvard Business Review offers an approach to structuring presentations that follow a persuasive story. The most effective presenters employ the same methods as great storytellers: they create a conflict that needs to be settled by reminding people of the status quo and then revealing a better way, according to Duarte. ” That tension helps them persuade the audience to adopt a new mindset or behave differently”.

This type of structure aligns well with research results, and particularly results from usability tests. It provides proof for “what is “—the issues you’ve identified. And “what could be “—your recommendations on how to address them. And so forth.

You can reinforce your recommendations with examples of things that competitors are doing that could address these issues or with examples where competitors are gaining an edge. Or they can be visual, like quick sketches of how a new design could function to solve a problem. These can help generate conversation and momentum. And this continues until the session is over when you’ve concluded by bridging the gaps and offering suggestions for improvement. This is the part where you reiterate the main themes or problems and what they mean for the product—the denouement of the story. This stage provides stakeholders with the next steps and, hoped, the motivation to take those steps!

While we are nearly at the end of this story, let’s reflect on the idea that user research is storytelling. The three-act structure of user research contains all the components for a good story:

Act one: You meet the protagonists ( the users ) and the antagonists ( the problems affecting users ). The plot begins here. In act one, researchers might use methods including contextual inquiry, ethnography, diary studies, surveys, and analytics. These techniques can produce personas, empathy maps, user journeys, and analytics dashboards.

Act two: Next, there’s character development. The protagonists face problems and difficulties, which they must overcome, and there is conflict and tension. In act two, researchers might use methods including usability testing, competitive benchmarking, and heuristics evaluation. Usability findings reports, UX strategy documents, usability guidelines, and best practices can be included in the output of these.

Act three: The protagonists triumph and you see what a better future looks like. Researchers may use techniques like presentation decks, storytelling, and digital media in act three. The output of these can be: presentation decks, video clips, audio clips, and pictures.

The researcher plays a variety of roles, including producer, director, and storyteller. The participants have a small role, but they are significant characters ( in the research ). And the audience is the audience, as well. But the most important thing is to get the story right and to use storytelling to tell users ‘ stories through research. In the end, the parties should leave with a goal and an eagerness to fix the product’s flaws.

So the next time that you’re planning research with clients or you’re speaking to stakeholders about research that you’ve done, think about how you can weave in some storytelling. In the end, user research is beneficial for everyone, and all you need to do is pique stakeholders ‘ interest in how the story ends.

The personalization space is real, between the dream of getting it right and the worry of it going wrong ( like when we encounter “persofails” similar to a company’s constant plea to regular people to purchase additional bathroom seats ). It’s an particularly confusing place to be a modern professional without a map, a map, or a strategy.

There are no Lonely Planet and some tour guides for those of you who want to personalize because powerful customisation is so dependent on each group’s talent, technology, and market position.

But you can ensure that your group has packed its carriers reasonably.

There’s a DIY method to increase your chances for achievement. You’ll at least at least disarm your boss ‘ irrational exuberance. Before the group you’ll need to properly plan.

We refer to it as prepersonalization.

Behind the song

Take into account Spotify’s DJ element, which debuted this year.

We’re used to seeing the polished final outcome of a personalization have. A personal have had to be developed, budgeted, and given priority before the year-end prize, the making-of-backstory, or the behind-the-scenes success chest. Before any customisation have goes live in your product or service, it lives amid a delay of valuable ideas for expressing consumer experiences more automatically.

So how do you decide where to position your personalization wagers? How do you design regular interactions that hasn’t journey up users or—worse—breed mistrust? We’ve found that for many well-known budgeted programs to support their continued investments, they initially required one or more workshops to join vital technologies users and stakeholders. Make it matter.

We’ve closely monitored the same evolution with our consumers, from major software to young companies. In our experience with working on small and large personalization work, a program’s best monitor record—and its capacity to weather tough questions, work steadily toward shared answers, and manage its design and engineering efforts—turns on how successfully these prepersonalization activities play out.

Effective workshops consistently separate successful future endeavors from unsuccessful ones, saving countless hours of time, resources, and overall well-being.

A personalization practice involves a multiyear effort of testing and feature development. It’s not a tech stack switch-flip. It’s best managed as a backlog that often evolves through three steps:

1. customer experience optimization ( CXO, also known as A/B testing or experimentation )
2. always-on automations ( whether rules-based or machine-generated )
3. mature features or standalone product development ( such as Spotify’s DJ experience )?

This is why we created our progressive personalization framework and why we’re field-testing an accompanying deck of cards: we believe that there’s a base grammar, a set of “nouns and verbs” that your organization can use to design experiences that are customized, personalized, or automated. These cards are not necessary for you. But we strongly recommend that you create something similar, whether that might be digital or physical.

Set the timer for your kitchen.

How long does it take to cook up a prepersonalization workshop? The evaluation activities that we suggest include can last for a number of weeks ( and frequently do ). For the core workshop, we recommend aiming for two to three days. Here are a summary of our broad approach and information on the most crucial first-day activities.

The full arc of the wider workshop is threefold:

Kickstart: This specifies the terms of engagement as you concentrate on both the potential and the team’s and leadership’s readiness and drive.
1. Plan your work: This is the heart of the card-based workshop activities where you specify a plan of attack and the scope of work.
2. Work your plan: This stage consists of making it possible for team members to individually present their own pilots, which each include a proof-of-concept project, business case, and operating model.

Give yourself at least a day, split into two large time blocks, to power through a concentrated version of those first two phases.

Kickstart: Apt your appetite

We call the first lesson the “landscape of connected experience“. It looks at the possibilities for personalization at your company. A connected experience, in our parlance, is any UX requiring the orchestration of multiple systems of record on the backend. This might be a marketing-automation platform combined with a content-management system. It could be a digital-asset manager combined with a customer-data platform.

Give examples of connected experience interactions that you admire, find familiar, or even dislike, as examples of consumer and business-to-business examples. This should cover a representative range of personalization patterns, including automated app-based interactions ( such as onboarding sequences or wizards ), notifications, and recommenders. These are in the cards, which we have a catalog of. Here’s a list of 142 different interactions to jog your thinking.

It’s all about setting the tone. What are the possible paths for the practice in your organization? Here’s a long-form primer and a strategic framework for a broad perspective.

Assess each example that you discuss for its complexity and the level of effort that you estimate that it would take for your team to deliver that feature ( or something similar ). We break down connected experiences into five categories in our cards: functions, features, experiences, complete products, and portfolios. Size your own build here. This will help to draw attention to both the benefits of ongoing investment and the difference between what you currently offer and what you intend to deliver in the future.

Next, have your team plot each idea on the following 2×2 grid, which lays out the four enduring arguments for a personalized experience. This is crucial because it emphasizes how personalization can affect your own methods of working as well as your external customers. It’s also a reminder ( which is why we used the word argument earlier ) of the broader effort beyond these tactical interventions.

Each team member should decide where their focus should be placed for your product or service. Naturally, you can’t prioritize all of them. Here, the goal is to show how various departments may view their own benefits from the effort, which can vary from one department to the next. Documenting your desired outcomes lets you know how the team internally aligns across representatives from different departments or functional areas.

The third and final Kickstart activity is about filling in the personalization gap. Is your customer journey well documented? Will ensuring data and privacy is a major challenge too much? Do you have content metadata needs that you have to address? ( We’re pretty sure you do; it’s just a matter of acknowledging the magnitude of that need and finding a solution. ) In our cards, we’ve noted a number of program risks, including common team dispositions. For instance, our Detractor card lists six intractable stakeholder attitudes that prevent progress.

Effectively collaborating and managing expectations is critical to your success. Consider the potential obstacles to your upcoming progress. Press the participants to name specific steps to overcome or mitigate those barriers in your organization. As research has shown, personalization initiatives face a number of common obstacles.

At this point, you’ve hopefully discussed sample interactions, emphasized a key area of benefit, and flagged key gaps? Good, you’re ready to go on.

Hit that test kitchen

Next, let’s take a look at what you’ll need to create personalization recipes. Personalization engines, which are robust software suites for automating and expressing dynamic content, can intimidate new customers. Their capabilities are broad and potent, and they give you a variety of ways to organize your company. This presents the question: Where do you begin when you’re configuring a connected experience?

The key here is to avoid treating the installed software ( as one of our client executives humorously put it ) like some sort of dream kitchen. These software engines are more like test kitchens where your team can begin devising, tasting, and refining the snacks and meals that will become a part of your personalization program’s regularly evolving menu.

Over the course of the workshop, the ultimate menu of the prioritized backlog will come together. And creating “dishes” is the way that you’ll have individual team stakeholders construct personalized interactions that serve their needs or the needs of others.

The dishes will be made from recipes, which have predetermined ingredients.

Verify your ingredients

Like a good product manager, you’ll make sure you have everything ready to cook up your desired interaction ( or figure out what needs to be added to your pantry ) and that you validate with the right stakeholders present. These ingredients include the audience that you’re targeting, content and design elements, the context for the interaction, and your measure for how it’ll come together.

Not just discovering requirements, it is. Documenting your personalizations as a series of if-then statements lets the team:

1. compare findings to a common strategy for developing features, similar to how artists paint with the same color palette,
2. specify a consistent set of interactions that users find uniform or familiar,
3. and establish parity among performance indicators and key performance indicators as well.

This helps you streamline your designs and your technical efforts while you deliver a shared palette of core motifs of your personalized or automated experience.

Create your recipe.

What ingredients are important to you? Consider the construct of a who-what-when-why

• Who are your key audience segments or groups?
• What content, what design elements, and under what circumstances will you give them?
• And for which business and user benefits?

Five years ago, we created these cards and card categories. We regularly play-test their fit with conference audiences and clients. And there are still fresh possibilities. But they all follow an underlying who-what-when-why logic.

In the cards in the accompanying photo below, you can typically follow along with right to left in three examples of subscription-based reading apps.

1. Nurture personalization: When a guest or an unknown visitor interacts with a product title, a banner or alert bar appears that makes it easier for them to encounter a related title they may want to read, saving them time.
2. Welcome automation: An email is sent to a newly registered user to highlight the breadth of the content catalog and convert them to happy subscribers.
3. Winback automation: Before their subscription lapses or after a recent failed renewal, a user is sent an email that gives them a promotional offer to suggest that they reconsider renewing or to remind them to renew.

We’ve also found that cocreating the recipes themselves can sometimes be the most effective way to start brainstorming about what these cards might be for your organization. Start with a set of blank cards, and begin labeling and grouping them through the design process, eventually distilling them to a refined subset of highly useful candidate cards.

The workshop’s later stages, which shift from focusing on cookbooks to focusing on customers, might seem more nuanced. Individual” cooks” will pitch their recipes to the team, using a common jobs-to-be-done format so that measurability and results are baked in, and from there, the resulting collection will be prioritized for finished design and delivery to production.

Architecture must be improved to produce better kitchens.

Simplifying a customer experience is a complicated effort for those who are inside delivering it. Beware of anyone who contradicts your advice. With that being said,” Complicated problems can be hard to solve, but they are addressable with rules and recipes“.

When a team is overfitting, it’s because they aren’t designing with their best data, which is why personalization turns into a laugh line. Like a sparse pantry, every organization has metadata debt to go along with its technical debt, and this creates a drag on personalization effectiveness. For instance, your AI’s output quality is in fact impacted by your IA. Spotify’s poster-child prowess today was unfathomable before they acquired a seemingly modest metadata startup that now powers its underlying information architecture.

You can’t stand the heat, in fact…

Personalization technology opens a doorway into a confounding ocean of possible designs. Only a disciplined and highly collaborative approach will produce the necessary concentration and intention for success. So banish the dream kitchen. Instead, head to the test kitchen to burn off the fantastical ideas that the doers in your organization have in store for time, to preserve job satisfaction and security, and to avoid unnecessary distractions. There are meals to serve and mouths to feed.

You have a better chance of lasting success and sound beginnings with this workshop framework. Wiring up your information layer isn’t an overnight affair. However, if you use the same cookbook and the same recipes, you’ll have solid ground for success. We designed these activities to make your organization’s needs concrete and clear, long before the hazards pile up.

Although there are associated costs associated with purchasing this kind of technology and product design, your time well spent is on sizing up and confronting your unique situation and digital skills. Don’t squander it. The pudding is the proof, as they say.