Blog

However, we’re still very far from this best.

At the time, I didn’t realize yet how to functionally combine morality. Yes, I did discover some tools in past projects that had worked for me, such as using checklists, notion monitoring, and “dark fact” sessions, but I wasn’t able to use them in every task. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I made a deeper investigation into the causes of business failure that prevent us from practicing social style every day. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine morality. And it’s remarkably easy! However, we must second move out to understand what we’re up against.

Control the system

Unfortunately, we are confined to a capitalist system that fosters consumerism and inequality and is obsessed with the utopian dream of infinite development. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Our well-meaning human-centered attitude has been transformed into a powerful device that encourages ever-higher levels of consumption over the past ten years due to these objectives. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. Yet with our best motives, and despite the fact that we like to claim that we provide solutions for people, we’re a part of the issue.

What can we do to alter this?

We may begin by acting on the appropriate level of the system. A technique thinker named Donna H. Meadows after outlined ways to influence a system in terms of effectiveness. When you apply these to architecture, you get:

You can influence things like usability ratings or the number of design critiques at the least effective level. But none of that may change the direction of a business.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• Instead of focusing on feedback loops like control power, employee reputation, or design-system investments, a company can become more effective at achieving its goals. But that doesn’t alter the goals themselves, which means that the business may also work against your ethical-design ideals.
• Most ethical-design efforts’ current focus is on the exchange of honest techniques, toolkits, articles, conferences, workshops, and other topics. This is also where social style has remained largely theoretical. We’ve been focusing on the wrong level of the system all this day.
• Consider rules, for instance; they consistently surpass information. There can be commonly accepted guidelines, such as how fund works, or a sprint group’s concept of done. However, illegal laws intended to maintain income, frequently revealed through comments like” the customer didn’t ask for it” or “don’t make it too big” can smother social style.
• Changing the rules without holding official energy is extremely difficult. That’s why the next stage is thus important: self-organization. Research, bottom-up initiatives, love projects, self-steering teams, and other such self-organization techniques all contribute to a company’s resilience and creativity. It’s precisely this diversity of viewpoints that’s needed to functionally address major structural issues like materialism, money injustice, and climate change.
• But goals and measures are even more powerful than self-organization. Our businesses want to make more money, which means that everything and everyone in the business does their best to… make the company more money. And when I realized that income is nothing more than a measurement, I understood how important a very particular, defined measurement may be toward pushing a company in a specific direction.

What is the conclusion? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

However, we all know that the three dimensions are not equally important: viability is ultimately what determines whether a product will become operational. So a more realistic representation might look like this:

The means are feasibility and desire, and viability is the aim. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. Therefore, both feasibility and viability are effective means of achieving the company’s goals. It makes intuitive sense: to achieve most anything, you need resources, people, and money. Fun fact: the Italian language does not distinguish between viability and feasibility; both are merely fattibilità.

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. When it comes to a product’s desirability goals, such as user satisfaction or conversion, don’t take into account whether it is good for people. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They are unsuitable for striking a healthy balance with the natural world.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. There are many variations of these models, some calling them “imputability, integrity, or responsibility.” What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There is no single way to accomplish this because it depends greatly on your country’s values, culture, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

pursue equity, sustainability, and well-being.

We created objectives that address design’s effect on three levels: individual, societal, and global.

An individual’s goal on the individual level clarifies what success entails in contrast to the typical user-centric focus on usability and satisfaction, taking into account factors like how much time and effort are required of users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are non-misleading, transparent, non-addictive, and non-misleading. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

A societal goal requires us to consider our impact beyond the mere user, widening our focus to the economy, communities, and other involuntary parties. We called this objective equity:

We create products and services that have a positive social impact. We think of racial justice, inclusiveness and diversity of people as teams, users, and customer segments as indicators of economic equality. We listen to local culture, communities, and those we affect.

Finally, the global goal of maintaining harmony with humanity’s sole home is the ultimate goal. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our products are repurposed, given, and given priority to making sustainable choices in order to support the circular economy. We deliver functionality instead of ownership, and we limit energy use.

In essence, ethical design ( to us ) meant achieving the wellbeing of each user and an equitable value distribution within society through a design that can sustain our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

However, defining these goals is still insufficient. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

In this overview, you can use examples of metrics to measure your progress toward equity, well-being, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. This example was once provided by Donella Meadows:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not lead to national security.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if we instead used metrics for ( digital ) well-being, like ( reduced ) screen time or software energy consumption, to measure success?

There’s another important message here. If we were to choose the wrong metric for calmness, such as the number of interface elements, we might still end up with a screen that makes us anxious, even if we set an objective to create a calm interface. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. When you perform the task of selecting metrics for our goals, you are made to consider what success looks like in terms of words and how you can demonstrate that you have met your ethical goals. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The response to this query provides a lot of focus and clarity.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. It” simply” becomes a matter of using your imagination and sifting through the knowledge and tools that are already at your disposal.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Would a simple illustration suffice, or should you go with that energizing video? Which typeface is the most calm and inclusive? What brand-new equipment and techniques do you employ? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How can you ensure that those who are affected by decisions are present when they are made? How can you measure our effects?

The definition of success will fundamentally alter what doing good design entails.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Kick it off or return to the pre-existing

The kickoff is the most important meeting that can be so easy to forget to include. It consists of two main steps: 1 ) the alignment of expectations and 2 ) the definition of success.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Discussion and assumptions are raised. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For instance, we conducted an online kickoff with the client, a subject-matter expert, and two other designers for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. However, agreeing on the project’s success means having respect for its desirability, viability, feasibility, and ethics is just as crucial as expressing expectations. What are the objectives in each dimension?

It’s crucial to reach an understanding of what success means at this early stage because you can depend on it for the duration of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. As we agreed in our first meeting, having a diverse user group that includes A and B is essential to creating a successful product. So we do activity X and follow research process Y”. Compare those odds to a situation where the team had to ask for permission halfway through the project and didn’t agree to it in advance. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. A set of outer rings is used to measure the objectives, as well as an inner ring that is intended to capture ideas for those objectives. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We explored each dimension and recorded ideas on digital sticky notes. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. Additionally, the subject-matter expert stressed the value of involving students from underprivileged and low-income groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s history and purpose: Why do we work on this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• how will we go about defining the scope, procedure, and role descriptions?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

How do I get started with ethical design, many of my coworkers have questioned me over the past year? My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. There is no skipping this step if you want to design in an ethical, responsible way.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you think of yourself as a system designer, your first step should be to understand how your industry contributes to consumerism and inequality, how finance drives business, and how to think about how to use the system to exert the most influence. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Gather your coworkers to set design goals for sustainability, well-being, and equity. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Take their ideas, make them clear and tangible, ask for their consent, and hold them to it.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my coworkers had questions to ask, such as” Will they take this seriously”?,” Will they take it seriously?” and “Can’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It’s a tempting thought, isn’t it? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

That’s not enough, as systems theory suggests, though. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t allow ourselves to be disconnected from the real world and enjoy our preferred working-from-home lifestyle while remaining trapped in the design-for-design bubble. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. By challenging them to redefine success in business, we must actively engage with our coworkers and clients.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We simply need to come to terms with the right goals at the start of each design project, identify the appropriate metrics, and acknowledge that we already have everything we need to get started. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.

The mobile-first style approach is fantastic because it concentrates on what is most important to the consumer, it’s well-practiced, and it’s a well-known style design for years. But developing your CSS mobile-first should also be wonderful, too…right?

Well, not necessarily. Classic mobile-first CSS development is based on the principle of overwriting style declarations: you begin your CSS with default style declarations, and overwrite and/or add new styles as you add breakpoints with min-width media queries for larger viewports (for a good overview see “What is Mobile First CSS and Why Does It Rock?”). But all those exceptions create complexity and inefficiency, which in turn can lead to an increased testing effort and a code base that’s harder to maintain. Admit it—how many of us willingly want that?

Mobile-first CSS may yet be the best option for your own projects, but you need to first determine how acceptable it is in light of the physical design and user interactions you’re working on. To help you get started, here’s how I go about tackling the elements you need to watch for, and I’ll discuss some alternative remedies if mobile-first doesn’t seem to fit your job.

merits of mobile-first technology

Some of the benefits of mobile-first CSS growth, and why it has been the de facto growth practice for so long, make a lot of sense:

Development order. A good development hierarchy is one thing you definitely get from mobile-first; you just concentrate on the cellular view and start developing.

tested and verified. It’s a tried and tested technique that’s worked for years for a cause: it solves a problem actually also.

prioritizes the smart see. The mobile view is the simplest and arguably the most significant because it covers all the crucial user journeys and frequently accounts for a higher proportion of user visits ( depending on the project ) ).

Stops desktop-centric growth. It can be tempting to first focus on the desktop perspective because desktop computers are used for growth. No one wants to spend their time retrofitting a desktop-centric website to function on mobile devices, but thinking about smart right away keeps us from getting stuck later on!

Drawbacks of mobile-first

Model declarations can be set at lower breakpoints and therefore overwritten at higher breakpoints:

more complicated. The farther up the target order you go, the more unnecessary script you inherit from lower thresholds.

higher CSS sensitivity A group name declaration’s default style has then a higher specificity that has been returned to the browser’s default value. This can be a pain on big projects when you want to preserve the CSS candidates as simple as possible.

Needs more regression analysis. All higher thresholds must be regression tested if changes to CSS at a lower see ( such as adding a new style ) are to be made.

The browser can’t prioritize CSS downloads. At wider breakpoints, classic mobile-first min-width media queries don’t leverage the browser’s capability to download CSS files in priority order.

Home price issue is overruled by the issue.

There is nothing inherently wrong with overwriting beliefs, CSS was designed to do just that. Even so, inheriting wrong values may be laborious and ineffective. When you have to replace styles to restore them to their defaults, which may cause issues after, especially if you are using a combination of bespoke CSS and power classes, it can also lead to more fashion precision. We won’t be able to use a power school for a design that has been restore with a higher precision.

With this in mind, I’m developing CSS with a focus on the default values much more these days. Since there’s no specific order, and no chains of specific values to keep track of, this frees me to develop breakpoints simultaneously. I concentrate on finding common styles and isolating the specific exceptions in closed media query ranges (that is, any range with a max-width set). 

As you can view each target as a blank slate, this technique opens up some opportunities. It’s acceptable and can be coded in the default style plate if a product’s structure appears to be based on Flexbox at all thresholds. But if it looks like Grid would be much better for large panels and Flexbox for portable, these can both be done entirely freely when the CSS is put into finished media keyword ranges. Additionally, developing simultaneously requires you to have a thorough understanding of any given component in all breakpoints right away. This can help identify design flaws earlier in the development process. We don’t want to get stuck down a rabbit hole building a complex component for mobile, and then get the designs for desktop and find they are equally complex and incompatible with the HTML we created for the mobile view!

Although this strategy won’t work for everyone, I urge you to try it. There are plenty of resources available to support concurrent development, including Responsively App, Blisk, and many others.

Having said that, I don’t feel the order itself is particularly relevant. Stick to the classic development order if you like to concentrate on the mobile view, understand the requirements for other breakpoints, and prefer to work on multiple devices at once. The key is to find common styles and exceptions so that you can include them in the appropriate stylesheet, which is a manual tree-shaking procedure! Personally, I find this a little easier when working on a component across breakpoints, but that’s by no means a requirement.

In practice, closed media query ranges

We overwrite the styles in the classic mobile-first CSS, but we can prevent this by using media query ranges. To illustrate the difference ( I’m using SCSS for brevity ), let’s assume there are three visual designs:

• smaller than 768
• from 768 to less than 1024
• 1024 and anything larger

Take a simple example where a block-level element has a default padding of “20px,” which is overwritten at tablet to be “40px” and set back to “20px” on desktop.

.my-block { padding: 20px; @media (min-width: 768px) { padding: 40px; } @media (min-width: 1024px) { padding: 20px; }}

.my-block { padding: 20px; @media (min-width: 768px) and (max-width: 1023.98px) { padding: 40px; }}

The subtle difference is that the mobile-first example sets the default padding to “20px” and then overwrites it at each breakpoint, setting it three times in total. In contrast, the second example sets the default padding to “20px” and only overrides it at the relevant breakpoint where it isn’t the default value (in this instance, tablet is the exception).

The goal is to: 

• Only set styles when needed. 
• Not set them with the expectation of overwriting them later on, again and again. 

To this end, closed media query ranges are our best friend. If we need to make a change to any given view, we make it in the CSS media query range that applies to the specific breakpoint. We’ll be much less likely to introduce unwanted alterations, and our regression testing only needs to focus on the breakpoint we have actually edited. 

Taking the above example, if we find that .my-block spacing on desktop is already accounted for by the margin at that breakpoint, and since we want to remove the padding altogether, we could do this by setting the mobile padding in a closed media query range.

.my-block {  @media (max-width: 767.98px) {    padding: 20px;  }  @media (min-width: 768px) and (max-width: 1023.98px) {    padding: 40px;  }}

The browser default padding for our block is “0,” so instead of adding a desktop media query and using unset or “0” for the padding value (which we would need with mobile-first), we can wrap the mobile padding in a closed media query (since it is now also an exception) so it won’t get picked up at wider breakpoints. At the desktop breakpoint, we won’t need to set any padding style, as we want the browser default value.

Bundling versus separating the CSS

Back in the day, keeping the number of requests to a minimum was very important because the browser's concurrent request limit (typically around six ) was high. In consequence, using image sprites and CSS bundling was the norm, with all the CSS being downloaded as a single stylesheet with the highest priority.

With HTTP/2 and HTTP/3 now on the scene, the number of requests is no longer the big deal it used to be. By using a media query, we can break CSS into several files. The obvious benefit of this is that the browser can now request the CSS it currently requires with a higher priority than the CSS it doesn't. This is more performant and can reduce the overall time page rendering is blocked.

What version of HTTP do you use?

Go to your website and open your browser's dev tools to find out which version of HTTP you're using. Next, select the Network tab and make sure the Protocol column is visible. If "h2" is included in the protocol list, that indicates that HTTP/2 is being used.

Note: To check the Protocol column in your browser's dev tools, right-click any column header ( such as Name ), go to the Network tab, reload your page, and then check the Protocol column.

Also, if your website is still using HTTP/1... WHY?! What are you waiting for? The HTTP/2 user support is excellent.

splitting the CSS

Separating the CSS into individual files is a worthwhile task. Linking the separate CSS files using the relevant media attribute allows the browser to identify which files are needed immediately (because they’re render-blocking) and which can be deferred. Based on this, it allocates each file an appropriate priority.

In the following example of a website visited on a mobile breakpoint, we can see the mobile and default CSS are loaded with" Highest" priority, as they are currently needed to render the page. The last three CSS files ( print, tablet, and desktop ) are still being downloaded in case they need to be later, but with" Lowest" priority.

Before rendering can begin, the browser will need to download and parse the CSS file when using bundled CSS.

While, as noted, with the CSS separated into different files linked and marked up with the relevant media attribute, the browser can prioritize the files it currently needs. Using closed media query ranges allows the browser to do this at all widths, as opposed to classic mobile-first min-width queries, where the desktop browser would have to download all the CSS with Highest priority. We can’t assume that desktop users always have a fast connection. For instance, in many rural areas, internet connection speeds are still slow. 

Depending on project requirements, the media queries and the number of separate CSS files will vary from project to project, but the example below might look similar.

Depending on the project’s deployment strategy, a change to one file (mobile.css, for example) would only require the QA team to regression test on devices in that specific media query range. Compare that to the prospect of deploying the single bundled site.css file, an approach that would normally trigger a full regression test.

Moving on

The adoption of mobile-first CSS was a significant milestone in web development because it allowed front-end developers to concentrate on mobile web applications rather than creating websites for desktop use and attempting to retrofit them to work on other devices.

I don't think anyone wants to return to that development model again, but it's important we don't lose sight of the issue it highlighted: that things can easily get convoluted and less efficient if we prioritize one particular device—any device—over others. For this reason, it seems natural to concentrate on the CSS in its own right, keeping an eye on both the default setting and the exceptions. I've started to notice subtle simplifications in the CSS I write for myself as well as other developers, and that the testing and maintenance work is also a little more organized and effective.

In general, simplifying CSS rule creation whenever we can is ultimately a cleaner approach than going around in circles of overrides. However, the project must fit the methodology you choose. Mobile-first may turn out to be the best option for the situation at hand, but first you need to fully comprehend the trade-offs you're entering.

In today’s data-driven environment, it’s becoming more common for a UX expert to be asked to create a personal digital experience, whether it be a common website, consumer portal, or native application. However while there continues to be no lack of marketing buzz around personalization systems, we also have very few defined approaches for implementing personalized UX.

That’s where we begin. After completing tens of personalisation projects over the past few years, we gave ourselves a purpose: could you make a systematic personalization platform especially for UX practitioners? A human-centered personalization program that includes data, classification, content delivery, and general objectives can be compared to the Personalization Pyramid, a design-focused design. By using this strategy, you will be able to understand the core elements of a modern, UX-driven personalization system ( or at the very least know enough to get started ).

Getting Started

We’ll assume that you are already comfortable with the fundamentals of modern personalization for the purposes of this article. A nice guide can be found these: Website Personalization Planning. Although Graphic jobs in this field can take a variety of forms, they frequently start from the same place.

Common scenarios for starting a personalisation task:

• Your business or client made a purchase to support personalization with a content management system ( CMS ), marketing automation platform ( MAP ), or other related technology.
• The CMO, CDO, or CIO has identified customisation as a target
• User data is unclear or disjointed.
• You are running some secluded targeting strategies or A/B tests
• On personalization strategy, participants disagree.
• Mandate of customer privacy rules ( e. g. GDPR ) requires revisiting existing user targeting practices

Regardless of where you begin, a powerful personalization system will require the same key building stones. These are the “levels” on the tower, as we’ve made them. Whether you are a UX artist, scholar, or planner, understanding the core components may help make your contribution effective.

From top to bottom, the amounts include:

North Star: What larger corporate goal is driving the personalization system?
1. Objectives: What are the specific, tangible benefits of the system?
2. Touchpoints: Where will you get a customized experience?
3. Contexts and Campaigns: What personalization information does the person view?
4. What constitutes a distinct, accessible market according to consumer parts?
5. Actionable Data: What dependable and credible information is captured by our professional platform to generate personalization?
6. What wider set of data is conceivable ( now in our environment ) to allow you to optimize?

We’ll go through each of these amounts in change. To make this more bearable, we created a deck of cards that accompany it to show specific examples from each stage. We’ve found them helpful in customisation pondering periods, and will include cases for you here.

Starting at the Top

The elements of the pyramids are as follows:

North Star

With your personalisation plan, whether large or small, you aim for a general north star. The North Star defines the (one ) overall mission of the personalization program. What do you hope to accomplish? North Stars cast a ghost. The darkness is bigger the sun the bigger the sun. Example of North Starts may include:

Function: Personalized based on fundamental customer sources. Examples:” Raw” messages, basic search effects, system user settings and settings options, general flexibility, basic improvements
1. Feature: Self-contained personalisation component. Examples:” Cooked” notifications, advanced optimizations ( geolocation ), basic dynamic messaging, customized modules, automations, recommenders
2. Experience: Individualized customer experiences across a variety of interactions and customer flows. Examples: Email campaigns, landing pages, advanced messaging ( i. e. C2C chat ) or conversational interfaces, larger user flows and content-intensive optimizations ( localization ).
3. Solution: Highly distinctive, personalized solution experiences. Example: Standalone, branded encounters with personalization at their base, like the “algotorial” songs by Spotify quite as Discover Weekly.

Goals

Personalization can help speed up designing with user intentions, as in any great UX design. Goals are the military and tangible metrics that may prove the entire program is effective. A good place to begin is with your existing analytics and calculation software and metrics you can standard against. In some cases, new targets may be ideal. The most important thing to keep in mind is that personalisation is certainly a desired outcome. It is a means to an end. Common targets include:

• Conversion
• Time spent on work
• Net promoter score ( NPS)
• Satisfaction of the customers

Touchpoints

Touchpoints are where the personalisation happens. This will be one of your biggest areas of responsibility as a UX custom. The connections available to you will depend on how your personalization and associated technology features are instrumented, and should be rooted in improving a person’s experience at a certain point in the trip. Touchpoints can be multi-device ( mobile, in-store, website ), as well as more specific ( web banner, web pop-up, etc. ). Here are a few illustrations:

Channel-level Points

• Email: Role
• Email opens at what time?
• In-store display ( JSON endpoint )
• Native app
• Search

Wireframe-level Touchpoints

• Web overlay
• Web alert bar
• Web banner
• Web content block
• menu on the web

If you’re designing for web interfaces, for example, you will likely need to include personalized “zones” in your wireframes. Based on our next step, contexts, and campaigns, the content for these can be presented programmatically in touchpoints.

Contexts and Campaigns

Once you’ve identified some touchpoints, you can decide what kind of personalized content a user will receive. Many personalization tools will refer to these as” campaigns” ( so, for example, a campaign on a web banner for new visitors to the website ). These will be displayed programmatically to specific user segments, as defined by user data. At this stage, we find it helpful to consider two separate models: a context model and a content model. The context helps you consider the level of user engagement at the personalization moment, for instance, if they are just casually browsing information rather than engaging in a deep dive. Think of it in terms of information retrieval behaviors. The content model can then guide you in deciding what kind of personalization to use in the context ( for instance, an” Enrich” campaign that features related articles might be a good substitute for extant content ).

Personalization Context Model:

1. Browse
2. Skim
3. Nudge
4. Feast

Content model for personalization:

1. Alert
2. Make Easier
3. Cross-Sell
4. Enrich

We’ve written a lot more in depth about each of these models elsewhere, so be sure to check out Colin’s Personalization Content Model and Jeff’s Personalization Context Model.

User Groups

User segments can be created prescriptively or adaptively, based on user research ( e. g. via rules and logic tied to set user behaviors or via A/B testing ). You will need to think about how to treat the logged-in visitor, the guest or returning visitor for whom you may have a stateful cookie ( or another post-cookie identifier ), or the authenticated visitor who is logged in at the very least. Here are some examples from the personalization pyramid:

• Unknown
• Guest
• Authenticated
• Default
• Referred
• Role
• Cohort
• Unique ID

Actionable Data

Every organization with any digital presence has data. It’s important to inquire about how to use the data you can ethically collect on users, its inherent reliability and value, and how to use it ( sometimes referred to as “data activation” ). Fortunately, the tide is turning to first-party data: a recent study by Twilio estimates some 80 % of businesses are using at least some type of first-party data to personalize the customer experience.

First-party data has a number of benefits on the user experience front, including being relatively simple to collect, more likely to be accurate, and less susceptible to the” creep factor” of third-party data. So a key part of your UX strategy should be to determine what the best form of data collection is on your audiences. Here are a few illustrations:

There is a progression of profiling when it comes to recognizing and making decisioning about different audiences and their signals. As time and confidence and data volume increase, it varies to more granular constructs about smaller and smaller cohorts of users.

While some combination of implicit / explicit data is generally a prerequisite for any implementation ( more commonly referred to as first party and third-party data ) ML efforts are typically not cost-effective directly out of the box. This is because optimization requires a strong data backbone and content repository. But these approaches should be considered as part of the larger roadmap and may indeed help accelerate the organization’s overall progress. You’ll typically work together to create a profiling model with key stakeholders and product owners. The profiling model includes defining approach to configuring profiles, profile keys, profile cards and pattern cards. a scalable, multi-faceted approach to profiling.

Pulling it Together

The cards serve as a starting point for an inventory of sorts ( we offer blanks for you to customize your own ), a set of potential levers and motivations for the personalization activities you aspire to deliver, but they are more valuable when grouped together.

In assembling a card “hand”, one can begin to trace the entire trajectory from leadership focus down through a strategic and tactical execution. It is also at the heart of the way that both co-authors have organized workshops to build a backlog of programs, which would make a good subject for a separate article.

In the meantime, what is important to note is that each colored class of card is helpful to survey in understanding the range of choices potentially at your disposal, it is threading through and making concrete decisions about for whom this decisioning will be made: where, when, and how.

Lay Down Your Cards

Any effective personalization strategy must take into account near, middle, and long-term objectives. Even with the leading CMS platforms like Sitecore and Adobe or the most exciting composable CMS DXP out there, there is simply no “easy button” wherein a personalization program can be stood up and immediately view meaningful results. Having said that, all personalization activities follow the same grammatical convention, just like every sentence contains both nouns and verbs. These cards attempt to map that territory.

Humility, a writer’s most important quality, has a great circle to it. What about sincerity, an business manager’s necessary value? Or a doctor’s? Or a student’s? They all have fantastic sounds. When humility is our guiding light, the course is usually available for fulfillment, development, relation, and commitment. We’ll discuss why in this book.

That said, this is a guide for developers, and to that conclusion, I’d like to begin with a story—well, a voyage, actually. It’s a private one, and I’m going to make myself a little prone along the way. I call it:

The Absurd Pate of Justin: The Tale of Justin

When I was coming out of arts school, a long-haired, goateed novice, write was a known quantity to me, design on the web, however, was riddled with complexities to understand and learn, a problem to be solved. Although I had formal training in typography, layout, and creative design, what most intrigued me was how these traditional skills could be applied to a young online landscape. This theme may eventually form the rest of my profession.

So I devoured HTML and JavaScript novels into the wee hours of the morning and self-taught myself how to code during my freshman year rather than student and go into print like many of my companions. I wanted—nay, needed—to better understand the underlying relevance of what my design decisions may think when rendered in a website.

The so-called” Wild West” of website layout existed in the late 1990s and the early 2000s. Manufacturers at the time were all figuring out how to use layout and visual connection to the online environment. What regulations were in place? How may we break them and also engage, entertain, and present information? How was my values, which include modesty, respect, and connection, coincide with that on a more general level? I was eager to find out.

Those are amazing factors between non-career relationships and the world of design, even though I’m talking about a different time. What are your main passions, or ideals, that elevate medium? The main themes are the same, basically the same as what we previously discussed on the primary parallels between what fulfills you, independent of the physical or digital realms.

First within tables, animated GIFs, Flash, then with Web Standards, divs, and CSS, there was personality, raw unbridled creativity, and unique means of presentment that often defied any semblance of a visible grid. Splash screens and “browser requirement” pages aplenty. Usability and accessibility were typically victims of such a creation, but such paramount facets of any digital design were largely (and, in hindsight, unfairly) disregarded at the expense of experimentation.

For instance, this iteration of my personal portfolio site (” the pseudoroom” ) from that time was experimental if not a little overt in terms of visualizing how the idea of a living sketchbook was conveyed. Quite skeuomorphic. This one involved sketching and then passing a Photoshop file back and forth to experiment with various customer interactions with fellow artist and dear companion Marc Clancy, who is now a co-founder of the creative task organizing app Milanote. Finally, I’d break it down and protocol it into a modern layout.

Along with pattern book pieces, the site even offered free downloads for Mac OS customizations: pc wallpapers that were successfully style experimentation, custom-designed typefaces, and desktop icons.

GUI Galaxy was a design, pixel art, and Mac-centric news portal that graphic designer friends and I developed from around the same time.

Design news portals were incredibly popular at the time, and they now accept tweet-sized, small-format excerpts from relevant news from the categories I previously covered. If you took Twitter, curated it to a few categories, and wrapped it in a custom-branded experience, you’d have a design news portal from the late 90s / early 2000s.

We as designers had changed and developed a bandwidth-sensitive, award-winning, much more accessibility-conscious website. Still ripe with experimentation, yet more mindful of equitable engagement. Below are some content panes that show general news (tech, design ) and news centered on Mac. We also offered many of the custom downloads I cited before as present on my folio site but branded and themed to GUI Galaxy.

The presentation layer of the website’s backbone was made up of global design + illustration + news author collaboration. The backbone was a homegrown CMS. And the collaboration effort here, in addition to experimentation on a’ brand’ and content delivery, was hitting my core. We were creating a larger-than-anyone experience and establishing a global audience.

Collaboration and connection transcend medium in their impact, immensely fulfilling me as a designer.

Why am I going down this design memory lane with you, now? Two reasons.

First of all, there’s a reason for the nostalgia for that design era ( the” Wild West” era, as I put it ): the inherent exploration, personality, and creativity that dominated many design portals and personal portfolio websites. Ultra-finely detailed pixel art UI, custom illustration, bespoke vector graphics, all underpinned by a strong design community.

The web design industry has been in a state of stagnation right now. I suspect there’s a strong chance you’ve seen a site whose structure looks something like this: a hero image / banner with text overlaid, perhaps with a lovely rotating carousel of images ( laying the snark on heavy there ), a call to action, and three columns of sub-content directly beneath. Perhaps there are selections that vaguely relate to their respective content in an icon library.

Design, as it’s applied to the digital landscape, is in dire need of thoughtful layout, typography, and visual engagement that goes hand-in-hand with all the modern considerations we now know are paramount: usability. accessibility Load times and bandwidth- sensitive content delivery. A user-friendly presentation that connects with people wherever they are. We must be mindful of, and respectful toward, those concerns—but not at the expense of creativity of visual communication or via replicating cookie-cutter layouts.

Pixel Issues

Websites during this period were often designed and built on Macs whose OS and desktops looked something like this. Although Mac OS 7.5 is available, 8 and 9 are not very different.

How could any single icon, at any point, stand out and grab my attention, fascinated me? In this example, the user’s desktop is tidy, but think of a more realistic example with icon pandemonium. Or, let’s say an icon was a part of a larger system grouping ( fonts, extensions, control panels ): how did it maintain cohesion within a group as well?

These were 32 x 32 pixel creations, utilizing a 256-color palette, designed pixel-by-pixel as mini mosaics. This, in my opinion, was the embodiment of digital visual communication under such absurd constraints. And often, ridiculous restrictions can yield the purification of concept and theme.

So I started doing my homework and conducting my research. I was a student of this new medium, hungry to dissect, process, discover, and make it my own.

I wanted to see how I could push the boundaries of a 32×32 pixel grid with that 256-color palette, expanding upon the idea of exploration. Those ridiculous constraints forced a clarity of concept and presentation that I found incredibly appealing. I was thrown the digital gauntlet, and that challenge fueled my determination. And so, in my dorm room into the wee hours of the morning, I toiled away, bringing conceptual sketches into mini mosaic fruition.

These are some of my creations that I made using ResEdit, the only program I had at the time, to create icons. ResEdit was a clunky, built-in Mac OS utility not really made for exactly what we were using it for. Research is at the center of all of this work. Challenge. Problem-solving Again, these core connection-based values are agnostic of medium.

There’s one more design portal I want to talk about, which also serves as the second reason for my story to bring this all together.

Kaliber 1000 is short for K10k. K10k was founded in 1998 by Michael Schmidt and Toke Nygaard, and was the design news portal on the web during this period. It was the ideal setting for me, my friend, with its pixel art-filled presentation, meticulous attention to detail, and many of the site’s more well-known designers who were invited to be news authors. With respect where respect is due, GUI Galaxy’s concept was inspired by what these folks were doing.

For my part, the combination of my web design work and pixel art exploration began to get me some notoriety in the design scene. K10k eventually figured out that I was one of their very limited group of news writers who could contribute content to the website.

Amongst my personal work and side projects —and now with this inclusion—in the design community, this put me on the map. Additionally, my design work has started to appear on other design news portals, as well as be published in various printed collections, in domestic and international magazines, and in various printed collections. With that degree of success while in my early twenties, something else happened:

I actually changed into a colossal asshole in about a year of school, not less. The press and the praise became what fulfilled me, and they went straight to my head. My ego was inflated by them. I actually felt somewhat superior to my fellow designers.

The casualties? My design stagnated. My evolution has stagnated, as is my evolution.

I felt so supremely confident in my abilities that I effectively stopped researching and discovering. When I used to lead myself to iterate through concepts or sketches, I leaped right into Photoshop. I drew my inspiration from the smallest of sources ( and with blinders on ). Any criticism of my work from my fellow students was frequently vehemently dissented. The most tragic loss: I had lost touch with my values.

My ego almost destroyed some of my friendships and blossoming professional relationships. I was toxic in talking about design and in collaboration. But thankfully, candor was a gift from those same friends. They called me out on my unhealthy behavior.

Although it was something I initially rejected, I eventually had a chance to reflect on it in depth. I was soon able to accept, and process, and course correct. Although the realization made me feel uneasy, the re-awakening was necessary. I let go of the “reward” of adulation and re-centered upon what stoked the fire for me in art school. Most importantly, I returned to my fundamental values.

Always Students

Following that temporary regression, I was able to advance in both my personal and professional design. And I could self-reflect as I got older to facilitate further growth and course correction as needed.

Let’s take the Large Hadron Collider as an example. The LHC was designed” to help answer some of the fundamental open questions in physics, which concern the basic laws governing the interactions and forces among the elementary objects, the deep structure of space and time, and in particular the interrelation between quantum mechanics and general relativity”. Thank you, Wikipedia.

Around fifteen years ago, in one of my earlier professional roles, I designed the interface for the application that generated the LHC’s particle collision diagrams. These diagrams are the depiction of what is actually happening inside the Collider during any given particle collision event and are frequently regarded as works of art by themselves.

Designing the interface for this application was a fascinating process for me, in that I worked with Fermilab physicists to understand what the application was trying to achieve, but also how the physicists themselves would be using it. In order to accomplish this, in this role,

I cut my teeth on usability testing, working with the Fermilab team to iterate and improve the interface. To me, their language and the topics they discussed seemed foreign. And by making myself humble and working under the mindset that I was but a student, I made myself available to be a part of their world to generate that vital connection.

I also had my first ethnographic observational experience, where I observed how the physicists used the tool in their own environments, on their own terminals. For example, one takeaway was that due to the level of ambient light-driven contrast within the facility, the data columns ended up using white text on a dark gray background instead of black text-on-white. They could read through a lot of data at once and relieve their strain in the process. And Fermilab and CERN are government entities with rigorous accessibility standards, so my knowledge in that realm also grew. Another crucial form of communication was the barrier-free design.

So to those core drivers of my visual problem-solving soul and ultimate fulfillment: discovery, exposure to new media, observation, human connection, and evolution. I checked my ego before entering those values, which opened the door for those values.

An evergreen willingness to listen, learn, understand, grow, evolve, and connect yields our best work. I want to pay attention to the words “grow” and “evolve” in particular in that statement. If we are always students of our craft, we are also continually making ourselves available to evolve. Yes, we have years of practical design experience behind us. Or the focused lab sessions from a UX bootcamp. Or the monogrammed portfolio of our work. Or, ultimately, decades of a career behind us.

However, with all that being said, experience does not make one an “expert.”

As soon as we close our minds via an inner monologue of’ knowing it all’ or branding ourselves a” #thoughtleader” on social media, the designer we are is our final form. The artist we can be will never be there.

I have a creative side. Alchemy is what I do. It is a puzzle. I don’t perform it as much as I let it be done by me.

I have a creative side. This brand is never appropriate for all creatives. No everyone sees themselves in this way. Some innovative individuals incorporate technology into their work. I honor their assertion, which is true. Perhaps I have a little bit of fear for them. However, my being and approach are unique.

It distracts you to apologize and qualify in progress. My brain uses that to destroy me. I’ll leave it alone for today. I may come back later to make amends and count. After I’ve said what I should have. which is sufficient.

Except when it flows like a beverage valley and is simple.

Sometimes it does go that method. Maybe what I need to make arrives in a flash. When I say something at that moment, I’ve learned not to say it because people often don’t work hard enough to acknowledge that the idea is the best idea even when you know it’s the best idea.

Sometimes I just work until the thought strikes me. It occasionally arrives right away, but I don’t remind people for three weeks. Often I blurt out the plan so quickly that I didn’t stop myself. like a child who discovered a reward in a box of Cracker Jacks. I occasionally manage to get away with this. Yes, that is the best idea, but often others disagree. The majority of the time, they don’t, and I regret that passion has faded.

Passion should only be saved for the meet, when it matters. not the informal gathering that two different gatherings precede that appointment. Nobody understands why these conferences occur. We keep saying we’re going to get rid of them, but we just keep trying to find different ways to get them. They occasionally yet excel. Sometimes they detract from the real function, though. Depending on what you do and where you do it, the ratio between when conferences are valuable and when they are a sad distraction vary. And who you are and how you go about doing it. Suddenly, I digress. I have a creative side. That is the topic.

Often, a lot of hours of diligent and diligent work ends up with something that is rarely useful. Maybe I have to take that and move on to the next task.

Don’t inquire about the procedure. I have a creative side.

I have a creative side. My ambitions are not in my power. And I have no power over my best tips.

I can chisel aside, surround myself with information or photos, and occasionally that works. I can go for a move, which occasionally works. There is no connection between sizzling fuel and flowing pots, and I may be making dinner. I frequently have a plan for action when I wake up. The idea that may have saved me disappears almost as frequently as I become aware and a part of the world once more as a senseless wind of oblivion. For imagination, in my opinion, comes from that other planet. The one that we enter in ambitions and, possibly, before and after suicide. But writers should be asking this, and I am not one of them. I have a creative side. Theologians are encouraged to build massive armies in their artistic globe, which they insist is genuine. But that is yet another diversion. And a sad one. Whether or not I am innovative or not, this may be on a much larger issue. But this is still a departure from what I said when I came below.

Often, the outcome is evasion. And suffering. Do you know the actor who is tortured by the cliché? Even when the artist attempts to create a soft drink song, a callback in a worn-out sitcom, or a budget request, that noun is accurate.

Some individuals who detest being called artistic perhaps been closeted artists, but that’s between them and their gods. No offence here, that’s meant. Your facts is also true. However, mine is for me.

Artists are recognized as artists.

Disadvantages know cons, just like real rappers recognize actual rappers, just like queers recognize queers. People have a lot of regard for artists. We respect, follow, and almost deify the excellent ones. Of course, it is dreadful to revere any person. We’ve been given a warning. We are more knowledgeable. We are aware that people are simply people. They argue, they are depressed, they regret their most important choices, they are weak and thirsty, they can be cruel, and they can be as terrible as we can because they are clay, just like us. But. But. However, they produce something incredible. They give birth to something that may not exist before them and couldn’t occur without. They are thought’s founders. And I suppose I should add that they are the mother of technology because it’s just lying it. Bad mee backside! Okay, that’s all said and done. Continue.

Because we compare our personal small accomplishments to those of the great ones, designers denigrate them. Wonderful video! I‘m not Miyazaki, so I‘m not. That is brilliance right now. That is brilliance straight out of the mouth of God. This unsatisfied small factor I created? It essentially fell off the back of the pumpkin truck. And the carrots weren’t actually new.

Artists is aware that they are at best Salieri. Also Mozart’s original artists hold that opinion.

I have a creative side. In my hallucinations, my former artistic managers are the ones who judge me because I haven’t worked in advertising in 30 times. They are correct in doing so. When it really counts, my mind goes flat because I am too lazy and simplistic. There is no treatment for innovative mania.

I have a creative side. Every project I create has a goal that makes Indiana Jones appear older and snoring in a balcony head. The more I pursue creativity, the faster I can finish my work, and the longer I brood and circle and gaze blankly before I can finish that work.

I can move ten times more quickly than those who aren’t creative, those who have only had a short-cut of creativity, and those who have just had a short-cut of creativity for work. Only that I spend twice as long putting the work off as they do before I work ten times as quickly as they do. When I put my mind to it, I am so confident in my ability to do a wonderful career. I am completely dependent on the excitement rush of delay. The climb also terrifies me.

I don’t create art.

I have a creative side. hardly a musician. Though as a boy, I had a dream that I would one day become that. Some of us fear and criticize our talents because we are not Michelangelos and Warhols. That is narcissism, but at least we aren’t in elections.

I have a creative side. Despite my belief in reason and science, I make decisions based on my own senses and instincts. and accept both the successes and the calamities that come with them.

I have a creative side. Every term I’ve said these may irritate another artists who have different viewpoints. Ask two artists a topic and find three opinions. No matter how we perhaps think about it, our debate, our passion for it, and our responsibility to our own truth, at least in my opinion, are the best indications that we are artists.

I have a creative side. I lament my lack of taste in almost all of the areas of human understanding, which I know very little about. And I put my ego before everything else in the places that are most important to me, or perhaps more precisely, to my passions. Without my passions, I had probably have to spend time staring living in the eye, which almost none of us can do for very long. No seriously. Actually, no. Because a lot of living is intolerable if you really look at it.

I have a creative side. I think that when I’m gone, some of the good parts of me will stay in the head of at least one additional person, just like a family does.

Working frees me from worrying about my job.

I have a creative side. I worry that my little present will disappear unexpectedly.

I have a creative side. I’m too busy making the next thing to devote too much time to it, especially since practically everything I create did achieve the level of success I conceive of.

I have a creative side. I think that method is the greatest mystery. I think I have to consider it so strongly that I actually made the foolish decision to publish an essay I wrote without having to go through or edit. I swear I didn’t do this frequently. But I did it right away because I was even more frightened of forgetting what I was saying because I was afraid of you seeing through my sad movements toward the wonderful.

There. I believe I’ve said it.

I’d like you to consider this a “yes … and” piece to complement Joe’s post. I’m just trying to reject what he’s saying, but I’m just trying to give some context to initiatives and opportunities where AI can make a difference for people with disabilities. I want to take some time to talk about what’s possible in hope that we’ll get there one day. I’m no saying that there aren’t real challenges or pressing problems with AI that need to be addressed; there are.

Other words

Joe’s article spends a lot of time addressing computer-vision types ‘ ability to create alternative words. He raises a lot of valid points about the state of the world right now. And while computer-vision concepts continue to improve in the quality and complexity of information in their information, their benefits aren’t wonderful. He argues to be accurate that the state of image research is currently very poor, especially for some image types, in large part due to the absence of contextual contexts in which to look at images ( as a result of having separate “foundation” models for words analysis and image analysis ). Today’s models aren’t trained to distinguish between images that are contextually relevant ( which should probably have descriptions ) and those that are purely decorative ( which might not even need a description ) either. Nonetheless, I still think there’s possible in this area.

As Joe points out, alt text editing via human-in-the-loop should be a given. And if AI can intervene to provide a starting place for alt text, even if the swift might say What is this BS? That’s not correct at all … Let me try to offer a starting point— I think that’s a gain.

If we can specifically station a design to examine image usage in context, it might help us more quickly determine which images are likely to be elegant and which ones are likely to need a description. That will help clarify which situations require image descriptions, and it will increase authors ‘ effectiveness in making their sites more visible.

While complex images—like graphs and charts—are challenging to describe in any sort of succinct way ( even for humans ), the image example shared in the GPT4 announcement points to an interesting opportunity as well. Let’s say you came across a map that merely stated the chart’s name and the type of representation it was:” Pie chart comparing smartphone use to have phone usage in US households making under$ 30, 000 annually.” ( That would be a pretty bad alt text for a chart because it would frequently leave many unanswered questions about the data, but let’s just assume that that was the description in place. ) If your browser knew that that image was a pie chart ( because an onboard model concluded this ), imagine a world where users could ask questions like these about the graphic:

• Do more people use smartphones or other types of smartphones?
• How many more?
• Is there a group of people that don’t fall into either of these buckets?
• What number is that?

For a moment, the chance to learn more about images and data in this way could be revolutionary for people with low vision and blindness as well as for those with various forms of color blindness, cognitive disabilities, and other issues. It could also be useful in educational contexts to help people who can see these charts, as is, to understand the data in the charts.

What if you could ask your browser to make a complicated chart simpler? What if you asked it to separate a single line from a line graph? What if you could ask your browser to transpose the colors of the different lines to work better for form of color blindness you have? What if you asked it to switch colors in favor of patterns? That seems like a possibility given the chat-based interfaces and our current ability to manipulate images in modern AI tools.

Now imagine a purpose-built model that could extract the information from that chart and convert it to another format. Perhaps it could convert that pie chart (or, better yet, a series of pie charts ) into more usable ( and useful ) formats, like spreadsheets, for instance. That would be incredible!

Matching algorithms

When Safiya Umoja Noble chose to write her book Algorithms of Oppression, she hit the nail on the head. Although her book focused on the ways that search engines can foster racism, I believe it to be equally accurate to say that all computer models have the potential to amplify conflict, bias, and intolerance. Whether it’s Twitter always showing you the latest tweet from a bored billionaire, YouTube sending us into a Q-hole, or Instagram warping our ideas of what natural bodies look like, we know that poorly authored and maintained algorithms are incredibly harmful. A large portion of this is attributable to the lack of diversity in those who create and shape them. However, when these platforms are built with inclusive features in mind, there is real potential for algorithm development to help people with disabilities.

Take Mentra, for example. They serve as a network of people with disabilities. Based on more than 75 data points, they match job seekers with potential employers using an algorithm. On the job-seeker side of things, it considers each candidate’s strengths, their necessary and preferred workplace accommodations, environmental sensitivities, and so on. It takes into account the workplace, the communication environment, and other factors. Mentra made the decision to change the script when it came to typical employment websites because it was run by neurodivergent people. They use their algorithm to propose available candidates to companies, who can then connect with job seekers that they are interested in, reducing the emotional and physical labor on the job-seeker side of things.

When more people with disabilities are involved in the development of algorithms, this can lower the likelihood that these algorithms will harm their communities. That’s why diverse teams are so crucial.

Imagine that a social media company’s recommendation engine was tuned to analyze who you’re following and if it was tuned to prioritize follow recommendations for people who talked about similar things but who were different in some key ways from your existing sphere of influence. For instance, if you follow a group of white men who are not white or aren’t white and who also discuss AI, it might be wise to follow those who are also disabled or who are not white. If you followed its advice, you might be able to understand what is happening in the AI field more fully and nuancedly. These same systems should also use their understanding of biases about particular communities—including, for instance, the disability community—to make sure that they aren’t recommending any of their users follow accounts that perpetuate biases against (or, worse, spewing hate toward ) those groups.

Other ways that AI can assist people with disabilities

If I weren’t attempting to combine this with other tasks, I’m sure I could go on and on, giving various examples of how AI could be used to assist people with disabilities, but I’m going to make this last section into a bit of a lightning round. In no particular order:

Voice preservation You may be aware of the voice-prescribing options from Microsoft, Acapela, or others, or you may have seen the announcement for VALL-E or Apple’s Global Accessibility Awareness Day. It’s possible to train an AI model to replicate your voice, which can be a tremendous boon for people who have ALS ( Lou Gehrig’s disease ) or motor-neuron disease or other medical conditions that can lead to an inability to talk. We need to approach this tech responsibly because it has the potential to have a truly transformative impact, which is why it can also be used to create audio deepfakes.
• Voice recognition. Researchers like those in the Speech Accessibility Project are paying people with disabilities for their help in collecting recordings of people with atypical speech. As I type, they are actively seeking out people who have Parkinson’s and related conditions, and they intend to expand this list as the project develops. More people with disabilities will be able to use voice assistants, dictation software, and voice-response services as a result of this research, which will result in more inclusive data sets that will enable them to use their computers and other devices more easily and with just their voices.
• Text transformation. LLMs of the current generation are quite capable of changing text without creating hallucinations. This is incredibly empowering for those who have cognitive disabilities and who may benefit from text summaries, simplified versions, or even text that has been prepared for Bionic Reading.

The importance of diverse teams and data

We must acknowledge that our differences matter. The intersections of the identities we live in have an impact on our lived experiences. These lived experiences—with all their complexities ( and joys and pain ) —are valuable inputs to the software, services, and societies that we shape. Our differences must be reflected in the data we use to develop new models, and those who provide it need to be compensated for doing so. Stronger models can be created using inclusive data sets, which lead to more equitable outcomes.

Want a model that doesn’t demean or patronize or objectify people with disabilities? Make sure that you include information about disabilities that has been written by people with a variety of disabilities in the training data.

Want a non-binary language model? You may be able to use existing data sets to build a filter that can intercept and remediate ableist language before it reaches readers. Despite this, AI models won’t soon replace human copy editors when it comes to sensitivity reading.

Want a copilot for coding that provides recommendations that are accessible after the jump? Train it on code that you know to be accessible.

I have no doubts about how dangerous AI can and will be for people today, tomorrow, and for the rest of the world. However, I also think that we can acknowledge this and make thoughtful, thoughtful, and intentional changes in our approaches to AI that will reduce harm over time as well. Today, tomorrow, and well into the future.

Many thanks to Kartik Sawhney for supporting the development of this article, Ashley Bischoff for providing me with invaluable editorial support, and of course, Joe Dolson for the prompt.

The same holds true for those of us who are currently employed in design and development. Having worked on the web for about three years at this point, I’ve seen the typical wax and wane of concepts, strategies, and systems. Every day we as developers and designers re-enter a routine music, a brand-new concept or technology emerges to shake things up and completely alter our world.

How we got below

I built my first website in the mid-’90s. Design and development on the web back then was a free-for-all, with few established norms. For any layout aside from a single column, we used table elements, often with empty cells containing a single pixel spacer GIF to add empty space. We styled text with numerous font tags, nesting the tags every time we wanted to vary the font style. And we had only three or four typefaces to choose from: Arial, Courier, or Times New Roman. When Verdana and Georgia came out in 1996, we rejoiced because our options had nearly doubled. The only safe colors to choose from were the 216 “web safe” colors known to work across platforms. The few interactive elements (like contact forms, guest books, and counters) were mostly powered by CGI scripts (predominantly written in Perl at the time). Achieving any kind of unique look involved a pile of hacks all the way down. Interaction was often limited to specific pages in a site.

online requirements were born.

At the turn of the century, a new cycle started. Crufty code littered with table layouts and font tags waned, and a push for web standards waxed. Newer technologies like CSS got more widespread adoption by browsers makers, developers, and designers. This shift toward standards didn’t happen accidentally or overnight. It took active engagement between the W3C and browser vendors and heavy evangelism from folks like the Web Standards Project to build standards. A List Apart and books like Designing with Web Standards by Jeffrey Zeldman played key roles in teaching developers and designers why standards are important, how to implement them, and how to sell them to their organizations. And approaches like progressive enhancement introduced the idea that content should be available for all browsers—with additional enhancements available for more advanced browsers. Meanwhile, sites like the CSS Zen Garden showcased just how powerful and versatile CSS can be when combined with a solid semantic HTML structure.

Server-side language like PHP, Java, and.NET took Perl as the primary back-end computers, and the cgi-bin was tossed in the garbage bin. With these improved server-side equipment, the first period of internet programs started with content-management methods (especially those used in blogs like Blogger, Grey Matter, Movable Type, and WordPress ) In the mid-2000s, AJAX opened gates for sequential interaction between the front end and back close. Pages had now revise their content without having to reload. A crop of Script frameworks like Prototype, YUI, and ruby arose to aid developers develop more credible client-side interaction across browsers that had wildly varying levels of standards support. Techniques like image replacement enable skilled designers and developers to use fonts of their choosing. And technologies like Flash made it possible to add animations, games, and even more interactivity.

These new methods, standards, and technologies greatly reenergized the sector. Web design flourished as designers and developers explored more diverse styles and layouts. However, we still relied heavily on numerous hacks. Early CSS was a huge improvement over table-based layouts when it came to basic layout and text styling, but its limitations at the time meant that designers and developers still relied heavily on images for complex shapes ( such as rounded or angled corners ) and tiled backgrounds for the appearance of full-length columns (among other hacks ). All kinds of nested floats or absolute positioning ( or both ) were necessary for complicated layouts. Flash and image replacement for custom fonts was a great start toward varying the typefaces from the big five, but both hacks introduced accessibility and performance problems. And JavaScript libraries made it simple for anyone to add a dash of interaction to pages, even at the expense of double, even quadrupling, the download size of basic websites.

The web as software platform

The balance between the front end and the back end continued to improve, leading to the development of the current web application era. Between expanded server-side programming languages ( which kept growing to include Ruby, Python, Go, and others ) and newer front-end tools like React, Vue, and Angular, we could build fully capable software on the web. Along with these tools, there were additional options, such as shared package libraries, build automation, and collaborative version control. What was once primarily an environment for linked documents became a realm of infinite possibilities.

Mobile devices increased in their capabilities as well, and they gave us access to the internet while we were traveling. Mobile apps and responsive design opened up opportunities for new interactions anywhere and any time.

This fusion of potent mobile devices and potent development tools contributed to the growth of social media and other centralized tools for user interaction and consumption. As it became easier and more common to connect with others directly on Twitter, Facebook, and even Slack, the desire for hosted personal sites waned. Social media provided connections on a global scale, with both the positive and negative effects.

Want a much more extensive history of how we got here, with some other takes on ways that we can improve? ” Of Time and the Web” was written by Jeremy Keith. Or check out the” Web Design History Timeline” at the Web Design Museum. Additionally, Neal Agarwal takes a fascinating tour of” Internet Artifacts.”

Where we are now

It seems like we’ve reached yet another significant turning point in the last couple of years. As social-media platforms fracture and wane, there’s been a growing interest in owning our own content again. From the tried-and-true classic of hosting plain HTML files to static site generators and content management systems of all kinds, there are many different ways to create websites. The fracturing of social media also comes with a cost: we lose crucial infrastructure for discovery and connection. Webmentions, RSS, ActivityPub, and other IndieWeb tools can be useful in this regard, but they’re still largely underdeveloped and difficult to use for the less geeky. We can build amazing personal websites and add to them regularly, but without discovery and connection, it can sometimes feel like we may as well be shouting into the void.

Browser support for CSS, JavaScript, and other web components has increased, particularly with initiatives like Interop. New technologies gain support across the board in a fraction of the time that they used to. I frequently find out about a new feature and check its browser support only to discover that its coverage has already exceeded 80 %. Nowadays, the barrier to using newer techniques often isn’t browser support but simply the limits of how quickly designers and developers can learn what’s available and how to adopt it.

We can now prototype almost any idea with just a few commands and a few lines of code. All the tools that we now have available make it easier than ever to start something new. However, as we upgrade and maintain these frameworks, we eventually pay the upfront costs that these frameworks may initially save in terms of our technical debt.

If we rely on third-party frameworks, adopting new standards can sometimes take longer since we may have to wait for those frameworks to adopt those standards. These frameworks, which previously made it easier to adopt new techniques sooner, have since evolved into obstacles. These same frameworks often come with performance costs too, forcing users to wait for scripts to load before they can read or interact with pages. And frequently, when scripts fail ( whether due to poor code, network problems, or other environmental factors ), users are left with blank or broken pages.

Where do we go from here?

Hacks of today help to shape standards for tomorrow. And there’s nothing inherently wrong with embracing hacks —for now—to move the present forward. Problems only arise when we refuse to acknowledge that they are hacks or when we choose not to replace them. So what can we do to create the future we want for the web?

Build for the long haul. Optimize for performance, for accessibility, and for the user. weigh the price of those user-friendly tools. They may make your job a little easier today, but how do they affect everything else? What is the cost to the users? To future developers? To adoption of standards? Sometimes the convenience may be worth it. Sometimes it’s just a hack that you’ve gotten used to. And sometimes it’s holding you back from even better options.

Start with the basics. Standards continue to evolve over time, but browsers have done a remarkably good job of continuing to support older standards. The same holds true for third-party frameworks, though. Sites built with even the hackiest of HTML from the’ 90s still work just fine today. The same can’t be said about websites created with frameworks even after a few years.

Design with care. Consider the effects of each choice, whether your craft is code, pixels, or processes. The convenience of many a modern tool comes at the cost of not always understanding the underlying decisions that have led to its design and not always considering the impact that those decisions can have. Use the time saved by modern tools to think more carefully and make decisions with care rather than rushing to “move fast and break things”

Always be learning. If you’re constantly learning, you’re also developing. Sometimes it may be hard to pinpoint what’s worth learning and what’s just today’s hack. Even if you were to concentrate solely on learning standards, you might end up focusing on something that won’t matter next year. ( Remember XHTML? ) However, ongoing learning opens up new neural connections, and the techniques you learn in one day may be useful for guiding future experiments.

Play, experiment, and be weird! This website we created is the most incredible experiment. It’s the single largest human endeavor in history, and yet each of us can create our own pocket within it. Be brave and make new friends. Build a playground for ideas. Create absurd experiments in your own crazy science lab. Start your own small business. There is no better place for being more creative, risk-taking, and expressing our creativity.

Share and amplify. Share what you think has worked for you as you experiment, play, and learn. Write on your own website, post on whichever social media site you prefer, or shout it from a TikTok. Write something for A List Apart! But take the time to amplify others too: find new voices, learn from them, and share what they’ve taught you.

Make a move and make it happen.

As designers and developers for the web ( and beyond ), we’re responsible for building the future every day, whether that may take the shape of personal websites, social media tools used by billions, or anything in between. Let’s incorporate our values into the products we produce, and let’s improve the world for everyone. Create that thing that only you are uniquely qualified to make. Then share it, improve it, re-use it, or create something new. Learn. Make. Share. grow. Rinse and repeat. Everything will change whenever you believe you’ve mastered the web.

Picture this. You’ve joined a squad at your company that’s designing new product features with an emphasis on automation or AI. Or your company has just implemented a personalization engine. Either way, you’re designing with data. Now what? When it comes to designing for personalization, there are many cautionary tales, no overnight successes, and few guides for the perplexed. 

Between the fantasy of getting it right and the fear of it going wrong—like when we encounter “persofails” in the vein of a company repeatedly imploring everyday consumers to buy additional toilet seats—the personalization gap is real. It’s an especially confounding place to be a digital professional without a map, a compass, or a plan.

For those of you venturing into personalization, there’s no Lonely Planet and few tour guides because effective personalization is so specific to each organization’s talent, technology, and market position. 

But you can ensure that your team has packed its bags sensibly.

There’s a DIY formula to increase your chances for success. At minimum, you’ll defuse your boss’s irrational exuberance. Before the party you’ll need to effectively prepare.

We call it prepersonalization.

Behind the music

Consider Spotify’s DJ feature, which debuted this past year.

We’re used to seeing the polished final result of a personalization feature. Before the year-end award, the making-of backstory, or the behind-the-scenes victory lap, a personalized feature had to be conceived, budgeted, and prioritized. Before any personalization feature goes live in your product or service, it lives amid a backlog of worthy ideas for expressing customer experiences more dynamically.

So how do you know where to place your personalization bets? How do you design consistent interactions that won’t trip up users or—worse—breed mistrust? We’ve found that for many budgeted programs to justify their ongoing investments, they first needed one or more workshops to convene key stakeholders and internal customers of the technology. Make yours count.

​From Big Tech to fledgling startups, we’ve seen the same evolution up close with our clients. In our experiences with working on small and large personalization efforts, a program’s ultimate track record—and its ability to weather tough questions, work steadily toward shared answers, and organize its design and technology efforts—turns on how effectively these prepersonalization activities play out.

Time and again, we’ve seen effective workshops separate future success stories from unsuccessful efforts, saving countless time, resources, and collective well-being in the process.

A personalization practice involves a multiyear effort of testing and feature development. It’s not a switch-flip moment in your tech stack. It’s best managed as a backlog that often evolves through three steps: 

1. customer experience optimization (CXO, also known as A/B testing or experimentation)
2. always-on automations (whether rules-based or machine-generated)
3. mature features or standalone product development (such as Spotify’s DJ experience)

This is why we created our progressive personalization framework and why we’re field-testing an accompanying deck of cards: we believe that there’s a base grammar, a set of “nouns and verbs” that your organization can use to design experiences that are customized, personalized, or automated. You won’t need these cards. But we strongly recommend that you create something similar, whether that might be digital or physical.

Set your kitchen timer

How long does it take to cook up a prepersonalization workshop? The surrounding assessment activities that we recommend including can (and often do) span weeks. For the core workshop, we recommend aiming for two to three days. Here’s a summary of our broader approach along with details on the essential first-day activities.

The full arc of the wider workshop is threefold:

1. Kickstart: This sets the terms of engagement as you focus on the opportunity as well as the readiness and drive of your team and your leadership. .
2. Plan your work: This is the heart of the card-based workshop activities where you specify a plan of attack and the scope of work.
3. Work your plan: This phase is all about creating a competitive environment for team participants to individually pitch their own pilots that each contain a proof-of-concept project, its business case, and its operating model.

Give yourself at least a day, split into two large time blocks, to power through a concentrated version of those first two phases.

Kickstart: Whet your appetite

We call the first lesson the “landscape of connected experience.” It explores the personalization possibilities in your organization. A connected experience, in our parlance, is any UX requiring the orchestration of multiple systems of record on the backend. This could be a content-management system combined with a marketing-automation platform. It could be a digital-asset manager combined with a customer-data platform.

Spark conversation by naming consumer examples and business-to-business examples of connected experience interactions that you admire, find familiar, or even dislike. This should cover a representative range of personalization patterns, including automated app-based interactions (such as onboarding sequences or wizards), notifications, and recommenders. We have a catalog of these in the cards. Here’s a list of 142 different interactions to jog your thinking.

This is all about setting the table. What are the possible paths for the practice in your organization? If you want a broader view, here’s a long-form primer and a strategic framework.

Assess each example that you discuss for its complexity and the level of effort that you estimate that it would take for your team to deliver that feature (or something similar). In our cards, we divide connected experiences into five levels: functions, features, experiences, complete products, and portfolios. Size your own build here. This will help to focus the conversation on the merits of ongoing investment as well as the gap between what you deliver today and what you want to deliver in the future.

Next, have your team plot each idea on the following 2×2 grid, which lays out the four enduring arguments for a personalized experience. This is critical because it emphasizes how personalization can not only help your external customers but also affect your own ways of working. It’s also a reminder (which is why we used the word argument earlier) of the broader effort beyond these tactical interventions.

Each team member should vote on where they see your product or service putting its emphasis. Naturally, you can’t prioritize all of them. The intention here is to flesh out how different departments may view their own upsides to the effort, which can vary from one to the next. Documenting your desired outcomes lets you know how the team internally aligns across representatives from different departments or functional areas.

The third and final kickstart activity is about naming your personalization gap. Is your customer journey well documented? Will data and privacy compliance be too big of a challenge? Do you have content metadata needs that you have to address? (We’re pretty sure that you do: it’s just a matter of recognizing the relative size of that need and its remedy.) In our cards, we’ve noted a number of program risks, including common team dispositions. Our Detractor card, for example, lists six stakeholder behaviors that hinder progress.

Effectively collaborating and managing expectations is critical to your success. Consider the potential barriers to your future progress. Press the participants to name specific steps to overcome or mitigate those barriers in your organization. As studies have shown, personalization efforts face many common barriers.

At this point, you’ve hopefully discussed sample interactions, emphasized a key area of benefit, and flagged key gaps? Good—you’re ready to continue.

Hit that test kitchen

Next, let’s look at what you’ll need to bring your personalization recipes to life. Personalization engines, which are robust software suites for automating and expressing dynamic content, can intimidate new customers. Their capabilities are sweeping and powerful, and they present broad options for how your organization can conduct its activities. This presents the question: Where do you begin when you’re configuring a connected experience?

What’s important here is to avoid treating the installed software like it were a dream kitchen from some fantasy remodeling project (as one of our client executives memorably put it). These software engines are more like test kitchens where your team can begin devising, tasting, and refining the snacks and meals that will become a part of your personalization program’s regularly evolving menu.

The ultimate menu of the prioritized backlog will come together over the course of the workshop. And creating “dishes” is the way that you’ll have individual team stakeholders construct personalized interactions that serve their needs or the needs of others.

The dishes will come from recipes, and those recipes have set ingredients.

Verify your ingredients

Like a good product manager, you’ll make sure—andyou’ll validate with the right stakeholders present—that you have all the ingredients on hand to cook up your desired interaction (or that you can work out what needs to be added to your pantry). These ingredients include the audience that you’re targeting, content and design elements, the context for the interaction, and your measure for how it’ll come together. 

This isn’t just about discovering requirements. Documenting your personalizations as a series of if-then statements lets the team: 

1. compare findings toward a unified approach for developing features, not unlike when artists paint with the same palette; 
2. specify a consistent set of interactions that users find uniform or familiar; 
3. and develop parity across performance measurements and key performance indicators too. 

This helps you streamline your designs and your technical efforts while you deliver a shared palette of core motifs of your personalized or automated experience.

Compose your recipe

What ingredients are important to you? Think of a who-what-when-why construct: 

• Who are your key audience segments or groups?
• What kind of content will you give them, in what design elements, and under what circumstances?
• And for which business and user benefits?

We first developed these cards and card categories five years ago. We regularly play-test their fit with conference audiences and clients. And we still encounter new possibilities. But they all follow an underlying who-what-when-why logic.

Here are three examples for a subscription-based reading app, which you can generally follow along with right to left in the cards in the accompanying photo below. 

1. Nurture personalization: When a guest or an unknown visitor interacts with  a product title, a banner or alert bar appears that makes it easier for them to encounter a related title they may want to read, saving them time.
2. Welcome automation: When there’s a newly registered user, an email is generated to call out the breadth of the content catalog and to make them a happier subscriber.
3. Winback automation: Before their subscription lapses or after a recent failed renewal, a user is sent an email that gives them a promotional offer to suggest that they reconsider renewing or to remind them to renew.

A useful preworkshop activity may be to think through a first draft of what these cards might be for your organization, although we’ve also found that this process sometimes flows best through cocreating the recipes themselves. Start with a set of blank cards, and begin labeling and grouping them through the design process, eventually distilling them to a refined subset of highly useful candidate cards.

You can think of the later stages of the workshop as moving from recipes toward a cookbook in focus—like a more nuanced customer-journey mapping. Individual “cooks” will pitch their recipes to the team, using a common jobs-to-be-done format so that measurability and results are baked in, and from there, the resulting collection will be prioritized for finished design and delivery to production.

Better kitchens require better architecture

Simplifying a customer experience is a complicated effort for those who are inside delivering it. Beware anyone who says otherwise. With that being said,  “Complicated problems can be hard to solve, but they are addressable with rules and recipes.”

When personalization becomes a laugh line, it’s because a team is overfitting: they aren’t designing with their best data. Like a sparse pantry, every organization has metadata debt to go along with its technical debt, and this creates a drag on personalization effectiveness. Your AI’s output quality, for example, is indeed limited by your IA. Spotify’s poster-child prowess today was unfathomable before they acquired a seemingly modest metadata startup that now powers its underlying information architecture.

You can definitely stand the heat…

Personalization technology opens a doorway into a confounding ocean of possible designs. Only a disciplined and highly collaborative approach will bring about the necessary focus and intention to succeed. So banish the dream kitchen. Instead, hit the test kitchen to save time, preserve job satisfaction and security, and safely dispense with the fanciful ideas that originate upstairs of the doers in your organization. There are meals to serve and mouths to feed.

This workshop framework gives you a fighting shot at lasting success as well as sound beginnings. Wiring up your information layer isn’t an overnight affair. But if you use the same cookbook and shared recipes, you’ll have solid footing for success. We designed these activities to make your organization’s needs concrete and clear, long before the hazards pile up.

While there are associated costs toward investing in this kind of technology and product design, your ability to size up and confront your unique situation and your digital capabilities is time well spent. Don’t squander it. The proof, as they say, is in the pudding.

Ever since I was a boy, I’ve been fascinated with movies. I loved the characters and the excitement—but most of all the stories. I wanted to be an actor. And I believed that I’d get to do the things that Indiana Jones did and go on exciting adventures. I even dreamed up ideas for movies that my friends and I could make and star in. But they never went any further. I did, however, end up working in user experience (UX). Now, I realize that there’s an element of theater to UX—I hadn’t really considered it before, but user research is storytelling. And to get the most out of user research, you need to tell a good story where you bring stakeholders—the product team and decision makers—along and get them interested in learning more.

Think of your favorite movie. More than likely it follows a three-act structure that’s commonly seen in storytelling: the setup, the conflict, and the resolution. The first act shows what exists today, and it helps you get to know the characters and the challenges and problems that they face. Act two introduces the conflict, where the action is. Here, problems grow or get worse. And the third and final act is the resolution. This is where the issues are resolved and the characters learn and change. I believe that this structure is also a great way to think about user research, and I think that it can be especially helpful in explaining user research to others.

Use storytelling as a structure to do research

It’s sad to say, but many have come to see research as being expendable. If budgets or timelines are tight, research tends to be one of the first things to go. Instead of investing in research, some product managers rely on designers or—worse—their own opinion to make the “right” choices for users based on their experience or accepted best practices. That may get teams some of the way, but that approach can so easily miss out on solving users’ real problems. To remain user-centered, this is something we should avoid. User research elevates design. It keeps it on track, pointing to problems and opportunities. Being aware of the issues with your product and reacting to them can help you stay ahead of your competitors.

In the three-act structure, each act corresponds to a part of the process, and each part is critical to telling the whole story. Let’s look at the different acts and how they align with user research.

Act one: setup

The setup is all about understanding the background, and that’s where foundational research comes in. Foundational research (also called generative, discovery, or initial research) helps you understand users and identify their problems. You’re learning about what exists today, the challenges users have, and how the challenges affect them—just like in the movies. To do foundational research, you can conduct contextual inquiries or diary studies (or both!), which can help you start to identify problems as well as opportunities. It doesn’t need to be a huge investment in time or money.

Erika Hall writes about minimum viable ethnography, which can be as simple as spending 15 minutes with a user and asking them one thing: “‘Walk me through your day yesterday.’ That’s it. Present that one request. Shut up and listen to them for 15 minutes. Do your damndest to keep yourself and your interests out of it. Bam, you’re doing ethnography.” According to Hall, “[This] will probably prove quite illuminating. In the highly unlikely case that you didn’t learn anything new or useful, carry on with enhanced confidence in your direction.”  

This makes total sense to me. And I love that this makes user research so accessible. You don’t need to prepare a lot of documentation; you can just recruit participants and do it! This can yield a wealth of information about your users, and it’ll help you better understand them and what’s going on in their lives. That’s really what act one is all about: understanding where users are coming from. 

Jared Spool talks about the importance of foundational research and how it should form the bulk of your research. If you can draw from any additional user data that you can get your hands on, such as surveys or analytics, that can supplement what you’ve heard in the foundational studies or even point to areas that need further investigation. Together, all this data paints a clearer picture of the state of things and all its shortcomings. And that’s the beginning of a compelling story. It’s the point in the plot where you realize that the main characters—or the users in this case—are facing challenges that they need to overcome. Like in the movies, this is where you start to build empathy for the characters and root for them to succeed. And hopefully stakeholders are now doing the same. Their sympathy may be with their business, which could be losing money because users can’t complete certain tasks. Or maybe they do empathize with users’ struggles. Either way, act one is your initial hook to get the stakeholders interested and invested.

Once stakeholders begin to understand the value of foundational research, that can open doors to more opportunities that involve users in the decision-making process. And that can guide product teams toward being more user-centered. This benefits everyone—users, the product, and stakeholders. It’s like winning an Oscar in movie terms—it often leads to your product being well received and successful. And this can be an incentive for stakeholders to repeat this process with other products. Storytelling is the key to this process, and knowing how to tell a good story is the only way to get stakeholders to really care about doing more research. 

This brings us to act two, where you iteratively evaluate a design or concept to see whether it addresses the issues.

Act two: conflict

Act two is all about digging deeper into the problems that you identified in act one. This usually involves directional research, such as usability tests, where you assess a potential solution (such as a design) to see whether it addresses the issues that you found. The issues could include unmet needs or problems with a flow or process that’s tripping users up. Like act two in a movie, more issues will crop up along the way. It’s here that you learn more about the characters as they grow and develop through this act. 

Usability tests should typically include around five participants according to Jakob Nielsen, who found that that number of users can usually identify most of the problems: “As you add more and more users, you learn less and less because you will keep seeing the same things again and again… After the fifth user, you are wasting your time by observing the same findings repeatedly but not learning much new.” 

There are parallels with storytelling here too; if you try to tell a story with too many characters, the plot may get lost. Having fewer participants means that each user’s struggles will be more memorable and easier to relay to other stakeholders when talking about the research. This can help convey the issues that need to be addressed while also highlighting the value of doing the research in the first place.

Researchers have run usability tests in person for decades, but you can also conduct usability tests remotely using tools like Microsoft Teams, Zoom, or other teleconferencing software. This approach has become increasingly popular since the beginning of the pandemic, and it works well. You can think of in-person usability tests like going to a play and remote sessions as more like watching a movie. There are advantages and disadvantages to each. In-person usability research is a much richer experience. Stakeholders can experience the sessions with other stakeholders. You also get real-time reactions—including surprise, agreement, disagreement, and discussions about what they’re seeing. Much like going to a play, where audiences get to take in the stage, the costumes, the lighting, and the actors’ interactions, in-person research lets you see users up close, including their body language, how they interact with the moderator, and how the scene is set up.

If in-person usability testing is like watching a play—staged and controlled—then conducting usability testing in the field is like immersive theater where any two sessions might be very different from one another. You can take usability testing into the field by creating a replica of the space where users interact with the product and then conduct your research there. Or you can go out to meet users at their location to do your research. With either option, you get to see how things work in context, things come up that wouldn’t have in a lab environment—and conversion can shift in entirely different directions. As researchers, you have less control over how these sessions go, but this can sometimes help you understand users even better. Meeting users where they are can provide clues to the external forces that could be affecting how they use your product. In-person usability tests provide another level of detail that’s often missing from remote usability tests. 

That’s not to say that the “movies”—remote sessions—aren’t a good option. Remote sessions can reach a wider audience. They allow a lot more stakeholders to be involved in the research and to see what’s going on. And they open the doors to a much wider geographical pool of users. But with any remote session there is the potential of time wasted if participants can’t log in or get their microphone working. 

The benefit of usability testing, whether remote or in person, is that you get to see real users interact with the designs in real time, and you can ask them questions to understand their thought processes and grasp of the solution. This can help you not only identify problems but also glean why they’re problems in the first place. Furthermore, you can test hypotheses and gauge whether your thinking is correct. By the end of the sessions, you’ll have a much clearer picture of how usable the designs are and whether they work for their intended purposes. Act two is the heart of the story—where the excitement is—but there can be surprises too. This is equally true of usability tests. Often, participants will say unexpected things, which change the way that you look at things—and these twists in the story can move things in new directions. 

Unfortunately, user research is sometimes seen as expendable. And too often usability testing is the only research process that some stakeholders think that they ever need. In fact, if the designs that you’re evaluating in the usability test aren’t grounded in a solid understanding of your users (foundational research), there’s not much to be gained by doing usability testing in the first place. That’s because you’re narrowing the focus of what you’re getting feedback on, without understanding the users’ needs. As a result, there’s no way of knowing whether the designs might solve a problem that users have. It’s only feedback on a particular design in the context of a usability test.  

On the other hand, if you only do foundational research, while you might have set out to solve the right problem, you won’t know whether the thing that you’re building will actually solve that. This illustrates the importance of doing both foundational and directional research. 

In act two, stakeholders will—hopefully—get to watch the story unfold in the user sessions, which creates the conflict and tension in the current design by surfacing their highs and lows. And in turn, this can help motivate stakeholders to address the issues that come up.

Act three: resolution

While the first two acts are about understanding the background and the tensions that can propel stakeholders into action, the third part is about resolving the problems from the first two acts. While it’s important to have an audience for the first two acts, it’s crucial that they stick around for the final act. That means the whole product team, including developers, UX practitioners, business analysts, delivery managers, product managers, and any other stakeholders that have a say in the next steps. It allows the whole team to hear users’ feedback together, ask questions, and discuss what’s possible within the project’s constraints. And it lets the UX research and design teams clarify, suggest alternatives, or give more context behind their decisions. So you can get everyone on the same page and get agreement on the way forward.

This act is mostly told in voiceover with some audience participation. The researcher is the narrator, who paints a picture of the issues and what the future of the product could look like given the things that the team has learned. They give the stakeholders their recommendations and their guidance on creating this vision.

Nancy Duarte in the Harvard Business Review offers an approach to structuring presentations that follow a persuasive story. “The most effective presenters use the same techniques as great storytellers: By reminding people of the status quo and then revealing the path to a better way, they set up a conflict that needs to be resolved,” writes Duarte. “That tension helps them persuade the audience to adopt a new mindset or behave differently.”

This type of structure aligns well with research results, and particularly results from usability tests. It provides evidence for “what is”—the problems that you’ve identified. And “what could be”—your recommendations on how to address them. And so on and so forth.

You can reinforce your recommendations with examples of things that competitors are doing that could address these issues or with examples where competitors are gaining an edge. Or they can be visual, like quick mockups of how a new design could look that solves a problem. These can help generate conversation and momentum. And this continues until the end of the session when you’ve wrapped everything up in the conclusion by summarizing the main issues and suggesting a way forward. This is the part where you reiterate the main themes or problems and what they mean for the product—the denouement of the story. This stage gives stakeholders the next steps and hopefully the momentum to take those steps!

While we are nearly at the end of this story, let’s reflect on the idea that user research is storytelling. All the elements of a good story are there in the three-act structure of user research: 

• Act one: You meet the protagonists (the users) and the antagonists (the problems affecting users). This is the beginning of the plot. In act one, researchers might use methods including contextual inquiry, ethnography, diary studies, surveys, and analytics. The output of these methods can include personas, empathy maps, user journeys, and analytics dashboards.

• Act two: Next, there’s character development. There’s conflict and tension as the protagonists encounter problems and challenges, which they must overcome. In act two, researchers might use methods including usability testing, competitive benchmarking, and heuristics evaluation. The output of these can include usability findings reports, UX strategy documents, usability guidelines, and best practices.

• Act three: The protagonists triumph and you see what a better future looks like. In act three, researchers may use methods including presentation decks, storytelling, and digital media. The output of these can be: presentation decks, video clips, audio clips, and pictures. 

The researcher has multiple roles: they’re the storyteller, the director, and the producer. The participants have a small role, but they are significant characters (in the research). And the stakeholders are the audience. But the most important thing is to get the story right and to use storytelling to tell users’ stories through research. By the end, the stakeholders should walk away with a purpose and an eagerness to resolve the product’s ills. 

So the next time that you’re planning research with clients or you’re speaking to stakeholders about research that you’ve done, think about how you can weave in some storytelling. Ultimately, user research is a win-win for everyone, and you just need to get stakeholders interested in how the story ends.

I’ve lost count of the times when promising ideas go from being useless in a few months to being useless after working as a solution designer for too long to notice.

Financial goods, which is the industry in which I work, are no exception. It’s tempting to put as many features at the ceiling as possible and hope someone sticks because people’s true, hard-earned money is on the line, user expectations are high, and a crammed market. However, this strategy is a formula for disaster. Why, please:

The fatalities of feature-first growth

It’s easy to get swept up in the enthusiasm of developing innovative features when you start developing a financial product from scratch or are migrating existing client journeys from papers or telephony channels to online bank or mobile applications. They may think,” If I may only add one more thing that solves this particular person problem, they’ll enjoy me”! But what happens if you eventually encounter a roadblock as a result of your safety team’s negligence? not like it? When a battle-tested film isn’t as well-known as you anticipated or when it fails due to unforeseen difficulty?

The concept of Minimum Viable Product ( MVP ) comes into play in this context. Even though Jason Fried doesn’t usually refer to it that way, his podcast Rework and his book Getting Real frequently address this concept. An MVP is a product that offers only enough significance to your users to keep them interested, but not so much that it becomes difficult to keep up. Although the idea seems simple, it requires a razor-sharp eye, a brutal edge, and the courage to stand up for your position because” the Columbo Effect” makes it easy to fall for something when one always says” just one more thing …” to add.

The issue with most fund apps is that they frequently turn out to be reflections of the company’s internal politics rather than an experience created specifically for the customer. This implies that the priority is to provide as many features and functionalities as possible to satisfy the requirements and desires of competing inside sections as opposed to a distinct value statement that is focused on what people in the real world actually want. As a result, these products can very quickly became a mixed bag of misleading, related, and finally unhappy customer experiences—a feature salad, you might say.

The significance of the foundation

What is a better strategy, then? How may we create products that are user-friendly, firm, and, most importantly, stick?

The concept of “bedrock” comes into play in this context. The main component of your item that really matters to people is Bedrock. The foundation of worth and relevance over time is built upon it.

The core must be in and around the standard servicing journeys in the retail banking industry, which is where I work. People only look at their existing account once every five minutes, but they also look at it daily. They sign up for a credit card every year or two, but they check their stability and pay their bill at least once a quarter.

The key is in identifying the main tasks that people want to complete and working relentlessly to render them simple, reliable, and trustworthy.

How can you reach the foundation, though? By focusing on the” MVP” strategy, giving convenience precedence, and working iteratively toward a clear value proposition. This entails removing unneeded functions and putting the emphasis on providing genuine value to your users.

It also requires some nerve, as your coworkers might not always agree on your eyesight right away. And in some cases, it might even mean making it clear to consumers that you won’t be coming over to their home to prepare their meal. Sometimes you need to use the sporadic “opinionated user interface design” ( i .e. clunky workaround for edge cases ) to test a concept or to give yourself some more time to work on something more crucial.

Functional methods for creating financially successful items

What are the main learnings I’ve made from my own research and expertise?

1. What trouble are you trying to solve first and foremost with a distinct “why”? Whom? Before beginning any project, make sure your goal is completely clear. Make certain it also aligns with the goals of your business.
2. Avoid the temptation to put too many characteristics at once by focusing on one, key feature and focusing on getting that right before moving on to something else. Choose one that actually adds value, and work from there.
3. When it comes to financial products, simplicity is often over complexity. Eliminate unnecessary details and concentrate solely on what matters most.
4. Accept continuous iteration as Bedrock is a dynamic process rather than a fixed destination. Continuously collect user feedback, make product improvements, and advance in that direction.
5. Stop, look, and listen: You don’t just have to test your product during the delivery process; you must also test it repeatedly in the field. Use it for yourself. A/B tests are run. User feedback on Gatter. Talk to users and make adjustments accordingly.

The bedrock paradox

This is an intriguing paradox: sacrificing some of the potential for short-term growth in favor of long-term stability. But the payoff is worthwhile: products built with a focus on bedrock will outlive and outperform their rivals over time and provide users with long-term value.

How do you begin your journey to bedrock, then? Take it gradually. Start by identifying the essential components that your users actually care about. Concentrate on developing and improving a single, potent feature that delivers real value. And most importantly, test constantly because, whatever you think, Abraham Lincoln, Alan Kay, or Peter Drucker are all in the same boat! The best way to foretell the future is to create it, he said.