Blog

One of the most successful soft knowledge we have at our disposal is the ability to work together to improve our patterns while developing our own abilities and opinions, in whatever form it takes, and whatever it may be called.

Feedback is also one of the most underestimated equipment, and generally by assuming that we’re now great at it, we settle, forgetting that it’s a skill that can be trained, grown, and improved. Bad opinions can lead to conflict in projects, lower morale, and long-term, undermine trust and teamwork. Quality comments can be a revolutionary force.

Practicing our knowledge is absolutely a good way to enhance, but the learning gets yet faster when it’s paired with a good base that programs and focuses the exercise. What are some fundamental components of providing effective opinions? And how can comments be adjusted for isolated and distributed job settings?

A long history of sequential opinions can be found online: code was written and discussed on mailing lists before becoming an open source standard. Currently, engineers engage on pull calls, developers post in their favourite design tools, project managers and sprint masters exchange ideas on tickets, and so on.

Design analysis is often the label used for a type of input that’s provided to make our job better, jointly. It generally shares many of the concepts with suggestions, but it also has some differences.

The information

The content of the feedback is the basis of every effective criticism, so where do we need to begin? There are many versions that you can use to design your content. The one that I personally like best—because it’s obvious and actionable—is this one from Lara Hogan.

This formula is typically used to provide feedback to people, but it also fits really well in a design criticism because it finally addresses one of the main inquiries that we work on: What? Where? Why? How? Imagine that you’re giving some comments about some pattern function that spans several screens, like an onboard movement: there are some pages shown, a movement blueprint, and an outline of the decisions made. You notice something that needs to be improved. If you keep the three elements of the equation in mind, you’ll have a mental model that can help you be more precise and effective.

Here is a comment that could be included in some feedback, and it might appear reasonable at first glance because it appears to partially fulfill the requirements. But does it?

Not sure about the buttons ‘ styles and hierarchy—it feels off. Can you alter them?

Observation for design feedback doesn’t just mean pointing out which part of the interface your feedback refers to, but it also refers to offering a perspective that’s as specific as possible. Do you offer the user’s viewpoint? Your expert perspective? A business perspective? From the perspective of the project manager? A first-time user’s perspective?

When I see these two buttons, I anticipate one to go forward and the other to go back.

Impact is about the why. Just pointing out a UI element might sometimes be enough if the issue may be obvious, but more often than not, you should add an explanation of what you’re pointing out.

When I see these two buttons, I anticipate one to go forward and the other to go back. But this is the only screen where this happens, as before we just used a single button and an “×” to close. This seems to be breaking the consistency in the flow.

The question approach is meant to provide open guidance by eliciting the critical thinking in the designer receiving the feedback. Notably, in Lara’s equation she provides a second approach: request, which instead provides guidance toward a specific solution. While that’s a viable option for feedback in general, in my experience, going back to the question approach typically leads to the best solutions because designers are generally more at ease in being given an open space to explore.

The difference between the two can be exemplified with, for the question approach:

When I see these two buttons, I anticipate one to go forward and the other to go back. But this is the only screen where this happens, as before we just used a single button and an “×” to close. This seems to be breaking the consistency in the flow. Would it make sense to unify them?

Or, for the request approach:

When I see these two buttons, I anticipate one to go forward and the other to go back. But this is the only screen where this happens, as before we just used a single button and an “×” to close. This seems to be breaking the consistency in the flow. Let’s make sure that all screens have the same pair of forward and back buttons.

At this point in some situations, it might be useful to integrate with an extra why: why you consider the given suggestion to be better.

When I see these two buttons, I anticipate one to go forward and the other to go back. But this is the only screen where this happens, as before we just used a single button and an “×” to close. This seems to be breaking the consistency in the flow. Let’s make sure that all screens have the same two forward and back buttons so that users don’t get confused.

Choosing the question approach or the request approach can also at times be a matter of personal preference. I spent a while working on improving my feedback, conducting anonymous feedback reviews and sharing feedback with others. After a few rounds of this work and a year later, I got a positive response: my feedback came across as effective and grounded. Until I changed teams. Quite unexpected, my next round of criticism from one particular person wasn’t very positive. The reason is that I had previously tried not to be prescriptive in my advice—because the people who I was previously working with preferred the open-ended question format over the request style of suggestions. However, there was a person in this other team who had always preferred specific guidance. So I adapted my feedback for them to include requests.

One comment that I heard come up a few times is that this kind of feedback is quite long, and it doesn’t seem very efficient. Yes, but no. Let’s explore both sides.

No, because of the length in question, this kind of feedback is effective and can provide just enough information for a sound fix. Also if we zoom out, it can reduce future back-and-forth conversations and misunderstandings, improving the overall efficiency and effectiveness of collaboration beyond the single comment. Imagine that in the example above the feedback were instead just,” Let’s make sure that all screens have the same two forward and back buttons”. The designer receiving this feedback wouldn’t have much to go by, so they might just implement the change. In later iterations, the interface might change or they might introduce new features—and maybe that change might not make sense anymore. Without explaining the why, the designer might assume that the change is one of consistency, but what if it wasn’t? So there could now be an underlying concern that changing the buttons would be perceived as a regression.

Yes, this style of feedback is not always efficient because the points in some comments don’t always need to be exhaustive, sometimes because certain changes may be obvious (” The font used doesn’t follow our guidelines” ) and sometimes because the team may have a lot of internal knowledge such that some of the whys may be implied.

Therefore, the equation above is intended to serve as a mnemonic to reflect and enhance the practice rather than a strict template for feedback. Even after years of active work on my critiques, I still from time to time go back to this formula and reflect on whether what I just wrote is effective.

The atmosphere

Well-grounded content is the foundation of feedback, but that’s not really enough. The soft skills of the person who’s providing the critique can multiply the likelihood that the feedback will be well received and understood. It has been demonstrated that only positive feedback can lead to sustained change in people. It can be determined by tone alone whether content is rejected or welcomed.

Since our goal is to be understood and to have a positive working environment, tone is essential to work on. Over the years, I’ve tried to summarize the necessary soft skills in a formula that resembles the one for content: the receptivity equation.

Respectful feedback comes across as grounded, solid, and constructive. It’s the kind of feedback that, whether it’s positive or negative, is perceived as useful and fair.

Timing refers to the moment when the feedback occurs. To-the-point feedback doesn’t have much hope of being well received if it’s given at the wrong time. When a new feature’s entire high-level information architecture is about to go on sale, it might still be relevant if the questioning raises a significant blocker that no one saw, but those concerns are much more likely to have to wait for a later revision. So in general, attune your feedback to the stage of the project. Early iteration? Iteration that was later? Polishing work in progress? Each of these needs a different one. The right timing will make it more likely that your feedback will be well received.

Attitude is the equivalent of intent, and in the context of person-to-person feedback, it can be referred to as radical candor. That entails checking before writing to see if what we have in mind will actually help the person and improve the project overall. This might be a hard reflection at times because maybe we don’t want to admit that we don’t really appreciate that person. Although it’s possible, and that’s okay, it’s hoped not to be the case. Acknowledging and owning that can help you make up for that: how would I write if I really cared about them? How can I avoid being passive aggressive? How can I be more helpful?

Form is relevant especially in a diverse and cross-cultural work environments because having great content, perfect timing, and the right attitude might not come across if the way that we write creates misunderstandings. There could be many reasons for this, including the fact that occasionally certain words may cause specific reactions, that non-native speakers may not be able to comprehend all thenuances of some sentences, that our brains may be different, and that we may perceive the world differently. Neurodiversity is a requirement. Whatever the reason, it’s important to review not just what we write but how.

A few years back, I was asking for some feedback on how I give feedback. I was given some sound advice, but I also got a surprise comment. They pointed out that when I wrote” Oh, ]… ]”, I made them feel stupid. That wasn’t my intention at all! I felt really bad, and I just realized that I provided feedback to them for months, and every time I might have made them feel stupid. I was horrified … but also thankful. I quickly changed my spelling mistake by adding “oh” to my list of replaced words (your choice between aText, TextExpander, or others ) so that when I typed “oh,” it was immediately deleted.

Something to highlight because it’s quite frequent—especially in teams that have a strong group spirit—is that people tend to beat around the bush. It’s important to keep in mind that having a positive attitude doesn’t necessarily mean passing judgment on the feedback; rather, it simply means that even when you give difficult, or difficult feedback, you do so in a way that’s respectful and constructive. The nicest thing that you can do for someone is to help them grow.

We have a great advantage in giving feedback in written form: it can be reviewed by another person who isn’t directly involved, which can help to reduce or remove any bias that might be there. When I shared a comment and asked someone I trusted,” How does this sound,”” How can I do it better,” or even” How would you have written it,” I discovered that the best, most insightful moments for me occurred when I saw the two versions side by side.

The format

Asynchronous feedback also has a significant inherent benefit: we can devote more time to making sure that the suggestions ‘ clarity of communication and actionability meet two main objectives.

Let’s imagine that someone shared a design iteration for a project. You are reviewing it and leaving a comment. Let’s try to think about some factors that might be helpful to consider, as there are many ways to accomplish this, and context is of course a factor.

In terms of clarity, start by grounding the critique that you’re about to give by providing context. This includes specifically describing where you’re coming from: do you have a thorough understanding of the project, or is this your first time seeing it? Are you coming from a high-level perspective, or are you figuring out the details? Are there regressions? Which user’s point of view do you consider when providing feedback? Is the design iteration at a point where it would be okay to ship this, or are there major things that need to be addressed first?

Even if you’re giving feedback to a team that already has some background information on the project, providing context is helpful. And context is absolutely essential when giving cross-team feedback. If I were to review a design that might be indirectly related to my work, and if I had no knowledge about how the project arrived at that point, I would say so, highlighting my take as external.

We frequently concentrate on the negatives and attempt to list every possible improvement. That’s of course important, but it’s just as important—if not more—to focus on the positives, especially if you saw progress from the previous iteration. Although this may seem superfluous, it’s important to keep in mind that design is a field with hundreds of possible solutions for each problem. So pointing out that the design solution that was chosen is good and explaining why it’s good has two major benefits: it confirms that the approach taken was solid, and it helps to ground your negative feedback. In the longer term, sharing positive feedback can help prevent regressions on things that are going well because those things will have been highlighted as important. Positive feedback can also help to lessen impostor syndrome as an added bonus.

There’s one powerful approach that combines both context and a focus on the positives: frame how the design is better than the status quo ( compared to a previous iteration, competitors, or benchmarks ) and why, and then on that foundation, you can add what could be improved. There is a significant difference between a critique of a design that is already in good shape and one that isn’t quite there yet.

Another way that you can improve your feedback is to depersonalize the feedback: the comments should always be about the work, never about the person who made it. It’s” This button isn’t well aligned” versus” You haven’t aligned this button well”. This can be changed in your writing very quickly by reviewing it just before sending.

In terms of actionability, one of the best approaches to help the designer who’s reading through your feedback is to split it into bullet points or paragraphs, which are easier to review and analyze one by one. You might also consider breaking up the feedback into sections or even across multiple comments if it is longer. Of course, adding screenshots or signifying markers of the specific part of the interface you’re referring to can also be especially useful.

One approach that I’ve personally used effectively in some contexts is to enhance the bullet points with four markers using emojis. A red square indicates that it is something I consider blocking, a yellow diamond indicates that it needs to be changed, and a green circle provides a thorough, positive confirmation. I also use a blue spiral � � for either something that I’m not sure about, an exploration, an open alternative, or just a note. However, I’d only use this strategy on teams where I’ve already established a high level of trust because it might turn out to be quite demoralizing if I deliver a lot of red squares and change how I communicate that.

Let’s see how this would work by reusing the example that we used earlier as the first bullet point in this list:

• 🔶 Navigation—When I see these two buttons, I anticipate one to go forward and the other to go back. But this is the only screen where this happens, as before we just used a single button and an “×” to close. This seems to be breaking the consistency in the flow. Let’s make sure that all screens have the same two forward and back buttons so that users don’t get confused.
• � � Overall— I think the page is solid, and this is good enough to be our release candidate for a version 1.0.
• � � Metrics—Good improvement in the buttons on the metrics area, the improved contrast and new focus style make them more accessible.
• Button Style: Using the green accent in this context gives the impression that it’s a positive action because green is typically seen as a confirmation color. Do we need to explore a different color?
• Given the number of items on the page and the overall page hierarchy, it seems to me that the tiles should use Subtitle 2 instead of Subtitle 1. This will keep the visual hierarchy more consistent.
• � � Background—Using a light texture works well, but I wonder whether it adds too much noise in this kind of page. What is the purpose behind using that?

What about giving feedback directly in Figma or another design tool that allows in-place feedback? These are generally difficult to use because they conceal discussions and are harder to follow, but in the right setting, they can be very effective. Just make sure that each of the comments is separate so that it’s easier to match each discussion to a single task, similar to the idea of splitting mentioned above.

One final note: say the obvious. Sometimes we might feel good or bad about something, so we don’t say it. Or sometimes we might have a doubt that we don’t express because the question might sound stupid. Say it, that’s fine. You might have to reword it a little bit to make the reader feel more comfortable, but don’t hold it back. Good feedback is transparent, even when it may be obvious.

Another benefit of asynchronous feedback is that written feedback automatically monitors decisions. Especially in large projects,” Why did we do this”? there’s nothing better than open, transparent discussions that can be reviewed at any time, and this could be a question that arises from time to time. For this reason, I recommend using software that saves these discussions, without hiding them once they are resolved.

Content, tone, and format. Although each of these subjects offers a useful model, focusing on improving eight of the subjects ‘ focus points, including observation, impact, question, timing, attitude, form, clarity, and actionability, is a lot of work to complete at once. One effective approach is to take them one by one: first identify the area that you lack the most (either from your perspective or from feedback from others ) and start there. Then the third, the third, and so on. At first you’ll have to put in extra time for every piece of feedback that you give, but after a while, it’ll become second nature, and your impact on the work will multiply.

Thanks to Brie Anne Demkiw and Mike Shelton for reviewing the first draft of this article.

” Any post” you might have? is perhaps one of the worst ways to ask for opinions. It’s obscure and unfocused, and it doesn’t give us a sense of what we’re looking for. Getting good opinions starts sooner than we might hope: it starts with the demand.

When we realize that receiving input can be seen as a form of pattern study, it might seem counterintuitive to begin the process with a question. In the same way that we wouldn’t perform any studies without the correct questions to get the insight that we need, the best way to ask for feedback is also to build strong issues.

Design criticism is never a one-time procedure. Sure, any great comments process continues until the project is finished, but this is especially true for layout because architecture work continues iteration after iteration, from a high level to the finest details. Each stage requires its unique set of questions.

And suddenly, as with any great research, we need to examine what we got up, get to the base of its perspectives, and take action. Problem, generation, and analysis. This look at each of those.

The query

Being available to input is important, but we need to be specific about what we’re looking for. Any comments,” What do you think,” or” I’d love to hear your mind” at the conclusion of a presentation are likely to garner a lot of different ideas, or worse, to make everyone follow the lead of the first speaker. And next… we get frustrated because vague issues like those can change a high-level moves review into folks rather commenting on the borders of buttons. Which topic may be a wholesome one, so it might be difficult to get the team to switch to the subject you wanted to concentrate on.

But how do we get into this scenario? It’s a combination of various aspects. One is that we don’t often consider asking as a part of the input approach. Another is how healthy it is to keep the question open and assume that everyone else will agree. Another is that in nonprofessional conversations, there’s usually no need to be that exact. In summary, we tend to undervalue the value of the issues, so we don’t work to make them better.

The work of asking good questions guidelines and focuses the criticism. It’s even a form of acceptance because it specifies what kind of comments you’d like to receive and how you’re open to them. It puts people in the right emotional position, especially in situations when they weren’t expecting to provide feedback.

There isn’t a second best method to request comments. It simply needs to be certain, and sensitivity can take several shapes. The one of stage than level is a design for design criticism that I’ve found to be particularly helpful in my coaching.

” Stage” refers to each of the actions of the process—in our event, the design process. The kind of feedback changes as the person research moves forward to the final design. But within a single stage, one might also examine whether some assumptions are correct and whether there’s been a suitable language of the amassed opinions into updated designs as the task has evolved. The layers of user experience could serve as a starting point for future inquiries. What do you want to know: Project objectives? user requirements? Functionality? Content? Interaction design? a system of information architecture UI design? navigation planning Visual design? Branding?

Here’re a few example questions that are precise and to the point that refer to different layers:

• Functionality: Is it desirable to automate account creation?
• Interaction design: Take a look through the updated flow and let me know whether you see any steps or error states that I might’ve missed.
• Information architecture: On this page, we have two competing pieces of information. Is the structure effective in communicating them both?
• User interface design: What do you think about the top-of-the-page error counter, which makes sure you can see the next error even when the error is outside the viewport?
• Navigation design: From research, we identified these second-level navigation items, but once you’re on the page, the list feels too long and hard to navigate. Do you have any suggestions for how to handle this?
• Visual design: Are the sticky notifications in the bottom-right corner visible enough?

The other axis of specificity is determined by how far you would like to go with the presentation. For example, we might have introduced a new end-to-end flow, but there was a specific view that you found particularly challenging and you’d like a detailed review of that. This can be especially helpful from one iteration to the next when it’s crucial to highlight the areas that have changed.

There are other things that we can consider when we want to achieve more specific—and more effective—questions.

A quick fix is to get rid of the generic qualifiers from questions like “good”, “well,” “nice,” “bad,” “okay,” and” cool.” For example, asking,” When the block opens and the buttons appear, is this interaction good”? is possible to appear specific, but the “good” qualifier can be found in an even better question,” When the block opens and the buttons appear, is it clear what the next action is?”

Sometimes we actually do want broad feedback. That’s uncommon, but it can occur. In that sense, you might still make it explicit that you’re looking for a wide range of opinions, whether at a high level or with details. Or perhaps just say,” At first glance, what do you think”? so that it’s clear that what you’re asking is open ended but focused on someone’s impression after their first five seconds of looking at it.

Sometimes the project is particularly broad, and some areas may have already been thoroughly explored. In these situations, it might be useful to explicitly say that some parts are already locked in and aren’t open to feedback. Although it’s not something I’d recommend in general, I’ve found it helpful in avoiding falling into rabbit holes like those that could lead to further refinement but aren’t what’s important right now.

Asking specific questions can completely change the quality of the feedback that you receive. People who have less refined critique abilities will now be able to provide more useful feedback, and even experienced designers will appreciate the clarity and effectiveness gained from concentrating solely on what is required. It can save a lot of time and frustration.

The iteration

Design iterations are probably the most visible part of the design work, and they provide a natural checkpoint for feedback. Many design tools have inline commenting, but many of those methods typically display changes as a single fluid stream in the same file. These methods cause conversations to vanish once they’re resolved, update shared UI components automatically, and require designs to always display the most recent version unless these would-be useful features were manually turned off. The implied goal that these design tools seem to have is to arrive at just one final copy with all discussions closed, probably because they inherited patterns from how written documents are collaboratively edited. That’s probably not the most effective way to go about designing critiques, but even if I don’t want to be too prescriptive, it might work for some teams.

The asynchronous design-critique approach that I find most effective is to create explicit checkpoints for discussion. I’m going to use the term iteration post for this. It refers to a write-up or presentation of the design iteration followed by a discussion thread of some kind. This can be used on any platform that can accommodate this structure. By the way, when I refer to a “write-up or presentation“, I’m including video recordings or other media too: as long as it’s asynchronous, it works.

There are many benefits to using iteration posts:

• It creates a rhythm in the design work so that the designer can review feedback from each iteration and prepare for the next.
• Decisions are always available, and conversations are also made accessible for future review.
• It creates a record of how the design changed over time.
• It might also make it simpler to collect and act on feedback depending on the tool.

These posts of course don’t mean that no other feedback approach should be used, just that iteration posts could be the primary rhythm for a remote design team to use. And from there, there can develop additional feedback techniques ( such as live critique, pair designing, or inline comments ).

I don’t think there’s a standard format for iteration posts. However, there are a few high-level components that make sense as a baseline:

1. The goal
2. The layout
3. The list of changes
4. The querys

Each project is likely to have a goal, and hopefully it’s something that’s already been summarized in a single sentence somewhere else, such as the client brief, the product manager’s outline, or the project owner’s request. Therefore, I would repeat this in every iteration post, literally copy and pasting it. The idea is to provide context and to repeat what’s essential to make each iteration post complete so that there’s no need to find information spread across multiple posts. The most recent iteration post will provide all I need to know about the most recent design.

This copy-and-paste part introduces another relevant concept: alignment comes from repetition. Therefore, repeating information in posts is actually very effective at ensuring that everyone is on the same page.

The design is then the actual series of information-architecture outlines, diagrams, flows, maps, wireframes, screens, visuals, and any other kind of design work that’s been done. It’s any design object, to put it briefly. For the final stages of work, I prefer the term blueprint to emphasize that I’ll be showing full flows instead of individual screens to make it easier to understand the bigger picture.

It might also be helpful to have clear names on the artifacts so that it is easier to refer to them. Write the post in a way that helps people understand the work. It’s not much different from creating a strong live presentation.

For an efficient discussion, you should also include a bullet list of the changes from the previous iteration to let people focus on what’s new, which can be especially useful for larger pieces of work where keeping track, iteration after iteration, could become a challenge.

Finally, as mentioned earlier, a list of the questions must be included in order to help you guide the design critique in the desired direction. Doing this as a numbered list can also help make it easier to refer to each question by its number.

Not every iteration is the same. Earlier iterations don’t need to be as tightly focused—they can be more exploratory and experimental, maybe even breaking some of the design-language guidelines to see what’s possible. Then, later, the iterations begin coming to a decision and improving it until the design process is complete and the feature is ready.

I want to highlight that even if these iteration posts are written and conceived as checkpoints, by no means do they need to be exhaustive. A post might be just a concept to start a conversation, or it might be a cumulative list of all the features that have been added gradually over the course of each iteration until the full picture is achieved.

Over time, I also started using specific labels for incremental iterations: i1, i2, i3, and so on. Although this may seem like a minor labeling tip, it can be useful in many ways:

• Unique—It’s a clear unique marker. Everyone knows where to go to review things, and it’s simple to say” This was discussed in i4″ with each project.
• Unassuming—It works like versions ( such as v1, v2, and v3 ) but in contrast, versions create the impression of something that’s big, exhaustive, and complete. Attempts must be exploratory, incomplete, or partial.
• Future proof—It resolves the “final” naming problem that you can run into with versions. No more files with the title “final final complete no-really-its-done” Within each project, the largest number always represents the latest iteration.

The wording release candidate (RC ) could be used to indicate when a design is finished enough to be worked on, even if there are some bits that still need work and, in turn, need more iterations:” with i8 we reached RC” or “i12 is an RC” to illustrate this.

The review

What typically occurs during a design critique is an open discussion, with a back and forth between parties that can be very productive. This approach is particularly effective during live, synchronous feedback. However, using a different approach when we work asynchronously is more effective: adopting a user-research mindset. Written feedback from teammates, stakeholders, or others can be treated as if it were the result of user interviews and surveys, and we can analyze it accordingly.

This shift has some significant advantages, making asynchronous feedback particularly effective, especially around these friction points:

1. It removes the pressure to reply to everyone.
2. It lessens the annoyance caused by swoop-by comments.
3. It lessens our personal stake.

The first friction is being forced to respond to every comment. Sometimes we write the iteration post, and we get replies from our team. It’s just a few of them, it’s simple, and there isn’t much to worry about. But other times, some solutions might require more in-depth discussions, and the amount of replies can quickly increase, which can create a tension between trying to be a good team player by replying to everyone and doing the next design iteration. This might be especially true if the respondent is a stakeholder or a person who is directly involved in the project and whom we feel we need to speak with. We need to accept that this pressure is absolutely normal, and it’s human nature to try to accommodate people who we care about. When we treat a design critique more like user research, we realize that we don’t need to respond to every comment, and there are alternatives: In asynchronous spaces, responding to all comments can be effective.

One is to let the next iteration speak for itself. That is the response when the design changes and we publish a follow-up iteration. You might tag all the people who were involved in the previous discussion, but even that’s a choice, not a requirement.
• Another option is to respond politely to acknowledge each comment, such as” Understood. Thank you”,” Good points— I’ll review”, or” Thanks. In the upcoming iteration, I’ll include these. In some cases, this could also be just a single top-level comment along the lines of” Thanks for all the feedback everyone—the next iteration is coming soon”!
• One more thing is to quickly summarize the comments before proceeding. Depending on your workflow, this can be particularly useful as it can provide a simplified checklist that you can then use for the next iteration.

The swoop-by comment, which is the kind of feedback that comes from a member of a team or non-project who might not be aware of the context, restrictions, decisions, or requirements, or of the discussions from earlier iterations, is the second friction point. On their side, there’s something that one can hope that they might learn: they could start to acknowledge that they’re doing this and they could be more conscious in outlining where they’re coming from. Swoop-by comments frequently prompt the simple thought,” We’ve already discussed this,” and it can be frustrating to have to keep coming back and forth.

Let’s begin by acknowledging again that there’s no need to reply to every comment. However, a brief response with a link to the previous discussion for additional information is typically sufficient if responding to a previously litigated point might be helpful. Remember, alignment comes from repetition, so it’s okay to repeat things sometimes!

Swoop-by commenting can still be useful for two reasons: first, they might point out something that isn’t clear, and second, they might have the power to fit in with a user’s perspective when they are seeing the design for the first time. Sure, you’ll still be frustrated, but that might at least help in dealing with it.

The personal stake we might have in the design could be the third friction point, which might cause us to feel defensive if the review turned into a discussion. Treating feedback as user research helps us create a healthy distance between the people giving us feedback and our ego ( because yes, even if we don’t want to admit it, it’s there ). In the end, presenting everything in aggregated form helps us to prioritize our work more.

Always remember that while you need to listen to stakeholders, project owners, and specific advice, you don’t have to accept every piece of feedback. You must examine it and come up with a conclusion that you can support, but sometimes “no” is the best choice.

As the designer leading the project, you’re in charge of that decision. In the end, everyone has their area of specialization, and the designer is the one with the most background and knowledge to make the right choice. And by listening to the feedback that you’ve received, you’re making sure that it’s also the best and most balanced decision.

Thanks to Mike Shelton and Brie Anne Demkiw for their initial review of this article.

Although I’m not certain when I first heard this statement, it has stuck with me over the centuries. How do you generate solutions for scenarios you can’t think? Or create materials that are functional on products that have not yet been created?

Flash, Photoshop, and flexible pattern

When I first started designing sites, my go-to technology was Photoshop. I started by making a design for a 960px canvas that I would later add glad to. The growth phase was about attaining pixel-perfect precision using set widths, fixed levels, and absolute placement.

All of this was altered by Ethan Marcotte’s speak at An Event Apart and the subsequent article in A Checklist Off in 2010. I was sold on reactive style as soon as I heard about it, but I was even terrified. The pixel-perfect models full of special figures that I had formerly prided myself on producing were no longer good enough.

My first encounter with flexible design didn’t help my fear. My second project was to get an active fixed-width website and make it reactive. I quickly realized that you didn’t just put responsiveness at the end of a job. To make smooth design, you need to prepare throughout the style stage.

A new way to style

Making flexible or smooth websites has always been about removing restrictions and creating content that can be viewed on any system. It relies on the use of percentage-based design, which I immediately achieved with local CSS and power groups:

.column-span-6 { width: 49%; float: left; margin-right: 0.5%; margin-left: 0.5%;}.column-span-4 { width: 32%; float: left; margin-right: 0.5%; margin-left: 0.5%;}.column-span-3 { width: 24%; float: left; margin-right: 0.5%; margin-left: 0.5%;}

Therefore with Sass but that I could use @includes to re-use repeated blocks of code and transition to more semantic premium:

.logo { @include colSpan(6);}.search { @include colSpan(3);}.social-share { @include colSpan(3);}

Media concerns

The next ingredient for flexible design is press queries. Without them, regardless of whether the content remained readable, would shrink to fit the available space. ( The exact opposite issue developed with the introduction of a mobile-first approach. )

Media concerns prevented this by allowing us to add breakpoints where the design could adapt. Like most people, I started out with three breakpoints: one for desktop, one for tablets, and one for mobile. Over the years, I added more and more for phablets, wide screens, and so on. 

For years, I happily worked this way and improved both my design and front-end skills in the process. The only problem I encountered was making changes to content, since with our Sass grid system in place, there was no way for the site owners to add content without amending the markup—something a small business owner might struggle with. This is because each row in the grid was defined using a div as a container. Adding content meant creating new row markup, which requires a level of HTML knowledge.

String premium was a mainstay of early flexible design, present in all the frequently used systems like Bootstrap and Skeleton.

 
1 of 7
 
2 of 7
 
3 of 7
 
4 of 7
 
5 of 7
 
6 of 7
 
7 of 7

Another difficulty arose as I moved from a design firm building websites for little- to medium-sized companies, to larger in-house teams where I worked across a collection of related sites. In those capacities, I began to work more with washable parts.

Our rely on multimedia queries resulted in parts that were tied to frequent window sizes. If the goal of part libraries is modify, then this is a real problem because you can just use these components if the devices you’re designing for correspond to the viewport sizes used in the pattern library—in the process never really hitting that “devices that don’t already occur” goal.

Then there’s the problem of space. Media concerns allow components to adapt based on the viewport size, but what if I put a component into a sidebar, like in the figure below?

Container queries: our savior or a false dawn?

Container queries have long been touted as an improvement upon media queries, but at the time of writing are unsupported in most browsers. There are workarounds for JavaScript, but they can lead to dependencies and compatibility issues. The basic theory underlying container queries is that elements should change based on the size of their parent container and not the viewport width, as seen in the following illustrations.

One of the biggest arguments in favor of container queries is that they help us create components or design patterns that are truly reusable because they can be picked up and placed anywhere in a layout. This is an important step in moving toward a form of component-based design that works at any size on any device.

In other words, responsive elements are meant to replace responsive layouts.

Container queries will help us move from designing pages that respond to the browser or device size to designing components that can be placed in a sidebar or in the main content, and respond accordingly.

My issue is that layout is still used to determine when a design needs to adapt. This approach will always be restrictive, as we will still need pre-defined breakpoints. For this reason, my main question with container queries is, How would we decide when to change the CSS used by a component?

The best place to make that choice is probably not a component library that is disconnected from context and real content.

As the diagrams below illustrate, we can use container queries to create designs for specific container widths, but what if I want to change the design based on the image size or ratio?

In this example, the dimensions of the container are not what should dictate the design, rather, the image is.

Without reliable cross-browser support for them, it’s difficult to say for certain whether container queries will be successful. Responsive component libraries would definitely evolve how we design and would improve the possibilities for reuse and design at scale. However, we might always need to modify these elements to fit our content.

CSS is changing

Whilst the container query debate rumbles on, there have been numerous advances in CSS that change the way we think about design. The days of fixed-width elements measured in pixels and floated div elements used to cobble layouts together are long gone, consigned to history along with table layouts. Flexbox and CSS Grid have revolutionized layouts for the web. We can now create elements that wrap onto new rows when they run out of space, not when the device changes.

.wrapper { display: grid; grid-template-columns: repeat(auto-fit, 450px); gap: 10px;}

The repeat() function paired with auto-fit or auto-fill allows us to specify how much space each column should use while leaving it up to the browser to decide when to spill the columns onto a new line. Similar things can be achieved with Flexbox, as elements can wrap over multiple rows and “flex” to fill available space. 

.wrapper { display: flex; flex-wrap: wrap; justify-content: space-between;}.child { flex-basis: 32%; margin-bottom: 20px;}

The biggest benefit of all of this is that you don’t have to wrap elements in container rows. Without rows, content isn’t tied to page markup in quite the same way, allowing for removals or additions of content without additional development.

This is a big step forward when it comes to creating designs that allow for evolving content, but the real game changer for flexible designs is CSS Subgrid.

Remember the days of crafting perfectly aligned interfaces, only for the customer to add an unbelievably long header almost as soon as they’re given CMS access, like the illustration below?

Subgrid allows elements to respond to adjustments in their own content and in the content of sibling elements, helping us create designs more resilient to change.

.wrapper { display: grid; grid-template-columns: repeat(auto-fit, minmax(150px, 1fr)); grid-template-rows: auto 1fr auto; gap: 10px;}.sub-grid { display: grid; grid-row: span 3; grid-template-rows: subgrid; /* sets rows to parent grid */}

CSS Grid allows us to separate layout and content, thereby enabling flexible designs. Meanwhile, Subgrid allows us to create designs that can adapt in order to suit morphing content. Subgrid is only supported by Firefox at the time of writing, but the above code can be implemented behind an @supports feature query.

Intrinsic layouts

I’d be remiss not to mention intrinsic layouts, a term used by Jen Simmons to describe a mix of contemporary and traditional CSS features to create layouts that respond to available space.

Responsive layouts have flexible columns using percentages. Intrinsic layouts, on the other hand, use the fr unit to create flexible columns that won’t ever shrink so much that they render the content illegible.

frunits is a statement that says I want you to distribute the extra space in this manner, but never that it should be smaller than the content inside.

—Jen Simmons,” Designing Intrinsic Layouts”

Intrinsic layouts can also make use of a mix of fixed and flexible units, letting the content choose how much space it occupies.

What makes intrinsic design stand out is that it not only creates designs that can withstand future devices but also helps scale design without losing flexibility. Without the requirement of having the same breakpoints or the same amount of content as in the previous implementation, components and patterns can be lifted and reused.

We can now create designs that adapt to the space they have, the content within them, and the content around them. We can create responsive components using an intrinsic approach without relying on container queries.

Another 2010 moment?

This intrinsic approach should in my view be every bit as groundbreaking as responsive web design was ten years ago. It’s another “everything changed” moment for me.

But it doesn’t seem to be moving quite as fast, I haven’t yet had that same career-changing moment I had with responsive design, despite the widely shared and brilliant talk that brought it to my attention.

One possible explanation for that might be that I now work for a sizable company, which is significantly different from the role I held as a design agency in 2010: In my agency days, every new project was a clean slate, a chance to try something new. Nowadays, projects use existing tools and frameworks and are often improvements to existing websites with an existing codebase.

Another possibility is that I now feel more prepared for change. In 2010 I was new to design in general, the shift was frightening and required a lot of learning. Additionally, an intrinsic approach isn’t exactly new; it’s a different way to use existing skills and CSS knowledge.

You can’t framework your way out of a content problem

Another reason for the slightly slower adoption of intrinsic design could be the lack of quick-fix framework solutions available to kick-start the change.

Ten years ago, responsive grid systems were everywhere. With a framework like Bootstrap or Skeleton, you had a responsive design template at your fingertips.

Because having a selection of units is a hindrance when creating layout templates, intrinsic design and frameworks do not work together quite as well. The beauty of intrinsic design is combining different units and experimenting with techniques to get the best for your content.

And then there are design tools. We probably all used Photoshop templates for desktop, tablet, and mobile devices to drop designs into and demonstrate how the site would look at all three stages at some point in our careers.

How do you do that now, with each component responding to content and layouts flexing as and when they need to? Personally, I’m a big fan of this kind of design in the browser.

The debate about “whether designers should code” is another that has rumbled on for years. When designing a digital product, we should, at the very least, design for a best- and worst-case scenario when it comes to content. It’s not ideal to implement this in a graphics-based software package. In code, we can add longer sentences, more radio buttons, and extra tabs, and watch in real time as the design adapts. Does it continue to function? Is the design too reliant on the current content?

Personally, I look forward to the day intrinsic design is the standard for design, when a design component can be truly flexible and adapt to both its space and content with no reliance on device or container dimensions.

First, the content

Content is not constant. After all, to design for the unanticipated or unexpected, we must take into account content modifications, such as the earlier Subgrid card example, which allowed the cards to adjust both their own content and that of their sibling elements.

Thankfully, there’s more to CSS than layout, and plenty of properties and values can help us put content first. Subgrid and pseudo-elements like ::first-line and ::first-letter help to separate design from markup so we can create designs that allow for changes.

Instead of dated markup tricks like this —

 First line of text with different styling...

—we can target content based on where it appears.

.element::first-line { font-size: 1.4em;}.element::first-letter { color: red;}

Much bigger additions to CSS include logical properties, which change the way we construct designs using logical dimensions (start and end) instead of physical ones (left and right), something CSS Grid also does with functions like min(), max(), and clamp().

This flexibility allows for directional changes according to content, a common requirement when we need to present content in multiple languages. In the past, this was often achieved with Sass mixins but was often limited to switching from left-to-right to right-to-left orientation.

Directional variables must be specified in the Sass version.

$direction: rtl;$opposite-direction: ltr;$start-direction: right;$end-direction: left;

These variables can be used as values—

body { direction: $direction; text-align: $start-direction;}

—or as real estate.

margin-#{$end-direction}: 10px;padding-#{$start-direction}: 10px;

However, now we have native logical properties, removing the reliance on both Sass ( or a similar tool ) and pre-planning that necessitated using variables throughout a codebase. These properties also start to break apart the tight coupling between a design and strict physical dimensions, creating more flexibility for changes in language and in direction.

margin-block-end: 10px;padding-block-start: 10px;

There are also native start and end values for properties like text-align, which means we can replace text-align: right with text-align: start.

Like the earlier examples, these properties help to build out designs that aren’t constrained to one language, the design will reflect the content’s needs.

Fluid and fixed

We briefly covered the power of combining fixed widths with fluid widths with intrinsic layouts. The min() and max() functions are a similar concept, allowing you to specify a fixed value with a flexible alternative. 

For min() this means setting a fluid minimum value and a maximum fixed value.

.element { width: min(50%, 300px);}

The element in the figure above will be 50 % of its container as long as the element’s width doesn’t exceed 300px.

For max() we can set a flexible max value and a minimum fixed value.

.element { width: max(50%, 300px);}

Now the element will be 50 % of its container as long as the element’s width is at least 300px. This means we can set limits but allow content to react to the available space.

The clamp() function builds on this by allowing us to set a preferred value with a third parameter. Now we can allow the element to shrink or grow if it needs to without getting to a point where it becomes unusable.

.element { width: clamp(300px, 50%, 600px);}

This time, the element’s width will be 50 % ( the preferred value ) of its container, with no exceptions for 300px and 600px.

With these techniques, we have a content-first approach to responsive design. We can separate content from markup, meaning the changes users make will not affect the design. By making plans for unanticipated changes in language or direction, we can begin to future-proof designs. And we can increase flexibility by setting desired dimensions alongside flexible alternatives, allowing for more or less content to be displayed correctly.

Situation first

Thanks to what we’ve discussed so far, we can cover device flexibility by changing our approach, designing around content and space instead of catering to devices. But what about that last bit of Jeffrey Zeldman’s quote,”… situations you haven’t imagined”?

It’s a lot different to design for someone using a mobile phone and walking through a crowded street in glaring sunshine than it is for someone using a desktop computer. Situations and environments are hard to plan for or predict because they change as people react to their own unique challenges and tasks.

This is why making a decision is so crucial. One size never fits all, so we need to design for multiple scenarios to create equal experiences for all our users.

Thankfully, there is a lot we can do to provide choice.

Responsible design

” There are parts of the world where mobile data is prohibitively expensive, and where there is little or no broadband infrastructure”.

” I Used the Web for a Day on a 50 MB Budget.”

Chris Ashton

One of the biggest assumptions we make is that people interacting with our designs have a good wifi connection and a wide screen monitor. However, our users may be commuters using smaller mobile devices that may experience disconnects in connectivity in the real world. There is nothing more frustrating than a web page that won’t load, but there are ways we can help users use less data or deal with sporadic connectivity.

The srcset attribute allows the browser to decide which image to serve. This means we can create smaller ‘cropped’ images to display on mobile devices in turn using less bandwidth and less data.

The preload attribute can also help us to think about how and when media is downloaded. It can be used to tell a browser about any critical assets that need to be downloaded with high priority, improving perceived performance and the user experience. 

There’s also native lazy loading, which indicates assets that should only be downloaded when they are needed.

With srcset, preload, and lazy loading, we can start to tailor a user’s experience based on the situation they find themselves in. What none of this does, however, is allow the user themselves to decide what they want downloaded, as the decision is usually the browser’s to make. 

So how can we put users in control?

The media queries are returning.

Media concerns have always been about much more than device sizes. They allow content to adapt to different situations, with screen size being just one of them.

We’ve long been able to check for media types like print and speech and features such as hover, resolution, and color. These checks allow us to provide options that suit more than one scenario, it’s less about one-size-fits-all and more about serving adaptable content.

The Level 5 spec for Media Queries is still being developed as of this writing. It introduces some really exciting queries that in the future will help us design for multiple other unexpected situations.

For instance, a light-level feature allows you to alter a user’s style when they are in the sun or in the dark. Paired with custom properties, these features allow us to quickly create designs or themes for specific environments.

@media (light-level: normal) { --background-color: #fff; --text-color: #0b0c0c; }@media (light-level: dim) { --background-color: #efd226; --text-color: #0b0c0c;}

Another key feature of the Level 5 spec is personalization. Instead of creating designs that are the same for everyone, users can choose what works for them. This is achieved by using features like prefers-reduced-data, prefers-color-scheme, and prefers-reduced-motion, the latter two of which already enjoy broad browser support. These features tap into preferences set via the operating system or browser so people don’t have to spend time making each site they visit more usable. 

Media concerns like this go beyond choices made by a browser to grant more control to the user.

Expect the unexpected

In the end, the one thing we should always anticipate is that things will change. Devices in particular change faster than we can keep up, with foldable screens already on the market.

We can design for content, but we can’t do it for this constantly changing landscape. By putting content first and allowing that content to adapt to whatever space surrounds it, we can create more robust, flexible designs that increase the longevity of our products.

A lot of the CSS discussed here is about moving away from layouts and putting content at the heart of design. There is a lot more we can do to adopt a more intrinsic approach, from responsive components to fixed and fluid units. Even better, we can test these techniques during the design phase by designing in-browser and watching how our designs adapt in real-time.

When it comes to unexpected circumstances, we need to make sure our goods are accessible whenever and wherever needed. We can move closer to achieving this by involving users in our design decisions, by creating choice via browsers, and by giving control to our users with user-preference-based media queries.

Good design for the unexpected should allow for change, provide choice, and give control to those we serve: our users themselves.

We’ve been conversing for a long time. Whether to present information, perform transactions, or just to check in on one another, people have yammered aside, chattering and gesticulating, through spoken discussion for many generations. Only recently have we begun to write our conversations, and only recently have we outsourced them to the system, a system that exhibits a far greater affection for written communications than for the vernacular rigors of spoken speech.

Laptops have trouble because between spoken and written speech, talk is more primitive. Machines must wrestle with the complexity of human statement, including the disfluencies and pauses, the gestures and body speech, and the variations in expression choice and spoken dialect, which may impede even the most skillfully crafted human-computer interaction. In the human-to-human situation, spoken language also has the opportunity of face-to-face call, where we can easily interpret verbal interpersonal cues.

In contrast, written language develops its own fossil record of dated terms and phrases as we report it and retain utilization long after they are no longer relevant in spoken communication ( for example, the welcome” To whom it may concern” ). Because it tends to be more consistent, smooth, and proper, written word is necessarily far easier for machines to interpret and know.

Spoken language is not a luxury in this regard. Besides the nonverbal cues that decorate conversations with emphasis and emotional context, there are also verbal cues and vocal behaviors that modulate conversation in nuanced ways: how something is said, not what. Our spoken language reaches far beyond what the written word can ever deliver, whether it’s rapid-fire, low-pitched, high-decibel, sarcastic, stilted, or sighing. So when it comes to voice interfaces—the machines we conduct spoken conversations with—we face exciting challenges as designers and content strategists.

Voice-to-text interactions

We interact with voice interfaces for a variety of reasons, but according to Michael McTear, Zoraida Callejas, and David Griol in The Conversational Interface, those motivations by and large mirror the reasons we initiate conversations with other people, too ( ). We typically strike up a discussion by:

• we need something done ( such as a transaction ),
• we want to know something, some kind of information, or
• we are social beings and want someone to talk to ( conversation for conversation’s sake ).

These three categories, which I refer to as transactional, informational, and prosocial, also apply to essentially every voice interaction: a single conversation that starts with the voice interface’s first greeting and ends with the user leaving the interface. Note here that a conversation in our human sense—a chat between people that leads to some result and lasts an arbitrary length of time—could encompass multiple transactional, informational, and prosocial voice interactions in succession. In other words, a voice interaction is a conversation, but it is not always just one voice interaction.

Purely prosocial conversations are more gimmicky than captivating in most voice interfaces, because machines don’t yet have the capacity to really want to know how we’re doing and to do the sort of glad-handing humans crave. Additionally, there is ongoing debate about whether users actually prefer the type of organic human conversation that starts with a prosocial voice and progresses seamlessly into new ones. In fact, in Voice User Interface Design, Michael Cohen, James Giangola, and Jennifer Balogh recommend sticking to users ‘ expectations by mimicking how they interact with other voice interfaces rather than trying too hard to be human—potentially alienating them in the process ( ).

That leaves two different types of conversations we can have with one another that a voice interface can also have easily, including one that is transactional and one that is informational, teaching us something new ( “discuss a musical” ).

Transactional voice interactions

When you order a Hawaiian pizza with extra pineapple, you’re typically having a conversation and a voice interaction when you’re tapping buttons on a food delivery app. Even when we walk up to the counter and place an order, the conversation quickly pivots from an initial smattering of neighborly small talk to the real mission at hand: ordering a pizza ( generously topped with pineapple, as it should be ).

How are things going, Alison?

Burhan: Hi, welcome to Crust Deluxe! It’s chilly outside. How can I help you?

Alison: Can I get a pizza from Hawaii with extra pineapple.

Burhan: Sure, what size?

Alison: Big.

Burhan: Anything else?

Alison: No, that’s it.

Burhan: Something to drink?

Alison, I’ll have a bottle of Coke.

Burhan: You got it. That will cost$ 13.55 and take about fifteen minutes.

Each progressive disclosure in this transactional conversation reveals more and more of the desired outcome of the transaction: a service rendered or a product delivered. Transactional conversations exhibit a few key characteristics: they’re direct, to the point, and economical. They quickly dispense with pleasantries.

Informational voice interactions

Meanwhile, some conversations are primarily about obtaining information. Alison might only want to place an order at Crust Deluxe, but she might not want to leave without a pizza at all. She might be just as interested in whether they serve halal or kosher dishes, gluten-free options, or something else. Even though we have a prosocial mini-conversation once more at the beginning to practice politeness, we are after much more.

How are things going, Alison?

Burhan: Hi, welcome to Crust Deluxe! It’s chilly outside. How can I help you?

Alison: Can I ask a few questions?

Burhan: Of course! Go right ahead.

Do you have any halal options available on the menu, Alison?

Burhan: Absolutely! On request, we can make any pie halal. We also have lots of vegetarian, ovo-lacto, and vegan options. Do you have any other dietary restrictions in mind?

Alison: What about gluten-free pizzas?

Burhan: For both our deep-dish and thin-crust pizzas, we can definitely make a gluten-free crust for you. Anything else I can answer for you?

Alison: That’s it for now. Good to know. Thank you!

Burhan: Anytime, come back soon!

This dialogue is entirely different. Here, the goal is to get a certain set of facts. Informational conversations are research expeditions that seek the truth through information gathering. Voice interactions that are informational might be more long-winded than transactional conversations by necessity. Responses are typically longer, more in-depth, and carefully communicated so that the customer is aware of the important lessons.

Voice Interfaces

Voice interfaces essentially use speech to assist users in accomplishing their objectives. But simply because an interface has a voice component doesn’t mean that every user interaction with it is mediated through voice. We’re most concerned with pure voice interfaces, which depend entirely on spoken conversation and lack any visual component, making multimodal voice interfaces much more nuanced and challenging to deal with because they can lean on visual components like screens as crutches.

Though voice interfaces have long been integral to the imagined future of humanity in science fiction, only recently have those lofty visions become fully realized in genuine voice interfaces.

IVR ( interactive voice response ) systems

Though written conversational interfaces have been fixtures of computing for many decades, voice interfaces first emerged in the early 1990s with text-to-speech ( TTS ) dictation programs that recited written text aloud, as well as speech-enabled in-car systems that gave directions to a user-provided address. We became familiar with the first real voice interfaces that could actually be spoken with the help of interactive voice response ( IVR ) systems, which were developed as an alternative to overburdened customer service representatives.

IVR systems allowed organizations to reduce their reliance on call centers but soon became notorious for their clunkiness. Similar to the corporate world, these systems were primarily created as metaphorical switchboards to direct customers to a real phone agent (” Say Reservations to book a flight or check an itinerary” ), and chances are you’ll have a conversation with one when you call an airline or hotel conglomerate. Despite their functional issues and users ‘ frustration with their inability to speak to an actual human right away, IVR systems proliferated in the early 1990s across a variety of industries (, PDF).

IVR systems have a reputation for having less scintillating conversations than we’re used to in real life ( or even in science fiction ), despite being extremely repetitive and monotonous.

Screen readers

The screen reader, a program that converts visual information into synthesized speech, was a development that accompanied the development of IVR systems. For Blind or visually impaired website users, it’s the predominant method of interacting with text, multimedia, or form elements. Perhaps the closest thing we have today to an out-of-the-box delivery of content via voice is represented by screen readers.

Among the first screen readers known by that moniker was the Screen Reader for the BBC Micro and NEEC Portable developed by the Research Centre for the Education of the Visually Handicapped (RCEVH) at the University of Birmingham in 1986 ( ). The first IBM Screen Reader for text-based computers was created by Jim Thatcher in the same year, which was later recreated for a computer with graphical user interfaces ( GUIs ) ( ).

With the rapid growth of the web in the 1990s, the demand for accessible tools for websites exploded. Screen readers started facilitating quick interactions with web pages that ostensibly allow disabled users to traverse the page as an aural and temporal space rather than a visual and physical one with the introduction of semantic HTML and especially ARIA roles in 2008, enabling speedy interactions with the pages. In other words, screen readers for the web “provide mechanisms that translate visual design constructs—proximity, proportion, etc. in A List Apart, writes Aaron Gustafson, “into useful information.” ” At least they do when documents are authored thoughtfully” ( ).

Although incredibly instructive for voice interface designers, screen readers have a major flaw: they’re challenging to use and consistently verbose. The visual structures of websites and web navigation don’t translate well to screen readers, sometimes resulting in unwieldy pronouncements that name every manipulable HTML element and announce every formatting change. Working with web-based interfaces takes a cognitive toll for many screen reader users.

In Wired, accessibility advocate and voice engineer Chris Maury considers why the screen reader experience is ill-suited to users relying on voice:

I hated the way Screen Readers operated from the beginning. Why are they designed the way they are? It makes no sense to present information visually and then only to have that information translated into audio. All of the time and energy that goes into creating the perfect user experience for an app is wasted, or even worse, adversely impacting the experience for blind users. __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In many cases, well-designed voice interfaces can speed users to their destination better than long-winded screen reader monologues. After all, users of the visual interface have the advantage of freely scurrying around the viewport to find information, ignoring areas that are unimportant to them. Blind users, meanwhile, are obligated to listen to every utterance synthesized into speech and therefore prize brevity and efficiency. Users with disabilities who have long had no choice but to use clumsy screen readers might find that voice interfaces, especially more contemporary voice assistants, provide a more streamlined experience.

Voice assistants

Many of us immediately associate voice assistants with the subset of voice interfaces that are now commonplace in living rooms, smart homes, and offices with the film HAL from 2001: A Space Odyssey or Majel Barrett’s voice as the omniscient computer in Star Trek. Voice assistants are akin to personal concierges that can answer questions, schedule appointments, conduct searches, and perform other common day-to-day tasks. And they’re quickly gaining more attention from accessibility advocates for their assistive potential.

Before the earliest IVR systems found success in the enterprise, Apple published a demonstration video in 1987 depicting the Knowledge Navigator, a voice assistant that could transcribe spoken words and recognize human speech to a great degree of accuracy. Then, in 2001, Tim Berners-Lee and others created their vision for a” semantic web agent” that would carry out routine tasks like” checking calendars, making appointments, and finding locations” ( hinter paywall ). It wasn’t until 2011 that Apple’s Siri finally entered the picture, making voice assistants a tangible reality for consumers.

There are a lot of variations in the programmability and customization of some voice assistants compared to others ( Fig. 1 ). As a result of the breadth of voice assistants available today ( Fig. 1 ). At one extreme, everything except vendor-provided features is locked down, for example, at the time of their release, the core functionality of Apple’s Siri and Microsoft’s Cortana couldn’t be extended beyond their existing capabilities. There are no other means by which developers can interact with Siri at a low level, aside from predefined categories of tasks like sending messages, hailing rideshares, making restaurant reservations, and other things, so even now it isn’t possible to program Siri to perform arbitrary functions.

At the opposite end of the spectrum, voice assistants like Amazon Alexa and Google Home offer a core foundation on which developers can build custom voice interfaces. For this reason, developers who feel stifled by the limitations of Siri and Cortana are increasingly using programmable voice assistants that allow for customization and extensibility. Amazon offers the Alexa Skills Kit, a developer framework for building custom voice interfaces for Amazon Alexa, while Google Home offers the ability to program arbitrary Google Assistant skills. Users of the Amazon Alexa and Google Assistant ecosystems can choose from among the thousands of custom-built skills available today.

As businesses like Amazon, Apple, Microsoft, and Google continue to dominate their markets, they are also selling and open-sourcing an unmatched range of tools and frameworks for designers and developers, aiming to make creating voice interfaces as simple as possible, even without the use of any code.

Often by necessity, voice assistants like Amazon Alexa tend to be monochannel—they’re tightly coupled to a device and can’t be accessed on a computer or smartphone instead. In contrast, many development platforms, such as Google’s Dialogflow, have omnichannel capabilities that allow users to create a single conversational interface that then manifests as a voice interface, textual chatbot, and IVR system upon deployment. I don’t prescribe any specific implementation approaches in this design-focused book, but in Chapter 4 we’ll get into some of the implications these variables might have on the way you build out your design artifacts.

Voice content

Simply put, voice content is content delivered through voice. Voice content must be free-flowing and organic, contextless and concise—everything written content isn’t enough to preserve what makes human conversation so compelling in the first place.

Our world is replete with voice content in various forms: screen readers reciting website content, voice assistants rattling off a weather forecast, and automated phone hotline responses governed by IVR systems. We’re most concerned with the audiobook content being delivered as a requirement rather than an option.

For many of us, our first foray into informational voice interfaces will be to deliver content to users. There is only one issue: any content we already have isn’t in any way suitable for this new environment. So how do we make the content trapped on our websites more conversational? And how do we create fresh copy that works with voice-recognition?

Lately, we’ve begun slicing and dicing our content in unprecedented ways. Websites are, in many ways, massive vaults of what I call macrocontent: lengthy prose that can last for miles in a browser window while extending like microfilm viewers of newspaper archives. Back in 2002, well before the present-day ubiquity of voice assistants, technologist Anil Dash defined microcontent as permalinked pieces of content that stay legible regardless of environment, such as email or text messages:

An example of microcontent can be a day’s weather forecast [sic], an airplane flight’s arrival and departure times, an abstract from a lengthy publication, or a single instant message. __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I would update Dash’s definition of microcontent to include all instances of bite-sized content that goes beyond written communiqués. After all, today we encounter microcontent in interfaces where a small snippet of copy is displayed alone, unmoored from the browser, like a textbot confirmation of a restaurant reservation. The best way to learn how your content can be stretched to the limits of its potential is through microcontent, which will inform both established and new delivery channels.

As microcontent, voice content is unique because it’s an example of how content is experienced in time rather than in space. We can instantly see when the next train is coming from a digital sign underground, but voice interfaces keep our attention captive for so long that we can’t quickly evade or skip, a feature that screen reader users are all too familiar with.

Because microcontent is fundamentally made up of isolated blobs with no relation to the channels where they’ll eventually end up, we need to ensure that our microcontent truly performs well as voice content—and that means focusing on the two most important traits of robust voice content: voice content legibility and voice content discoverability.

Our voice content’s legibility and discoverability in general both depend on how it manifests in terms of perceived space and time.

Many wealthy runners had come to the conclusion that it was impossible to run a mile in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

But on May 6, 1956, Roger Bannister caught all off guard. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world today knew that the four-minute hour could be accomplished thanks to this change in the criterion. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Therefore, in the same race, three athletes managed to cross the four-minute challenge together. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We do a lot more when we think something is possible, and we only think it can be done when we see someone else doing it once more. As for man running speed, we also think there are strict guidelines for how a website should do.

Establishing requirements for a green website

The key indicators of climate performance in most big sectors are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. However, we aren’t held to any specific environmental standards in the world of websites and apps, and we only recently have access to the tools and techniques we need to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the amount of CO₂ that a website item produces. We didn’t measure the pollutants coming out of the exhaust valves on our laptops. The pollution coming from power plants that burn coal and oil are considerably away, out of sight, and out of mind. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon pollution, therefore we need to get what we can measure. The following are the main elements that could be used as coal pollution gauges:

1. Transfer of data
2. Electricity’s coal power

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a wonderful example of how much energy is consumed and how much carbon is released. As a rule of thumb, the more files transferred, the more electricity used in the data center, telecoms systems, and end users products.

The easiest way to calculate data transfer for a single visit for web pages is to measure the page weight, which is the page’s transfer size in kilobytes when someone first visits the page. It’s fairly easy to measure using the developer tools in any modern web browser. Statistics for the total data transfer of any web application are frequently included in your web hosting account ( Fig. 2.1 ).

The nice thing about page weight as a metric is that it allows us to compare the efficiency of web pages on a level playing field without confusing the issue with constantly changing traffic volumes.

A large scope is necessary to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for roughly half of this data transfer, making them the single biggest contributor to carbon emissions on a typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While most technologies, including the underlying technology of the web like data centers and transmission networks, become more and more energy efficient, websites themselves become less effective as time goes on.

You might be aware of the project team’s focus on creating faster user experiences using the concept of performance budgeting. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than vague suggestions, much like speed limits while driving, so the goal should always be to come in within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use the page weight to compare it to competitors or the outdated website we’re replacing. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

If we want to take it to the next level, we could start looking at how much more popular our web pages are when people visit them frequently. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, visitors who load the same page more frequently are likely to have a high percentage of the files cached in their browser, which means they don’t need to move all the files on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. Moving away from the first visit and allowing us to determine page weight budgets for scenarios other than this one can help us learn even more about how to optimize efficiency for users who regularly visit our pages.

Page weight budgets are easy to track throughout a design and development process. Although they don’t directly disclose carbon emissions and energy consumption data, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of lowering web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Electricity’s coal power

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” (gCO₂/k Wh ) is used to describe how much carbon dioxide is produced for each kilowatt-hour of electricity produced. This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, where different levels of carbon intensity are combined with energy from a variety of sources. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will have significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

However, we don’t want to move our servers too far away from our users because it requires a lot of energy to transmit data through the telecom’s networks, and the more energy is used, the further the data travels. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and determine the distance between that location and the data center that our hosting company uses as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how significantly lessening the distance and energy needed to transmit the data would be if it was hosted somewhere in North America, ideally on the West Coast. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. The method my team developed converts the data transferred over wire when loading a website into a CO₂ figure ( Fig. ₂.4), calculating the associated electricity, and then converting that data into a figure ( Fig. ₂.4). It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to take it one step further and tailor the data more precisely to the unique aspects of your project.

We could even expand our page weight budget by establishing carbon budgets as well with the ability to calculate carbon emissions for our projects. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds an air of abstraction, carbon budgets do focus our minds on the main issue we’re trying to reduce, which also supports the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational burden is increasingly shifting from the data center to the users ‘ devices, whether they are phones, tablets, laptops, desktops, or even smart TVs, as front-end web technologies advance. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React make it possible to create applications where the” thinking” process is performed either partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more computation in a web browser requires more energy to be used by the user’s devices. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally exclude those who have older, slower devices and make the batteries on phones and laptops drain more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. The poorest members of society are also under disproportionate financial burdens due to this, which is not just bad for the environment.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the Safari browser’s developer console ( Fig. 2.5 ) is one of the tools we currently use.

You know when your computer’s cooling fans start spinning so frantically that you suspect it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating and shows the percentage of CPU used and how long the CPU used when loading the web page last. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

This book will provide you with that plan of action. It covers how to incorporate safety principles into your design work in order to make tech that’s secure, how to persuade your stakeholders that this work is important, and how to respond to the critique that what we really need is more diversity. ( Spoiler: we do, but diversity alone is not the solution to fixing unethical, unsafe technology. )

The method for equitable safety

Your objectives when designing for protection are as follows:

• discover ways your solution can be used for abuse,
• style ways to prevent the maltreatment, and
• offer assistance for users who are prone to regain control and power.

The Process for Inclusive Safety is a tool to help you reach those goals ( Fig 5.1 ). I developed this strategy in 2018 to better understand the different methods I used to create products that were designed with safety in mind. Whether you are creating an entirely new product or adding to an existing element, the Process can help you produce your product secure and diverse. The Process includes five public areas of action:

• conducting studies
• Creating themes
• Pondering issues
• Designing answers
• Testing for health

It is intended to be flexible, so teams might not want to utilize every action in all circumstances. Use the parts that are related to your special function and environment, this is meant to be something you can put into your existing style process.

And once you use it, if you have an idea for making it better or simply want to give perspective of how it helped your staff, please get in touch with me. It’s a dwelling report that I hope technicians can use as a practical and useful resource in their day-to-day work.

If you’re working on a product especially for a resilient team or survivors of some form of injury, such as an application for survivors of domestic violence, sexual abuse, or drug addiction, be sure to read Section 7, which covers that position directly and should be handled a bit different. The principles set forth here are for putting safety first when creating a more general product with a broad user base ( which, as we already know from statistics, will include some groups that should be protected from harm ). Chapter 7 is focused on products that are specifically for vulnerable groups and people who have experienced trauma.

Step 1: Conduct research

Design research should include a thorough analysis of how your technology might be used for abuse as well as specific insights into the experiences of those who have witnessed and perpetrated that kind of abuse. At this stage, you and your team will investigate issues of interpersonal harm and abuse, and explore any other safety, security, or inclusivity issues that might be a concern for your product or service, like data security, racist algorithms, and harassment.

broad research

Your project should begin with broad, general research into similar products and issues around safety and ethical concerns that have already been reported. For example, a team building a smart home device would do well to understand the multitude of ways that existing smart home devices have been used as tools of abuse. If you’re creating an AI product, be aware of the potential for racism and other issues that have been reported in other AI products. Nearly all types of technology have some kind of potential or actual harm that’s been reported on in the news or written about by academics. Google Scholar is a useful resource for locating these studies.

Specific research: Survivors

When possible and appropriate, include direct research ( surveys and interviews ) with people who are experts in the forms of harm you have uncovered. In order to gain a better understanding of the subject and avoid retraumatizing survivors, you should first interview those who work in the area of your research. If you’ve uncovered possible domestic violence issues, for example, the experts you’ll want to speak with are survivors themselves, as well as workers at domestic violence hotlines, shelters, other related nonprofits, and lawyers.

It is crucial to pay people for their knowledge and lived experiences, especially when interviewing survivors of any kind of trauma. Don’t ask survivors to share their trauma for free, as this is exploitative. While some survivors may not want to be paid, you should always make the offer in the initial ask. Alternative to paying is to donate to a cause fighting the kind of violence the interviewee experienced. We’ll talk more about how to appropriately interview survivors in Chapter 6.

Abusers specific research

It’s unlikely that teams aiming to design for safety will be able to interview self-proclaimed abusers or people who have broken laws around things like hacking. Don’t make this a goal, rather, try to get at this angle in your general research. Attempt to understand how abusers or bad actors use technology to harm others, how they use it against others, and how they justify or explain the abuse.

Step 2: Create archetypes

Use your research after you’ve finished conducting it to create abuser and survivor archetypes. Archetypes are not personas, as they’re not based on real people that you interviewed and surveyed. Instead, they’re based on your research into likely safety issues, much like when we design for accessibility: we don’t need to have found a group of blind or low-vision users in our interview pool to create a design that’s inclusive of them. Instead, we base those designs on already-existing research to satisfy the requirements of this audience. Personas typically represent real users and include many details, while archetypes are broader and can be more generalized.

The abuser archetype is defined as someone who views a product as a means of harm ( Fig. 5.2 ). They may be trying to harm someone they don’t know through surveillance or anonymous harassment, or they may be trying to control, monitor, abuse, or torment someone they know personally.

Someone who is being abused with the product is the survivor archetype. There are various situations to consider in terms of the archetype’s understanding of the abuse and how to put an end to it: Do they need proof of abuse they already suspect is happening, or are they unaware they’ve been targeted in the first place and need to be alerted ( Fig 5.3 )?

You may want to make multiple survivor archetypes to capture a range of different experiences. They may be aware of the abuse being occurring but not be able to stop it, such as when a stalker keeps tracing their whereabouts or when an abuser locks them out of IoT devices ( Fig. 5.4). Include as many of these scenarios as you need to in your survivor archetype. These suggestions will be used later when creating solutions to assist your survivor archetypes in achieving their objectives of preventing and ending abuse.

It may be useful for you to create persona-like artifacts for your archetypes, such as the three examples shown. Focus on their objectives rather than the demographic details we frequently see in personas. The goals of the abuser will be to carry out the specific abuse you’ve identified, while the goals of the survivor will be to prevent abuse, understand that abuse is happening, make ongoing abuse stop, or regain control over the technology that’s being used for abuse. Later, you’ll think about how to help the survivor’s goals and the abuser’s goals.

And while the “abuser/survivor” model fits most cases, it doesn’t fit all, so modify it as you need to. For example, if you uncovered an issue with security, such as the ability for someone to hack into a home camera system and talk to children, the malicious hacker would get the abuser archetype and the child’s parents would get survivor archetype.

Step 3: Remind yourself of your issues

After creating archetypes, brainstorm novel abuse cases and safety issues. You’re trying to identify entirely new safety issues that are unique to your product or service by using the term” Novel” in terms of things you’ve not found in your research. The goal with this step is to exhaust every effort of identifying harms your product could cause. You aren’t worrying about how to prevent the harm yet—that comes in the next step.

What other abuses could your product be used for besides what you’ve already discovered through your research? I recommend setting aside at least a few hours with your team for this process.

Try conducting a Black Mirror brainstorming session if you want to start somewhere. This exercise is based on the show Black Mirror, which features stories about the dark possibilities of technology. Try to figure out how your product would be used in an episode of the show—the most wild, awful, out-of-control ways it could be used for harm. Participants in Black Mirror brainstorming typically end up having a lot of fun ( which I believe is great because having fun when designing for safety! ). I recommend time-boxing a Black Mirror brainstorm to half an hour, and then dialing it back and using the rest of the time thinking of more realistic forms of harm.

After identifying as many opportunities for abuse as you can, you may still not feel confident that you have found every potential source of harm. A healthy amount of anxiety is normal when you’re doing this kind of work. It’s common for teams designing for safety to worry,” Have we really identified every possible harm? What if something is missing, then? If you’ve spent at least four hours coming up with ways your product could be used for harm and have run out of ideas, go to the next step.

It’s impossible to say 100 % assurance that you’ve done everything, but instead of aiming for 100 %, acknowledge that you’ve done it and will continue to prioritize safety in the future. Once your product is released, your users may identify new issues that you missed, aim to receive that feedback graciously and course-correct quickly.

Step 4: Design solutions

You should now be able to identify potential harm-causing uses for your product as well as survivor and abuser archetypes describing opposing user objectives. The next step is to identify ways to design against the identified abuser’s goals and to support the survivor’s goals. This is a good idea to include this one alongside other areas of your design process where you’re offering solutions to the various issues your research has identified.

Some questions to ask yourself to help prevent harm and support your archetypes include:

• Can you design your product in such a way that the identified harm cannot happen in the first place? What barriers can you place to stop the harm from occurring if not?
• How can you make the victim aware that abuse is happening through your product?
• How can you explain to the victim what they must do to stop the problem?
• Can you identify any types of user activity that would indicate some form of harm or abuse? Could your product help the user access support?

In some products, it’s possible to proactively detect harm that is occurring. For example, a pregnancy app might be modified to allow the user to report that they were the victim of an assault, which could trigger an offer to receive resources for local and national organizations. Although this kind of proactiveness is not always possible, it’s worthwhile to spend a half hour talking about how your product could help the user receive help in a safe manner if any kind of user activity would indicate some form of harm or abuse.

That said, use caution: you don’t want to do anything that could put a user in harm’s way if their devices are being monitored. If you do offer some kind of proactive help, always make it voluntary, and think through other safety issues, such as the need to keep the user in-app in case an abuser is checking their search history. In the next chapter, we’ll walk through a good illustration of this.

Step 5: Test for safety

The final step is to evaluate your prototypes from the perspective of your archetypes, who wants to harm the product and the victim of the harm who needs to regain control over the technology. Just like any other kind of product testing, at this point you’ll aim to rigorously test out your safety solutions so that you can identify gaps and correct them, validate that your designs will help keep your users safe, and feel more confident releasing your product into the world.

Ideally, safety testing happens along with usability testing. If you work for a company that doesn’t conduct usability testing, you might be able to use safety testing to deftly perform both. A user who uses your design while trying to use it against someone else can also be encouraged to point out interactions or other design details that don’t make sense.

You’ll want to conduct safety testing on either your final prototype or the actual product if it’s already been released. It’s okay to test an existing product that wasn’t created with safety goals in mind right away; “etrofitting” it for safety is a good thing.

Remember that testing for safety involves testing from the perspective of both an abuser and a survivor, though it may not make sense for you to do both. Alternatively, if you made multiple survivor archetypes to capture multiple scenarios, you’ll want to test from the perspective of each one.

You as the designer are probably too closely acquainted with the product and its design at this point, just like other usability testing techniques, and you know the product too well. Instead of doing it yourself, set up testing as you would with other usability testing: find someone who is not familiar with the product and its design, set the scene, give them a task, encourage them to think out loud, and observe how they attempt to complete it.

testing for abuse

The goal of this testing is to understand how easy it is for someone to weaponize your product for harm. Unlike with usability testing, you want to make it impossible, or at least difficult, for them to achieve their goal. Use your product in an effort to accomplish the objectives in the abuser archetype you created earlier.

For example, for a fitness app with GPS-enabled location features, we can imagine that the abuser archetype would have the goal of figuring out where his ex-girlfriend now lives. With this in mind, you’d make every effort to discover the location of a different user who has their privacy settings turned on. You might try to see her running routes, view any available information on her profile, view anything available about her location ( which she has set to private ), and investigate the profiles of any other users somehow connected with her account, such as her followers.

If by the end of this you’ve managed to uncover some of her location data, despite her having set her profile to private, you know now that your product enables stalking. Reverting to step 4 and figuring out how to stop this from occurring is your next step. You may need to repeat the process of designing solutions and testing them more than once.

Survivor testing

Survivor testing involves identifying how to give information and power to the survivor. It might not always make sense based on the product or context. The survivor archetype’s goal of not being stalked is satisfied by preventing an attempt by an abuser archetype to stalk someone, so separate testing from the survivor’s perspective wouldn’t be required.

However, there are cases where it makes sense. For instance, a survivor archetype’s goal would be to discover who or what causes the temperature to change when they aren’t altering it themselves. You could test this by looking for the thermostat’s history log and checking for usernames, actions, and times, if you couldn’t find that information, you would have more work to do in step 4.

Another goal might be regaining control of the thermostat once the survivor realizes the abuser is remotely changing its settings. Are there any instructions that explain how to remove a user and change the password, and are they simple to find? For your test, you would need to try to figure out how to do this. This might again reveal that more work is needed to make it clear to the user how they can regain control of the device or account.

Stress testing

To make your product more inclusive and compassionate, consider adding stress testing. This concept comes from Design for Real Life by Eric Meyer and Sara Wachter-Boettcher. The authors noted that personas typically focus on happy people, but happy people are frequently anxious, stressed, unhappy, or even tragic. These are called” stress cases”, and testing your products for users in stress-case situations can help you identify places where your design lacks compassion. More information about how to incorporate stress cases into your design can be found in Design for Real Life, as well as in many other effective methods for designing with compassion.

But how can a content management system ( CMS ) be set up to reach your current and future audience? I learned the hard way that creating a content model—a concept of information types, attributes, and relationships that let people and systems understand content—with my more comfortable design-system wondering would collapse my patient’s holistic information strategy. By developing content versions that are conceptual and even join related content, you can avoid that result.

I just had the opportunity to direct the CMS application for a Fortune 500 company. The customer was excited by the benefits of an holistic information plan, including material modify, multichannel marketing, and robot delivery—designing content to be comprehensible to bots, Google knowledge panels, snippets, and voice user interfaces.

For our information to be understood by many systems, the unit needed conceptual types, which are names given based on their meaning rather than their presentation. This is crucial for an multichannel content strategy. Our aim was to allow writers to write articles and use it where necessary. But as the job proceeded, I realized that supporting material utilize at the range that my client needed required the whole group to identify a new pattern.

Despite our best efforts, we remained influenced by what we were more familiar with: design systems. An omnichannel content strategy cannot rely on WYSIWYG design and layout tools, unlike web-focused content strategies. Our tendency to approach the content model with our familiar design-system thinking constantly led us to veer away from one of the primary purposes of a content model: delivering content to audiences on multiple marketing channels.

Two fundamental tenets must be followed in order to create a successful content model

We had to explain to our designers, developers, and stakeholders that their previous web projects had taught them that content should be treated as visual building blocks that fit into layouts. The previous approach was not only more familiar but also more intuitive—at least at first—because it made the designs feel more tangible. We learned two guiding principles that helped the team understand how a content model and the design processes we were familiar with were:

1. Instead of layout, semantics must be used by content models.
2. And content models should connect content that belongs together.

Semantic content models

A semantic content model uses type and attribute names that reflect the content’s intended purpose and not its intended display. For example, in a nonsemantic model, teams might create types like teasers, media blocks, and cards. These types may make it simple to present content, but they do not aid in understanding the meaning of the content, which would have opened the door to the content presented in each marketing channel. To allow each delivery channel to comprehend the content and use it as it sees fit, a semantic content model uses type names like product, service, and testimonial.

When you’re creating a semantic content model, a great place to start is to look over the types and properties defined by Schema. a community-driven resource for type definitions that are understandable on platforms like Google search.

A semantic content model has a number of advantages:

Even if your team doesn’t care about omnichannel content, a semantic content model decouples content from its presentation so that teams can evolve the website’s design without needing to refactor its content. Content can withstand obtrusive website redesigns in this way.
• A semantic content model also gives you a competitive advantage. By adding structured data based on Schema. A website can provide hints to Google to understand the content, display it in search snippets or knowledge panels, and use it to respond to user voice-interface queries. Potential customers could access your content without ever visiting your website.
• Beyond those practical benefits, you’ll also need a semantic content model if you want to deliver omnichannel content. Delivery channels must be able to comprehend the same content in order to use it across multiple marketing channels. For instance, if your content model provided a list of questions and answers, it could be easily displayed on a frequently asked questions ( FAQ ) page as well, but it could also be used by a bot that answers frequently asked questions.

For example, using a semantic content model for articles, events, people, and locations lets A List Apart provide cleanly structured data for search engines so that users can read the content on the website, in Google knowledge panels, and even with hypothetical voice interfaces in the future.

connective content models

Instead of slicing up related content across disparate content components, I’ve come to the realization that the best models are those that are semantic and also connect related content components ( such as a FAQ item’s question and answer pair ). A good content model connects content that should remain together so that multiple delivery channels can use it without needing to first put those pieces back together.

Consider creating an essay or article. The unity of an article’s parts determines its meaning and usefulness. Would one of the headings or paragraphs be meaningful on their own without the context of the full article? Our well-versed in designing systems frequently led us to want to develop content models that would break content into smaller pieces to fit the web-centric layout. This had a similar effect to an article that had its headline removed. Because we were slicing content into standalone pieces based on layout, content that belonged together became difficult to manage and nearly impossible for multiple delivery channels to understand.

Let’s take a look at how connecting related content works in a real-world setting to illustrate. A complex layout for a software product page that included multiple tabs and sections was presented by the client’s design team. Our instincts were to follow suit with the content model. Shouldn’t we make adding multiple tabs in the future as simple and flexible as possible?

Because our design-system instincts were so well-known, it appeared that we needed a “tab section” content type so that multiple tab sections could be added to a page. Each tab section would display various types of content. One tab might contain the software’s information or specifications. A list of resources might be found under another tab.

Our inclination to break down the content model into “tab section” pieces would have led to an unnecessarily complex model and a cumbersome editing experience, and it would have also created content that couldn’t have been understood by additional delivery channels. How would another system have resorted to counting tab sections and content blocks, for instance, if it had been able to identify a product’s “tab section” when referring to its specifications or resource list? This would have prevented the tabs from ever being rearranged, and it would have required adding logic to each other delivery channel to interpret the layout of the design system. Furthermore, if the customer were to have no longer wanted to display this content in a tab layout, it would have been tedious to migrate to a new content model to reflect the new page redesign.

Our customer had a breakthrough when we realized that for each tab, their customer had a specific purpose in mind: it would reveal specific information like the software product’s overview, specifications, related resources, and pricing. Once implementation began, our inclination to focus on what’s visual and familiar had obscured the intent of the designs. It wasn’t long after a little digging that it became clear that the idea of tabs wasn’t applicable to the content model. What was important was the meaning of the information that they intended to display in the tabs.

In fact, the customer could have decided to display this content in a different way—without tabs—somewhere else. In response to this realization, we decided to create content types for the software product based on the meaningful qualities the client wanted to display on the web. There were both obvious semantic attributes like name and description and rich ones like screenshots, software requirements, and feature lists. The software’s product information stayed together because it wasn’t sliced across separate components like “tab sections” that were derived from the content’s presentation. Any delivery channel, including those that follow, could comprehend and display this content.

Conclusion

In this omnichannel marketing project, we discovered that the best way to keep our content model on track was to ensure that it was semantic ( with type and attribute names that reflected the meaning of the content ) and that it kept content together that belonged together ( instead of fragmenting it ). These two ideas made it easier for us to decide what to do with the content model based on the design. Remember: If you’re developing a content model to support an omnichannel content strategy, or even if you just want to make sure Google and other interfaces understand your content, keep in mind:

• A design system isn’t a content model. You should maintain the semantic value and contextual structure of the content strategy throughout the entire implementation process because team members might be drawn to conflate them and force your content model to resemble your design system. This will enable each delivery channel to consume the content without the need for a magic decoder ring.
• If your team is struggling to make this transition, you can still reap some of the benefits by using Schema. Your website uses structured data from org. The advantage of search engine optimization is a compelling argument on its own, even if additional delivery channels are not in the works.
• Additionally, remind the team that decoupling the content model from the design will let them update the designs more easily because they won’t be held back by the cost of content migrations. They’ll be able to create new designs without compromising the compatibility between the content and the design, and they’ll be prepared for the upcoming big thing.

By firmly defending these ideas, you’ll help your team view content as the most important component of your user experience and as the most effective way to engage with your audience.

Do you find yourself designing screens with only a vague idea of how the things on the screen relate to the things elsewhere in the system? Do you leave stakeholder meetings with unclear directives that often seem to contradict previous conversations? You know a better understanding of user needs would help the team get clear on what you are actually trying to accomplish, but time and budget for research is tight. When it comes to asking for more direct contact with your users, you might feel like poor Oliver Twist, timidly asking, “Please, sir, I want some more.” 

Here’s the trick. You need to get stakeholders themselves to identify high-risk assumptions and hidden complexity, so that they become just as motivated as you to get answers from users. Basically, you need to make them think it’s their idea. 

In this article, I’ll show you how to collaboratively expose misalignment and gaps in the team’s shared understanding by bringing the team together around two simple questions:

1. What are the objects?
2. What are the relationships between those objects?

A gauntlet between research and screen design

These two questions align to the first two steps of the ORCA process, which might become your new best friend when it comes to reducing guesswork. Wait, what’s ORCA?! Glad you asked.

ORCA stands for Objects, Relationships, CTAs, and Attributes, and it outlines a process for creating solid object-oriented user experiences. Object-oriented UX is my design philosophy. ORCA is an iterative methodology for synthesizing user research into an elegant structural foundation to support screen and interaction design. OOUX and ORCA have made my work as a UX designer more collaborative, effective, efficient, fun, strategic, and meaningful.

The ORCA process has four iterative rounds and a whopping fifteen steps. In each round we get more clarity on our Os, Rs, Cs, and As.

I sometimes say that ORCA is a “garbage in, garbage out” process. To ensure that the testable prototype produced in the final round actually tests well, the process needs to be fed by good research. But if you don’t have a ton of research, the beginning of the ORCA process serves another purpose: it helps you sell the need for research.

In other words, the ORCA process serves as a gauntlet between research and design. With good research, you can gracefully ride the killer whale from research into design. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It begins to expose what this classic comic so beautifully illustrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. And this is also why we often can’t sell research: every decision-maker is confident in their own mental picture. 

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

But how we do this is important. However much we might want to, we can’t just tell everyone, “YOU ARE WRONG!” Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders take ownership of assumptions and gaps in understanding, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Say your users are doctors. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying: “We need to understand doctors better! What are their pain points? How do they use the current app?” But here’s the problem with that. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This is more like the kind of conversation you need to facilitate. Let’s listen in:

“Wait a sec, how often do doctors share patients? Does a patient in this system have primary and secondary doctors?”

“Can a patient even have more than one primary doctor?”

“Is it a ‘primary doctor’ or just a ‘primary caregiver’… Can’t that role be a nurse practitioner?”

“No, caregivers are something else… That’s the patient’s family contacts, right?”

“So are caregivers in scope for this redesign?”

“Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment?”

Now we are getting somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? The diabolical goal here is to shake their confidence—gently and diplomatically.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And this will, hands down, result in a more confusing, more complex, and less intuitive software product.

The two questions

But how do we get to these kinds of meaty questions diplomatically, efficiently, collaboratively, and reliably? 

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the objects?
2. What are the relationships between those objects?

In practice, getting to these answers is easier said than done. I’m going to show you how these two simple questions can provide the outline for an Object Definition Workshop. During this workshop, these “seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Prep work: Noun foraging

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders (and entire cross-functional team, hopefully). But first, you need to do some prep work.

Basically, look for nouns that are particular to the business or industry of your project, and do it across at least a few sources. I call this noun foraging.

Here are just a few great noun foraging sources:

• the product’s marketing site
• the product’s competitors’ marketing sites (competitive analysis, anyone?)
• the existing product (look at labels!)
• user interview transcripts
• notes from stakeholder interviews or vision docs from stakeholders

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. If all you have is a marketing website, some screenshots of the existing legacy system, and access to customer service chat logs, then use those.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them (preferably on blue sticky notes if you’ll be creating an object map later!).

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Think of a library app, for example. Is “book” an object?

Structure: can you think of a few attributes for this potential object? Title, author, publish date… Yep, it has structure. Check!

Instance: what are some examples of this potential “book” object? Can you name a few? The Alchemist, Ready Player One, Everybody Poops… OK, check!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library… Check, check, check!

As you are noun foraging, focus on capturing the nouns that have SIP. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is coming to your digital place to play with your dropdown! They are coming for the VALUABLE THINGS and what they can do with them. Those things, or objects, are what we are trying to identify.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

First I’d look at my own email client, which happens to be Gmail. I’d then look at Outlook and the new HEY email. I’d look at Yahoo, Hotmail…I’d even look at Slack and Basecamp and other so-called “email replacers.” I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

(Before moving on, feel free to go noun foraging for this hypothetical product, too, and then scroll down to see how much our lists match up. Just don’t get lost in your own emails! Come back to me!)

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact groups
• attachment
• Google doc file / other integrated file
• newsletter? (HEY treats this differently)
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. In our email example, it might be client or automation. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: here are some real nouns foraged during my own past project work that I needed my stakeholders to help me understand:

• Record Locator
• Incentive Home
• Augmented Line Item
• Curriculum-Based Measurement Probe

This is really all you need to prepare for the workshop session: a list of nouns that represent potential objects and a short list of nouns that need to be defined further.

Facilitate an Object Definition Workshop

You could actually start your workshop with noun foraging—this activity can be done collaboratively. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Affinity mapping is your friend here!

If your team is short on time and might be reluctant to do this kind of grunt work (which is usually the case) do your own noun foraging beforehand, but be prepared to show your work. I love presenting screenshots of documents and screens with all the nouns already highlighted. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. You don’t need to let them know that you’re looking for gaps in the team’s understanding so that you can prove the need for more user research—that will be our little secret. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers. 

Then, let the question whack-a-mole commence.

1. What is this thing?

Want to have some real fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Then, have everyone show their cards at the same time and see if you get different definitions (you will). This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty emerges, quietly (but visibly) start an “open questions” parking lot. 😉

After definitions solidify, here’s a great follow-up:

2. Do our users know what these things are? What do users call this thing?

Stakeholder 1: They probably call email clients “apps.” But I’m not sure.

Stakeholder 2: Automations are often called “workflows,” I think. Or, maybe users think workflows are something different.

If a more user-friendly term emerges, ask the group if they can agree to use only that term moving forward. This way, the team can better align to the users’ language and mindset.

OK, moving on. 

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Are these the same thing? Or are these different? If they are not the same, how are they different?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Definitely.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images. 

Continue to build out your growing glossary of objects. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Are saved responses and templates related in any way?

Stakeholder 3:  Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? Does that happen when the user is constructing the saved response? Or when they apply the saved response to an email? How does that actually work?

Listen. Capture uncertainty. Once the list of “open questions” grows to a critical mass, pause to start assigning questions to groups or individuals. Some questions might be for the dev team (hopefully at least one developer is in the room with you). One question might be specifically for someone who couldn’t make it to the workshop. And many questions will need to be labeled “user.” 

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next question narrows the team’s focus toward what’s most important to your users. You can simply ask, “Are saved responses in scope for our first release?,” but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to sort these objects from most to least important, either in small breakout groups or individually. Then, like you did with the definitions, have everyone reveal their sort order at once. Surprisingly—or not so surprisingly—it’s not unusual for the VP to rank something like “saved responses” as #2 while everyone else puts it at the bottom of the list. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. We posted the three groups’ wildly different sort orders on the whiteboard.

The CEO stood back, looked at it, and said, “This is why we haven’t been able to move forward in two years.”

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects’ relationships

We’ve already done a bit of this while trying to determine if two things are different, but this time, ask the team about every potential relationship. For each object, ask how it relates to all the other objects. In what ways are the objects connected? To visualize all the connections, pull out your trusty boxes-and-arrows technique. Here, we are connecting our objects with verbs. I like to keep my verbs to simple “has a” and “has many” statements.

This system modeling activity brings up all sorts of new questions:

• Can a saved response have attachments?
• Can a saved response use a template? If so, if an email uses a saved response with a template, can the user override that template?
• Do users want to see all the emails they sent that included a particular attachment? For example, “show me all the emails I sent with ProfessionalImage.jpg attached. I’ve changed my professional photo and I want to alert everyone to update it.” 

Solid answers might emerge directly from the workshop participants. Great! Capture that new shared understanding. But when uncertainty surfaces, continue to add questions to your growing parking lot.

Light the fuse

You’ve positioned the explosives all along the floodgates. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Before your workshop wraps up, have the group reflect on the list of open questions. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

Here’s your final step. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out?” 

With this methodology, we are cornering our decision-makers into advocating for user research as they themselves label questions as high-risk. Sorry, not sorry. 

Now is your moment of truth. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions. 

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions are open-ended and don’t lead the user into any default answers.

Final words: Hold the screen design!

Seriously, if at all possible, do not ever design screens again without first answering these fundamental questions: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and (it almost feels like a bonus at this point!) users will be more receptive to what you put out into the world. 

I sincerely hope this helps you win time and budget to go talk to your users and gain clarity on what you are designing before you start building screens. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots. 

All the best of luck! Now go sell research!

Cartons are used to style CSS. In fact, the whole website is made of containers, from the computer viewport to components on a webpage. However, there are times when we have a fresh element that forces us to reevaluate our design strategy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. Additionally, double screen or portable devices force us to reevaluate how to best make the most of the available space in a variety of different device positions.

The design of products has become more challenging and interesting as a result of new changes to the online platform. They’re wonderful opportunities for us to break out of our triangular containers.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Democratic Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they are flexible, linkable, and stable, just like websites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it can be challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What a standard pc PWA app looks like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color house ), but that’s about it.

What if we could look beyond this field and reclaim the entire screen of the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

This is exactly what the Window Controls Overlay provides. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and screen controls

Let’s get started with an explanation of the screen and title bar settings.

The title bar is the place displayed at the top of an game windows, which frequently contains the phone’s name. The buttons or buttons that are displayed at the top of an app’s window allow you to lessen, increase, or close it.

Window Controls Overlay removes the actual requirement of the name bar and windows controls areas. It frees up the entire game window’s height, allowing the overlay of the subject club and window control buttons on top of the application’s web content.

If you are reading this article on a desktop computer, get a quick glance at another software. Prospects are they’re currently doing something similar to this. In fact, the internet browser you are using uses the major area to show tabs.

Spotify’s application window’s top edge is where the album artwork appears.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience across a variety of platforms without having a negative impact on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using only CSS and a single HTML element in this straightforward CSS playground.

The app has two pages. The first lists your existing CSS designs:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on the desktop because I added a straightforward web manifest and service worker. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area reached the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

Enabling Window Controls Overlay

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been implemented in Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of Window Controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing we need to change is this manifest change, which will make the title bar disappear and convert the window controls into an overlay.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

Here is how the app currently looks:

Our logo, search field, and NEW button are now partially covered by the window controls, but the title bar has been removed, which is what we wanted. Our layout now begins at the top of the window.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been added in addition to the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. In our case, we’ll position our header, which includes the logo, search bar, and NEW button, using two of the variables.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The app appears much more like a native app.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are a few ways to define it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in various ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

Here is the method we’ll employ:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can use the Window Controls Overlay feature to move the window, but this area becomes limited to where the control buttons are, and they must very precisely aim between these buttons to move the window. However, the title bar offers a sizable area for users to click and drag.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to animate any aspect of the app so that the window can drag it toward any point:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. Let’s take a different approach, then. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be with the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. The search field, logo, and button would need to be pushed down a little bit if the user made the window very narrow.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

The API offers three intriguing features:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangelets us know when the visibility or size change.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• We can see the title bar area across different operating systems, which is great because the window controls ‘ size is different on Mac and Windows. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can move the header down using the above CSS code to avoid hitting the window control buttons, and we can also lower the thumbnails accordingly.

Thirty pixels of exciting design opportunities

We were able to convert our simple demo app to something that felt much more connected to desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room, and it presents challenges for using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. To make it easier for us web authors to integrate more and more fully with those devices, new features are added to the web platform. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. Nowadays, web building enables us to think outside the rectangular box.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

You can open issues on the spec’s repository if you get the chance to try the Window Controls Overlay feature and have feedback on it. It’s still early in the development of this feature, and you can help make it even better. You can also check out this demo app and its source code, or the feature’s existing documentation.

However, we’re still very far from this perfect.

At the time, I didn’t realize yet how to functionally combine morality. Yes, I had found some tools that had worked for me in past projects, such as using checklists, notion monitoring, and “dark truth” sessions, but I didn’t manage to use those in every task. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I decided to dig deeper for the main causes in firm that prevent us from practicing regular social style. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine morality. And it’s unexpectedly easy! But first we need to move out to get a better understanding of what we’re up against.

Control the system

Unfortunately, we’re trapped in a capitalist structure that reinforces materialism and inequality, and it’s obsessed with the dream of infinite growth. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Over the last years, those goals have twisted our well-intended human-centered mentality into a powerful system that promotes ever-higher levels of consumption. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. Yet with our best intentions, and even though we like to suggest that we create solutions for people, we’re a part of the problem.

What can we do to alter this?

We can begin by acting on the appropriate level of the system. Donella H. Meadows, a system scholar, previously listed ways to influence a system in order of success. When you apply these to architecture, you get:

At the lowest level of effectiveness, you can change numbers such as accessibility scores or the number of layout critiques. But none of that will change the direction of a company.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• Focusing instead on feedback loops such as management control, employee recognition, or design-system investments can help a company become better at achieving its objectives. But that doesn’t change the objectives themselves, which means that the organization will still work against your ethical-design ideals.
• The next level, information flows, is what most ethical-design initiatives focus on now: the exchange of ethical methods, toolkits, articles, conferences, workshops, and so on. This is also where ethical design has remained mostly theoretical. We’ve been focusing on the wrong level of the system all this time.
• Take rules, for example—they beat knowledge every time. There can be widely accepted rules, such as how finance works, or a scrum team’s definition of done. But ethical design can also be smothered by unofficial rules meant to maintain profits, often revealed through comments such as” the client didn’t ask for it” or “don’t make it too big”.
• Changing the rules without holding official power is very hard. That’s why the next level is so influential: self-organization. Experimentation, bottom-up initiatives, passion projects, self-steering teams—all of these are examples of self-organization that improve the resilience and creativity of a company. It’s exactly this diversity of viewpoints that’s needed to structurally tackle big systemic issues like consumerism, wealth inequality, and climate change.
• Yet even stronger than self-organization are objectives and metrics. Our companies want to make more money, which means that everything and everyone in the company does their best to… make the company more money. And once I realized that profit is nothing more than a measurement, I understood how crucial a very specific, defined metric can be toward pushing a company in a certain direction.

The takeaway? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

But in our hearts, we all know that the three dimensions aren’t equally weighted: it’s viability that ultimately controls whether a product will go live. So a more realistic representation might look like this:

Desirability and feasibility are the means, viability is the goal. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. So both feasibility and viability are means to achieve what the company set out to achieve. It makes intuitive sense: to achieve most anything, you need resources, people, and money. ( Fun fact: the Italian language knows no difference between feasibility and viability, both are simply fattibilità. )

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. Desirability objectives, such as user satisfaction or conversion, don’t consider whether a product is healthy for people. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They’re unsuitable for establishing a healthy balance with nature.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. Many similar models exist, some calling the fourth dimension accountability, integrity, or responsibility. What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There’s no one way to do this because it highly depends on your culture, values, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

Pursue well-being, equity, and sustainability

We created objectives that address design’s effect on three levels: individual, societal, and global.

An objective on the individual level tells us what success is beyond the typical focus of usability and satisfaction—instead considering matters such as how much time and attention is required from users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are calm, transparent, nonaddictive, and nonmisleading. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

An objective on the societal level forces us to consider our impact beyond just the user, widening our attention to the economy, communities, and other indirect stakeholders. We called this objective equity:

We create products and services that have a positive social impact. We consider economic equality, racial justice, and the inclusivity and diversity of people as teams, users, and customer segments. We listen to local culture, communities, and those we affect.

Finally, the objective on the global level aims to ensure that we remain in balance with the only home we have as humanity. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our solutions support the circular economy: we create value from waste, repurpose products, and prioritize sustainable choices. We deliver functionality instead of ownership, and we limit energy use.

In short, ethical design ( to us ) meant achieving wellbeing for each user and an equitable value distribution within society through a design that can be sustained by our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

But defining these objectives still isn’t enough. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

This overview lists example metrics that you can use as you pursue well-being, equity, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. Donella Meadows once shared this example:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not produce national security”.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if instead we measured success through metrics for ( digital ) well-being, such as ( reduced ) screen time or software energy consumption?

There’s another important message here. Even if we set an objective to build a calm interface, if we were to choose the wrong metric for calmness—say, the number of interface elements—we could still end up with a screen that induces anxiety. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. Once you go through the exercise of choosing metrics for our objectives, you’re forced to consider what success looks like concretely and how you can prove that you’ve reached your ethical objectives. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The answer to this question brings a lot of clarity and focus.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. It” simply” becomes a matter of using your creativity and choosing from all the knowledge and toolkits already available to you.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Should you go with that energy-consuming video or would a simple illustration be enough? Which typeface is the most calm and inclusive? Which new tools and methods do you use? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How do you make sure that those who are affected by decisions are there when those decisions are made? How can you measure our effects?

The redefinition of success will completely change what it means to do good design.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Kick it off or fall back to status quo

The kickoff is the most important meeting that can be so easy to forget to include. It consists of two major phases: 1 ) the alignment of expectations, and 2 ) the definition of success.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Assumptions are raised and discussed. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For example, for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication, we conducted an online kickoff with the client, a subject-matter expert, and two other designers. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. But just as important as expressing expectations is agreeing on what success means for the project—in terms of desirability, viability, feasibility, and ethics. What are the objectives in each dimension?

Agreement on what success means at such an early stage is crucial because you can rely on it for the remainder of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. ” As we agreed in our first meeting, having a diverse user group that includes A and B is necessary to build a successful product. So we do activity X and follow research process Y”. Compare those odds to a situation in which the team didn’t agree to that beforehand and had to ask for permission halfway through the project. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. It consists of an inner ring, meant to capture ideas for objectives, and a set of outer rings, meant to capture ideas on how to measure those objectives. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We went through each dimension, writing down ideas on digital sticky notes. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. And the subject-matter expert emphasized the importance of including students from low-income and disadvantaged groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s origin and purpose: why are we doing this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• the scope, process, and role descriptions: how will we achieve it?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

Over the past year, quite a few colleagues have asked me,” Where do I start with ethical design”? My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. If you want to be an ethical, responsible designer, there’s no skipping this step.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you consider yourself a system designer, your starting point is to understand how your industry contributes to consumerism and inequality, understand how finance drives business, and brainstorm which levers are available to influence the system on the highest level. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Instead, gather your colleagues and define goals for well-being, equity, and sustainability through design. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Take their input, make it concrete and visible, ask for their agreement, and hold them to it.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my colleagues expressed doubts such as” What will the client think of this”?,” Will they take me seriously”?, and “Can’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It’s a tempting idea, right? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

But as systems theory tells us, that’s not enough. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t remain within the design-for-designers bubble, enjoying our privileged working-from-home situation, disconnected from the real world out there. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. We need to actively engage our colleagues and clients by challenging them to redefine success in business.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We just need to agree on the right objectives at the start of each design project, find the right metrics, and realize that we already have everything that we need to get started. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.