Blog

Several wealthy runners had come to the conclusion that it was impossible to run a mile in less than four hours in the 1950s. Riders had been attempting it since the later 19th century and were beginning to draw the conclusion that the human body just wasn’t built for the job.

However, on May 6, 1956, Roger Bannister caught anyone by surprise. It was a cold, damp morning in Oxford, England—conditions no one expected to give themselves to record-setting—and but Bannister did really that, running a mile in 3: 59.4 and becoming the first people in the history books to run a mile in under four hours.

The world today knew that the four-minute hour could be accomplished thanks to this change in the criterion. Bannister’s history lasted just forty-six days, when it was snatched aside by American sprinter John Landy. Finally, a year later, three runners all managed to cross the four-minute hurdle in the same culture. Since therefore, over 1, 400 walkers have actually run a mile in under four days, the current document is 3: 43.13, held by Moroccan performer Hicham El Guerrouj.

We accomplish a lot more when we think something is possible, and we only think it can be done when we see someone else doing it after all. As for human running speed, we also think there are the strictest requirements for how a website should do.

Establishing requirements for a green website

The key indicators of climate performance in most big sectors are pretty well established, such as power per square metre for homes and miles per gallon for cars. The tools and methods for calculating those measures are standardized as well, which keeps everyone on the same site when doing economic evaluations. However, we aren’t held to any specific environmental standards in the world of websites and apps, and we only recently have access to the tools and strategies we need to do so.

The main objective in green web layout is to reduce carbon emissions. However, it’s nearly impossible to accurately assess the CO₂ output of a online product. We didn’t measure the pollutants coming out of the exhaust valves on our laptops. The pollution coming from power plants that burn coal and oil are considerably away, out of sight, and out of mind. We have no way to track the particles from a website or app up to the power station where the light is being generated and really know the exact amount of house oil produced. What then do we do?

If we can‘t measure the actual carbon emissions, then we need to get what we can estimate. The following are the main elements that could be used as measures of coal emissions:

1. Transfer of data
2. Coal content of light

Let’s take a look at how we can use these indicators to calculate the energy use, and in turn the carbon footprint, of the sites and web applications we create.

Transfer of data

Most researchers use kilowatt-hours per gigabyte (k Wh/GB ) as a metric of energy efficiency when measuring the amount of data transferred over the internet when a website or application is used. This serves as a wonderful example of how much energy is consumed and how much carbon is released. As a rule of thumb, the more files transferred, the more electricity used in the data center, telecoms systems, and end users products.

The easiest way to calculate data transfer for a second visit for web pages is to measure the site weight, which is the page’s transfer size in kilobytes when someone first visits the page. It’s very easy to measure using the engineer equipment in any modern internet browser. Frequently, any web application’s overall data transfer statistics will be included in your web hosting account ( Fig. 2.1 ).

The great thing about website weight as a parameter is that it allows us to compare the effectiveness of web pages on a level playing field without confusing the issue with frequently changing traffic volumes.

A large scope is required to reduce page weight. By early 2020, the median page weight was 1.97 MB for setups the HTTP Archive classifies as “desktop” and 1.77 MB for “mobile”, with desktop increasing 36 percent since January 2016 and mobile page weights nearly doubling in the same period ( Fig 2.2 ). Image files account for the majority of this data transfer, making them the single biggest contributor to carbon emissions on a typical website.

History clearly shows us that our web pages can be smaller, if only we set our minds to it. While most technologies, including the underlying technology of the web like data centers and transmission networks, become more and more energy efficient, websites themselves become less effective as time goes on.

You might be aware of the project team’s focus on creating faster user experiences using the concept of performance budgeting. For example, we might specify that the website must load in a maximum of one second on a broadband connection and three seconds on a 3G connection. Performance budgets are upper limits rather than vague suggestions, much like speed limits while driving, so the goal should always be to come within budget.

Designing for fast performance does often lead to reduced data transfer and emissions, but it isn’t always the case. Page weight and transfer size are more objective and reliable benchmarks for sustainable web design, whereas web performance is frequently more about the subjective perception of load times than it is about the underlying system’s actual efficiency.

We can set a page weight budget in reference to a benchmark of industry averages, using data from sources like HTTP Archive. We can also use competitor page weights and the website’s current layout to compare it to. For example, we might set a maximum page weight budget as equal to our most efficient competitor, or we could set the benchmark lower to guarantee we are best in class.

We could start looking at the transferability of our web pages for repeat visitors if we want to take it one step further. Although page weight for the first time someone visits is the easiest thing to measure, and easy to compare on a like-for-like basis, we can learn even more if we start looking at transfer size in other scenarios too. For instance, repeat users who load the same page frequently will likely have a high percentage of the files cached in their browser, which means they won’t need to move all of the files back on subsequent visits. Likewise, a visitor who navigates to new pages on the same website will likely not need to load the full page each time, as some global assets from areas like the header and footer may already be cached in their browser. We can learn even more about how to optimize efficiency for users who regularly visit our pages by measuring transfer size at this next level of detail, which will also enable us to establish page weight budgets for situations that extend beyond the initial visit.

Page weight budgets are easy to track throughout a design and development process. Although they don’t directly disclose their data on energy consumption and carbon emissions, they do provide a clear indicator of efficiency in comparison to other websites. And as transfer size is an effective analog for energy consumption, we can actually use it to estimate energy consumption too.

In summary, less data transfer leads to more energy efficiency, which is a crucial component of reducing web product carbon emissions. The more efficient our products, the less electricity they use, and the less fossil fuels need to be burned to produce the electricity to power them. However, as we’ll see next, it’s important to take into account the source of that electricity because all web products require some.

Coal content of light

Regardless of energy efficiency, the level of pollution caused by digital products depends on the carbon intensity of the energy being used to power them. The term” carbon intensity” (gCO₂/k Wh ) is used to describe how much carbon dioxide is produced for each kilowatt-hour of electricity produced. This varies widely, with renewable energy sources and nuclear having an extremely low carbon intensity of less than 10 gCO₂/k Wh ( even when factoring in their construction ), whereas fossil fuels have very high carbon intensity of approximately ₂00–400 gCO₂/k Wh.

The majority of electricity is produced by national or state grids, where energy from a variety of sources is combined with various levels of carbon intensity. The distributed nature of the internet means that a single user of a website or app might be using energy from multiple different grids simultaneously, a website user in Paris uses electricity from the French national grid to power their home internet and devices, but the website’s data center could be in Dallas, USA, pulling electricity from the Texas grid, while the telecoms networks use energy from everywhere between Dallas and Paris.

Although we don’t have complete control over the energy supply of web services, we do have some control over where our projects are hosted. With a data center using a significant proportion of the energy of any website, locating the data center in an area with low carbon energy will tangibly reduce its carbon emissions. Danish startup Tomorrow reports and maps the user-provided data, and a look at their map demonstrates how, for instance, choosing a data center in France will have significantly lower carbon emissions than choosing a data center in the Netherlands ( Fig. 2.3 ).

Having said that, we don’t want to locate our servers too far away from our users; however, it takes energy to transmit data through the telecom’s networks, and the more energy is used, the further the data travels. Just like food miles, we can think of the distance from the data center to the website’s core user base as “megabyte miles” —and we want it to be as small as possible.

We can use website analytics to determine the country, state, or even city where our core user group is located and measure the distance between that location and the data center that our hosting company uses as a benchmark. This will be a somewhat fuzzy metric as we don’t know the precise center of mass of our users or the exact location of a data center, but we can at least get a rough idea.

For instance, if a website is hosted in London but the main audience is on the United States ‘ West Coast, we could look up the travel distance between London and San Francisco, which is 5,300 miles. That’s a long way! We can see how significantly lessening the distance and energy needed to transmit the data would be if it was hosted somewhere in North America, ideally on the West Coast. In addition, locating our servers closer to our visitors helps reduce latency and delivers better user experience, so it’s a win-win.

Reverting it to carbon emissions

If we combine carbon intensity with a calculation for energy consumption, we can calculate the carbon emissions of our websites and apps. A tool my team created accomplishes this by measuring the data transfer over the wire when a web page is loaded, calculating the associated electricity consumption, and then converting that data into a CO₂ figure ( Fig. ₂.4). It also factors in whether or not the web hosting is powered by renewable energy.

The Energy and Emissions Worksheet that comes with this book teaches you how to improve it and tailor the data more appropriately to your project’s unique features.

We could even expand our page weight budget by establishing carbon budgets as well with the ability to calculate carbon emissions for our projects. CO₂ is not a metric commonly used in web projects, we’re more familiar with kilobytes and megabytes, and can fairly easily look at design options and files to assess how big they are. Although translating that into carbon adds a layer of abstraction that isn’t as intuitive, carbon budgets do focus our minds on the main thing we’re trying to reduce, and this is in line with the main goal of sustainable web design: reducing carbon emissions.

Browser Energy

Transfer of data might be the simplest and most complete analog for energy consumption in our digital projects, but by giving us one number to represent the energy used in the data center, the telecoms networks, and the end user’s devices, it can’t offer us insights into the efficiency in any specific part of the system.

One part of the system we can look at in more detail is the energy used by end users ‘ devices. The computational load is increasingly shifting from the data center to users ‘ devices, whether they are phones, tablets, laptops, desktops, or even smart TVs, as front-end web technologies advance. Modern web browsers allow us to implement more complex styling and animation on the fly using CSS and JavaScript. Additionally, JavaScript libraries like Angular and React allow us to create applications where the” thinking” process is performed either partially or completely in the browser.

All of these advances are exciting and open up new possibilities for what the web can do to serve society and create positive experiences. However, more computation in a web browser requires more energy to be used by the user’s devices. This has implications not just environmentally, but also for user experience and inclusivity. Applications that put a lot of processing power on a user’s device unintentionally exclude those who have older, slower devices and make the batteries on phones and laptops drain more quickly. Furthermore, if we build web applications that require the user to have up-to-date, powerful devices, people throw away old devices much more frequently. The poorest members of society are also under disproportionate financial burdens due to this, which is not just bad for the environment.

In part because the tools are limited, and partly because there are so many different models of devices, it’s difficult to measure website energy consumption on end users ‘ devices. The Energy Impact monitor inside the Safari browser’s developer console ( Fig. 2.5 ) is one of the tools we currently use.

You are aware of the moment your computer’s cooling fans start spinning so frantically that you mistakenly believe it might take off when you load a website? That’s essentially what this tool is measuring.

It uses these figures to create an energy impact rating and shows how much CPU is used and how long it takes to load the web page. It doesn’t give us precise data for the amount of electricity used in kilowatts, but the information it does provide can be used to benchmark how efficiently your websites use energy and set targets for improvement.

This section will provide you with that plan of action. It covers how to incorporate safety principles into your design work in order to make tech that’s secure, how to persuade your stakeholders that this work is important, and how to respond to the critique that what we really need is more diversity. ( Spoiler: we do, but diversity alone is not the solution to fixing unethical, unsafe technology. )

The procedure for equitable safety

Your objectives when designing for protection are to:

• discover ways your solution can be used for abuse,
• style ways to prevent the maltreatment, and
• offer assistance for harmed people to regain control and power.

The Process for Inclusive Safety is a tool to help you reach those goals ( Fig 5.1 ). It’s a method I developed in 2018 to better understand the different methods I used to create products that were designed with safety in mind. Whether you are creating an entirely new product or adding to an existing element, the Process can help you produce your product secure and diverse. The Process includes five public areas of action:

• conducting studies
• Creating tropes
• Pondering issues
• Designing options
• Testing for security

The Process is meant to be flexible; in some situations, it didn’t make sense for groups to employ every step. Use the parts that are related to your special function and environment, this is meant to be something you can put into your existing style process.

And once you use it, if you have an idea for making it better or simply want to give perspective of how it helped your staff, please get in touch with me. It’s a living document, and I want to use it as a practical and useful application for engineers in their day-to-day tasks.

If you’re working on a product especially for a resilient team or survivors of some form of injury, such as an application for survivors of domestic violence, sexual abuse, or drug addiction, be sure to read Section 7, which covers that position directly and should be handled a bit different. The purpose of this design is to prioritize safety when creating a more general product with a broad user base ( which, as we already know from statistics, will include some groups who need to be protected from harm ). Chapter 7 is focused on products that are specifically for vulnerable groups and people who have experienced trauma.

Step 1: Conduct research

A thorough analysis of how your technology might be used to abuse people as well as a detailed analysis of the experiences of those who have survived and perpetrated that kind of abuse should be included in the design research. At this stage, you and your team will investigate issues of interpersonal harm and abuse, and explore any other safety, security, or inclusivity issues that might be a concern for your product or service, like data security, racist algorithms, and harassment.

broad research

Your project should begin with broad, general research into similar products and issues around safety and ethical concerns that have already been reported. For example, a team building a smart home device would do well to understand the multitude of ways that existing smart home devices have been used as tools of abuse. If your product involves artificial intelligence, make sure to learn about the potential for racism and other issues that have been reported in other AI products. Nearly all types of technology have some kind of potential or actual harm that’s been reported on in the news or written about by academics. For these studies, Google Scholar is a useful resource.

Specific research: Survivors

When possible and appropriate, include direct research ( surveys and interviews ) with people who are experts in the forms of harm you have uncovered. In order to have a better understanding of the subject and be better positioned to prevent retraumatize survivors, you should interview advocates working in the area of your research first. If you’ve uncovered possible domestic violence issues, for example, the experts you’ll want to speak with are survivors themselves, as well as workers at domestic violence hotlines, shelters, other related nonprofits, and lawyers.

It is important to pay people for their knowledge and lived experiences, especially when interviewing survivors of any kind of trauma. Don’t ask survivors to share their trauma for free, as this is exploitative. While some survivors may not want to be paid, you should always make the offer in the initial ask. As an alternative to paying, you can donate to a group fighting against the violence the interviewee experienced. We’ll talk more about how to appropriately interview survivors in Chapter 6.

Specific research: Abusers

It’s unlikely that teams aiming to design for safety will be able to interview self-proclaimed abusers or people who have broken laws around things like hacking. Don’t make this a goal, rather, try to get at this angle in your general research. Describe the ways that abusers or bad actors use technology to harm others, how they use it to silence others, and how they justify or explain the abuse.

Step 2: Create archetypes

Use your research after you’ve finished conducting it to create abuser and survivor archetypes. Archetypes are not personas, as they’re not based on real people that you interviewed and surveyed. Instead, they’re based on your research into likely safety issues, much like when we design for accessibility: we don’t need to have found a group of blind or low-vision users in our interview pool to create a design that’s inclusive of them. Instead, we base those designs on existing research and what this group requires. Personas typically represent real users and include many details, while archetypes are broader and can be more generalized.

The abuser archetype is defined as someone who views a product as a means of harm ( Fig. 5.2 ). They may be trying to harm someone they don’t know through surveillance or anonymous harassment, or they may be trying to control, monitor, abuse, or torment someone they know personally.

Someone who is being abused with the product is the survivor archetype. There are various situations to consider in terms of the archetype’s understanding of the abuse and how to put an end to it: Do they need proof of abuse they already suspect is happening, or are they unaware they’ve been targeted in the first place and need to be alerted ( Fig 5.3 )?

You may want to make multiple survivor archetypes to capture a range of different experiences. They may be aware of the abuse being occurring but not be able to stop it, such as when a stalker keeps tracing their whereabouts or when an abuser locks them out of IoT devices ( Fig. 5.4). Include as many of these scenarios as you need to in your survivor archetype. You’ll use these later when you create solutions to help your survivor archetypes achieve their objectives of preventing and ending abuse.

It may be useful for you to create persona-like artifacts for your archetypes, such as the three examples shown. Focus on their objectives rather than the demographic details we frequently see in personas. The goals of the abuser will be to carry out the specific abuse you’ve identified, while the goals of the survivor will be to prevent abuse, understand that abuse is happening, make ongoing abuse stop, or regain control over the technology that’s being used for abuse. Later, you’ll think about how to help the survivor’s goals and the abuser’s goals.

And while the “abuser/survivor” model fits most cases, it doesn’t fit all, so modify it as you need to. For example, if you uncovered an issue with security, such as the ability for someone to hack into a home camera system and talk to children, the malicious hacker would get the abuser archetype and the child’s parents would get survivor archetype.

Step 3: Remind yourself of your issues

After creating archetypes, brainstorm novel abuse cases and safety issues. You’re trying to identify entirely new safety issues that are unique to your product or service by using the term” Novel” in terms of things that are not discovered in your research. The goal with this step is to exhaust every effort of identifying harms your product could cause. You aren’t worrying about how to prevent the harm yet—that comes in the next step.

How else could your product be used for any kind of abuse besides what you’ve already found in your research? I recommend setting aside at least a few hours with your team for this process.

Try conducting a Black Mirror brainstorming session if you want to start somewhere. This exercise is based on the show Black Mirror, which features stories about the dark possibilities of technology. Try to figure out how your product would be used in an episode of the show—the most wild, awful, out-of-control ways it could be used for harm. Participants typically end up having a good deal of fun when I’ve led Black Mirror brainstorms ( which I think is great because having fun when designing for safety! ). I recommend time-boxing a Black Mirror brainstorm to half an hour, and then dialing it back and using the rest of the time thinking of more realistic forms of harm.

After identifying as many opportunities for abuse as you can, you may still not feel confident that you have found every potential source of harm. A healthy amount of anxiety is normal when you’re doing this kind of work. It’s common for teams designing for safety to worry,” Have we really identified every possible harm? What if something is missing, then? If you’ve spent at least four hours coming up with ways your product could be used for harm and have run out of ideas, go to the next step.

It’s impossible to say 100 % assurance that you’ve done everything right, but instead of aiming for 100 % assurance, acknowledge that you’ve taken this step and have done everything you can, and pledge to keep putting safety first in the future. Once your product is released, your users may identify new issues that you missed, aim to receive that feedback graciously and course-correct quickly.

Step 4: Design solutions

You should now be able to identify potential harm-causing uses for your product as well as survivor and abuser archetypes describing opposing user objectives. The next step is to identify ways to design against the identified abuser’s goals and to support the survivor’s goals. This is a good addition to existing design processes where you’re making recommendations for solutions to the various issues your research has identified.

Some questions to ask yourself to help prevent harm and support your archetypes include:

• Can you design your product in such a way that the identified harm cannot happen in the first place? If not, what barriers can you place to stop the harm from occurring?
• How can you make the victim aware that abuse is happening through your product?
• How can you assist the victim in understanding what they need to do to stop the problem?
• Can you identify any types of user activity that would indicate some form of harm or abuse? Could your product help the user access support?

In some products, it’s possible to proactively detect harm is occurring. For example, a pregnancy app might be modified to allow the user to report that they were the victim of an assault, which could trigger an offer to receive resources for local and national organizations. Although it’s not always possible to be this proactive, it’s worthwhile to spend a half hour talking about how your product could help the user receive help in a safe manner if any kind of user activity would indicate some form of harm or abuse.

That said, use caution: you don’t want to do anything that could put a user in harm’s way if their devices are being monitored. If you do offer some kind of proactive help, always make it voluntary, and think through other safety issues, such as the need to keep the user in-app in case an abuser is checking their search history. In the next chapter, we’ll examine a good illustration of this.

Step 5: Test for safety

The final step is to evaluate your prototypes from the perspective of your archetypes, who wants to harm the product and the victim of the harm who needs to regain control over the technology. Just like any other kind of product testing, at this point you’ll aim to rigorously test out your safety solutions so that you can identify gaps and correct them, validate that your designs will help keep your users safe, and feel more confident releasing your product into the world.

Ideally, safety testing happens along with usability testing. If you work for a company that doesn’t conduct usability testing, you might be able to use safety testing to deftly perform both. A user who uses your design while trying to use it against someone else can also be encouraged to point out interactions or other design details that don’t make sense to them.

You’ll want to conduct safety testing on either your final prototype or the actual product if it’s already been released. There is no harm in testing an existing product that wasn’t created with safety goals in mind right away; “etrofitting” it for safety is a wise thing to do.

Remember that testing for safety involves testing from the perspective of both an abuser and a survivor, though it may not make sense for you to do both. Alternatively, if you made multiple survivor archetypes to capture multiple scenarios, you’ll want to test from the perspective of each one.

You as the designer are probably too closely acquainted with the product and its design at this point, just like other usability testing techniques, and you know the product too well. Instead of doing it yourself, set up testing as you would with other usability testing: find someone who is not familiar with the product and its design, set the scene, give them a task, encourage them to think out loud, and observe how they attempt to complete it.

Abuse testing

The goal of this testing is to understand how easy it is for someone to weaponize your product for harm. Unlike with usability testing, you want to make it impossible, or at least difficult, for them to achieve their goal. Use your product to try to accomplish the objectives in the abuser archetype you created earlier.

For example, for a fitness app with GPS-enabled location features, we can imagine that the abuser archetype would have the goal of figuring out where his ex-girlfriend now lives. With this in mind, you’d make every effort to discover the location of a different user who has their privacy settings turned on. You might try to see her running routes, view any available information on her profile, view anything available about her location ( which she has set to private ), and investigate the profiles of any other users somehow connected with her account, such as her followers.

If by the end of this you’ve managed to uncover some of her location data, despite her having set her profile to private, you know now that your product enables stalking. Reverting to step 4 and figuring out how to stop this from occurring is your next step. You may need to repeat the process of designing solutions and testing them more than once.

Survivor testing

Survivor testing involves identifying how to give information and power to the survivor. It might not always make sense based on the product or context. The survivor archetype’s goal of not being stalked is satisfied by preventing an attempt by an abuser archetype to stalk someone, so separate testing from the survivor’s perspective wouldn’t be required.

However, there are cases where it makes sense. A survivor archetype’s goal, for instance, would be to discover what causes the temperature change when they aren’t altering it themselves. You could test this by looking for the thermostat’s history log and checking for usernames, actions, and times, if you couldn’t find that information, you would have more work to do in step 4.

Another goal might be regaining control of the thermostat once the survivor realizes the abuser is remotely changing its settings. Are there any instructions that explain how to remove a user and change the password, and are they simple to locate? For your test, this would involve trying to figure out how to do this. This might again reveal that more work is needed to make it clear to the user how they can regain control of the device or account.

Stress testing

To make your product more inclusive and compassionate, consider adding stress testing. This concept comes from Design for Real Life by Eric Meyer and Sara Wachter-Boettcher. The authors noted that personas typically focus on happy people, but that happy people are frequently anxious, stressed out, unhappy, or even go through a bad day. These are called” stress cases”, and testing your products for users in stress-case situations can help you identify places where your design lacks compassion. More information about how to incorporate stress cases into your design can be found in Design for Real Life, as well as in many other effective methods for designing with compassion.

How can a content management system ( CMS ) be set up to reach your current and future audience? I learned the hard way that creating a content model—a concept of information types, attributes, and relationships that let people and systems understand content—with my more comfortable design-system wondering would collapse my patient’s holistic information strategy. By developing conceptual information models that also connect related content, you can avoid that result.

I just had the opportunity to lead a Fortune 500 company’s CMS execution. The customer was excited by the benefits of an holistic information plan, including material modify, multichannel marketing, and robot delivery—designing content to be comprehensible to bots, Google knowledge panels, snippets, and voice user interfaces.

A content type is essential for an omnichannel articles strategy, and the model needed conceptual types, which are types of types that are categorized according to their meaning rather than their presentation. Our goal was to allow writers to create original content that could be used wherever they felt was most useful. But as the job proceeded, I realized that supporting material utilize at the range that my client needed required the whole group to identify a new pattern.

Despite our best efforts, we remained influenced by design techniques, which we were more comfortable with. An holistic content strategy cannot rely on WYSIWYG design and layout tools, unlike web-focused material strategies. Our tendency to approach the material model with our common design-system thinking frequently led us to veer away from one of the main purposes of a material model: delivering content to audiences on various marketing channels.

Two fundamental tenets govern a successful content model

We needed to explain to our designers, developers, and stakeholders that we were undertaking a very different task from their earlier web projects, where it was common for everyone to view content as visual building blocks that fit into layouts. The previous approach was not only more familiar but also more intuitive—at least at first—because it made the designs feel more tangible. We discovered two guiding principles that helped the team understand how a content model and the design processes we were familiar with were:

1. Instead of layout, content models must define semantics.
2. And content models should connect content that belongs together.

Semantic content models

A semantic content model uses type and attribute names that reflect the content’s intended purpose and not its intended display. For example, in a nonsemantic model, teams might create types like teasers, media blocks, and cards. These types may make it simple to present content, but they do not aid in understanding the meaning of the content, which would have opened the door to the content presented in each marketing channel. In contrast, a semantic content model employs type names like product, service, and testimonial to allow for each delivery channel to interpret the content and use it as necessary.

When you’re creating a semantic content model, a great place to start is to look over the types and properties defined by Schema. a community-driven resource for type definitions that are understandable on platforms like Google search.

Benefits of a semantic content model include:

Even if your team doesn’t care about omnichannel content, a semantic content model decouples content from its presentation so that teams can evolve the website’s design without needing to refactor its content. Content can withstand obtrusive website redesigns in this way.
• A semantic content model also gives you an advantage in the market. By adding structured data based on Schema. Using its types and properties, a website can provide hints to help Google understand the content, display it in search snippets or knowledge panels, and use it to respond to voice-interface user questions. Without ever visiting your website, potential visitors could easily find your content.
• Beyond those practical benefits, you’ll also need a semantic content model if you want to deliver omnichannel content. Delivery channels must be able to understand the same content in order to use it across multiple marketing channels. For instance, if your content model provided a list of questions and answers, it could be easily displayed on a frequently asked questions ( FAQ ) page as well as be used by a bot to answer frequently asked questions.

For example, using a semantic content model for articles, events, people, and locations lets A List Apart provide cleanly structured data for search engines so that users can read the content on the website, in Google knowledge panels, and even with hypothetical voice interfaces in the future.

connective content models

Instead of slicing up related content across disparate content components, I’ve come to the realization that the best models are those that are semantic and also connect related content components ( such as a FAQ item’s question and answer pair ). A good content model connects content that should remain together so that multiple delivery channels can use it without needing to first put those pieces back together.

Consider creating an essay or article. The meaning and usefulness of an article depend on how well its components are kept together. Would one of the headings or paragraphs be meaningful on their own without the context of the full article? Our well-versed in designing systems frequently led us to want to develop content models that would break content into smaller pieces to fit the web-centric layout. This had a similar effect to an article that had had its headline removed. Because we were slicing content into standalone pieces based on layout, content that belonged together became difficult to manage and nearly impossible for multiple delivery channels to understand.

Let’s examine how connecting related content can be used in a practical setting to illustrate. The client’s design team created a challenging layout for a software product page that included numerous tabs and sections. Our instincts were to follow suit with the content model. Shouldn’t we make adding any number of tabs in the future as simple and as flexible as possible?

We felt like we needed a content type called “tab section” because our design-system instincts were so well-known, so that multiple tab sections could be added to a page. Each tab section would display various types of content. The software’s overview or specifications might be available in one tab. A list of resources might be provided by another tab.

Our inclination to break down the content model into “tab section” pieces would have led to an unnecessarily complex model and a cumbersome editing experience, and it would have also created content that couldn’t have been understood by additional delivery channels. How would another system have resorted to counting tab sections and content blocks, for instance, if it had been able to identify a product’s “tab section” when referring to its specifications or resource list? This would have prevented the tabs from ever being rearranged, and it would have required adding logic to each other delivery channel to interpret the layout of the design system. Furthermore, if the customer were to have no longer wanted to display this content in a tab layout, it would have been tedious to migrate to a new content model to reflect the new page redesign.

Our customer had a breakthrough when we realized that for each tab, their customer had a specific purpose in mind: it would reveal specific information like the software product’s overview, specifications, related resources, and pricing. Once implementation began, our inclination to focus on what’s visual and familiar had obscured the intent of the designs. It wasn’t long after a little digging that it became clear that the idea of tabs wasn’t applicable to the content model. What was important was the meaning of the information that was intended to be displayed in the tabs.

In fact, the customer could have decided to display this content in a different way—without tabs—somewhere else. In response to this realization, we decided to create content types for the software product based on the meaningful qualities the client wanted to display on the web. There were both obvious semantic attributes like name and description and rich ones like screenshots, software requirements, and feature lists. The software’s product information stayed together because it wasn’t sliced across separate components like “tab sections” that were derived from the content’s presentation. Any delivery channel, including those that follow, could comprehend and display this content.

Conclusion

In this omnichannel marketing project, we discovered that the best way to keep our content model on track was to ensure that it was semantic ( with type and attribute names that reflected the meaning of the content ) and that it kept content together that belonged together ( instead of fragmenting it ). These two ideas made it easier for us to decide what to do with the content model based on the design. Remember: If you’re developing a content model to support an omnichannel content strategy, or even if you just want to make sure Google and other interfaces understand your content, remember:

• A design system isn’t a content model. You should maintain the semantic value and contextual structure of the content strategy throughout the entire implementation process because team members might be tempted to combine them and to make your content model resemble your design system. Without the use of a magic decoder ring, every delivery channel will be able to consume the content.
• If your team is struggling to make this transition, you can still reap some of the benefits by using Schema. Your website uses structured data from org. The benefit of search engine optimization is a compelling reason on its own, even if additional delivery channels aren’t on the horizon in the near future.
• Additionally, remind the team that decoupling the content model from the design will let them update the designs more easily because they won’t be held back by the cost of content migrations. They’ll be able to create new designs without compromising the compatibility between the content and the design, and they’ll be prepared for the upcoming big thing.

By firmly defending these ideas, you’ll help your team view content as the most important component of your user experience and as the most effective way to engage with your audience.

Here’s the key. You must engage stakeholders to determine high-risk conclusions and buried complexity, so that they can become just as motivated as you are to receive responses from users. Essentially, you need to make them think it’s their plan.

By bringing the group up around two straightforward issues, I’ll show you how to collectively introduce alignment and cracks in the team’s shared knowledge.

1. What are the materials?
2. What are the associations between those things?

A cross between camera design and analysis

These two issues correlate to the first two methods of the ORCA approach, which may be your new best friend when it comes to reducing speculation. Delay, what’s ORCA? Glad you asked.

ORCA stands for Things, Relationships, CTAs, and Values, and it outlines a process for creating good object-oriented user experience. My style philosophy is based on object-oriented UX. ORCA is an iterative strategy for synthesizing person study into an elegant fundamental foundation to help monitor and conversation design. My work as a UX designer has become more creative, productive, successful, fun, proper, and meaningful thanks to OOUX and ORCA.

The ORCA process has four iterative rounds and a whopping fifteen steps. In each round we get more clarity on our Os, Rs, Cs, and As.

ORCA is sometimes described as a “garbage in, garbage out” procedure. To ensure that the testable prototype produced in the final round actually tests well, the process needs to be fed by good research. The ORCA process’s beginning serves another purpose: it enables you to justify the need for research if you don’t have a lot of it.

In other words, the ORCA process serves as a gauntlet between research and design. You can gracefully ride the killer whale from research to design with good research. But without good research, the process effectively spits you back into research and with a cache of specific open questions.

Getting back in the same curiosity-boat

What gets us into trouble is not what we don’t know. It’s what we know for sure that just ain’t so.

Mark Twain

The first two steps of the ORCA process—Object Discovery and Relationship Discovery—shine a spotlight on the dark, dusty corners of your team’s misalignments and any inherent complexity that’s been swept under the rug. It begins to reveal what this timeless comic so skillfully demonstrates:

This is one reason why so many UX designers are frustrated in their job and why many projects fail. Every decision-maker is confident in their own mental picture, which is another reason why we frequently can’t sell research.

Once we expose hidden fuzzy patches in each picture and the differences between them all, the case for user research makes itself.

However, how we go about doing this is crucial. However much we might want to, we can’t just tell everyone,” YOU ARE WRONG”! Instead, we need to facilitate and guide our team members to self-identify holes in their picture. When stakeholders accept responsibility for their beliefs and understanding gaps, BAM! Suddenly, UX research is not such a hard sell, and everyone is aboard the same curiosity-boat.

Let’s say your users are physicians. And you have no idea how doctors use the system you are tasked with redesigning.

You might try to sell research by honestly saying:” We need to understand doctors better! What bothers them the most? How do they use the current app”? Here’s the issue with that, though. Those questions are vague, and the answers to them don’t feel acutely actionable.

Instead, you want your stakeholders themselves to ask super-specific questions. This is more similar to the conversation you need to facilitate. Let’s listen in:

” Wait a sec, how frequently do doctors share patients?” Does a patient in this system have primary and secondary doctors”?

” Can a patient even have more than one primary doctor”?

Is it a “primary doctor” or just a “primary caregiver” ?Can’t that position be considered a nurse practitioner?

” No, caregivers are something else… That’s the patient’s family contacts, right”?

Are caregivers included in this redesign, then?

” Yeah, because if a caregiver is present at an appointment, the doctor needs to note that. Like, tag the caregiver on the note… Or on the appointment”?

We are currently going somewhere. Do you see how powerful it can be getting stakeholders to debate these questions themselves? The diabolical goal is to gently and diplomatically shake their confidence.

When these kinds of questions bubble up collaboratively and come directly from the mouths of your stakeholders and decision-makers, suddenly, designing screens without knowing the answers to these questions seems incredibly risky, even silly.

If we create software without understanding the real-world information environment of our users, we will likely create software that does not align to the real-world information environment of our users. And most likely as a result of this, software will be more confusing, complicated, and less intuitive.

The two questions

But how do we approach these contentious issues diplomatically, effectively, collaboratively, and reliably?

We can do this by starting with those two big questions that align to the first two steps of the ORCA process:

1. What are the materials?
2. What are the associations between those things?

In practice, getting to these answers is easier said than done. I’m going to demonstrate how these two straightforward questions can serve as the starting point for an Object Definition Workshop. During this workshop, these” seed” questions will blossom into dozens of specific questions and shine a spotlight on the need for more user research.

Noun foraging prep work

In the next section, I’ll show you how to run an Object Definition Workshop with your stakeholders ( and entire cross-functional team, hopefully ). But first, you need to do some prep work.

In essence, look for nouns that are specific to the subject matter or industry of your project and use at least a few sources. I call this noun foraging.

Just a few excellent noun foraging sources can be found here:

• the product’s marketing site
• the product’s competitors ‘ marketing sites ( competitive analysis, anyone? )
• the already-existing product ( check the labels )!
• user interview transcripts
• vision documents or notes from stakeholder interviews

Put your detective hat on, my dear Watson. Get resourceful and leverage what you have. Use those if all you have is a marketing website, some screenshots of the current legacy system, and access to customer service chat logs.

As you peruse these sources, watch for the nouns that are used over and over again, and start listing them ( preferably on blue sticky notes if you’ll be creating an object map later! …

You’ll want to focus on nouns that might represent objects in your system. If you are having trouble determining if a noun might be object-worthy, remember the acronym SIP and test for:

1. Structure
2. Instances
3. Purpose

Consider, for instance, a library app. Is “book” an object?

Can you think of a few attributes for this potential object? Title, author, publish date … Yep, it has structure. Check!

What are some illustrations of this potential “book” object, for instance? Can you name a few? Check out The Alchemist, Ready Player One, and Everybody Poops!

Purpose: why is this object important to the users and business? Well, “book” is what our library client is providing to people and books are why people come to the library … Check, check, check!

Focus on capturing the nouns that have SIP as you are noun foraging. Avoid capturing components like dropdowns, checkboxes, and calendar pickers—your UX system is not your design system! Components are just the packaging for objects—they are a means to an end. No one is using your dropdown to play in your digital space! They are coming for the VALUABLE THINGS and what they can do with them. We are attempting to identify those things or objects.

Let’s say we work for a startup disrupting the email experience. This is how I’d start my noun foraging.

I’d first take a look at my own email client, which turns out to be Gmail. I’d then look at Outlook and the new HEY email. I would examine Hotmail, Yahoo, and even Basecamp and other’email replacers’. I’d read some articles, reviews, and forum threads where people are complaining about email. While doing all this, I would look for and write down the nouns.

( Before moving on, feel free to go noun foraging for this fictitious product as well, and then scroll down to see how closely our lists correspond. Just don’t get lost in your own emails! Rejoice to me again!

Drumroll, please…

Here are a few nouns I came up with during my noun foraging:

• email message
• thread
• contact
• client
• rule/automation
• email address that is not a contact?
• contact groups
• attachment
• Google doc file / other integrated file
• newsletter? ( HEY views this in a different way )
• saved responses and templates

Scan your list of nouns and pick out words that you are completely clueless about. It might be automation or a client in our email example. Do as much homework as you can before your session with stakeholders: google what’s googleable. But other terms might be so specific to the product or domain that you need to have a conversation about them.

Aside: Here are some authentic nouns that my stakeholders in my own past project work needed to clarify:

• Record Locator
• Home Incentive
• Augmented Line Item
• Curriculum-Based Measurement Probe

A list of nouns that represent potential objects and a short list of nouns that need to be further defined are really all you need to prepare for the workshop session.

Facilitate an Object Definition Workshop

You could start your workshop by doing noun foraging; this can be done in concert. If you have five people in the room, pick five sources, assign one to every person, and give everyone ten minutes to find the objects within their source. When the time’s up, come together and find the overlap. Your friend here is affinity mapping!

If your team is short on time and might be reluctant to do this kind of grunt work ( which is usually the case ) do your own noun foraging beforehand, but be prepared to show your work. I enjoy showing screenshots of documents and screens that have all the highlighted nouns. Bring the artifacts of your process, and start the workshop with a five-minute overview of your noun foraging journey.

HOT TIP: before jumping into the workshop, frame the conversation as a requirements-gathering session to help you better understand the scope and details of the system. You don’t need to tell them you‘re looking for gaps in the team’s understanding so that you can demonstrate the need for more user research; that will be our little secret. Instead, go into the session optimistically, as if your knowledgeable stakeholders and PMs and biz folks already have all the answers.

Let the whack-a-mole question then start.

1. What is this thing?

Want to have some genuine fun? At the beginning of your session, ask stakeholders to privately write definitions for the handful of obscure nouns you might be uncertain about. Then, have everyone present their cards at once, and see if there are any (you will ) definitions. This is gold for exposing misalignment and starting great conversations.

As your discussion unfolds, capture any agreed-upon definitions. And when uncertainty sets in, quietly ( but clearly ) begin an “open questions” parking lot. � �

Here’s a fantastic follow-up after definitions solidify:

2. Do our users know what these things are? What is the name of this object?

Stakeholder 1: They probably call email clients “apps”. But I’m not certain.

Stakeholder 2: Automations are often called “workflows”, I think. Or, maybe users think workflows are something different.

Ask the group if they can agree to use only that term as they go along if a more user-friendly term comes up. This way, the team can better align to the users ‘ language and mindset.

Okay, let’s get started.

If you have two or more objects that seem to overlap in purpose, ask one of these questions:

3. Do they share the same name? Or are these different? How are they different if they are different from one another?

You: Is a saved response the same as a template?

Stakeholder 1: Yes! Absolutely.

Stakeholder 2: I don’t think so… A saved response is text with links and variables, but a template is more about the look and feel, like default fonts, colors, and placeholder images.

Continue to expand your expanding glossary of terms. And continue to capture areas of uncertainty in your “open questions” parking lot.

If you successfully determine that two similar things are, in fact, different, here’s your next follow-up question:

4. What’s the relationship between these objects?

You: Do saved responses and templates have any connection to each other?

Stakeholder 3: Yeah, a template can be applied to a saved response.

You, always with the follow-ups: When is the template applied to a saved response? Does that occur when the user is creating the saved response? Or when they apply the saved response to an email? How does that actually operate?

Listen. Capture uncertainty. When the number of “open questions” reaches a critical mass, pause to begin asking questions of groups or individuals. Some questions might be for the dev team ( hopefully at least one developer is in the room with you ). One question might be specific for someone who was unable to attend the workshop. And many questions will need to be labeled “user”.

Do you see how we are building up to our UXR sales pitch?

5. Is this object in scope?

Your next query makes it easier for the team to concentrate on what your users are most interested in. You can simply ask,” Are saved responses in scope for our first release”?, but I’ve got a better, more devious strategy.

By now, you should have a list of clearly defined objects. Ask participants to arrange these items either in small breakout groups or independently according to their importance. Then, like you did with the definitions, have everyone reveal their sort order at once. Unsurprisingly, it’s not unusual for the VP to place something like” saved responses” at the top of the list while everyone else places it at the bottom. Try not to look too smug as you inevitably expose more misalignment.

I did this for a startup a few years ago. The three groups ‘ wildly different sorting patterns were displayed on the whiteboard.

The CEO sat back, examined it, and said,” This is why we haven’t been able to move forward in two years.”

Admittedly, it’s tragic to hear that, but as a professional, it feels pretty awesome to be the one who facilitated a watershed realization.

Once you have a good idea of in-scope, clearly defined things, this is when you move on to doing more relationship mapping.

6. Create a visual representation of the objects ‘ relationships

We’ve already done this before figuring out what two things might be different, but this time, we’ll ask the team about every possible connection. For each object, ask how it relates to all the other objects. In what ways are the objects connected? Use your dependable boxes and arrows technique to make the connections all recognizable. Here, we are connecting our objects with verbs. I prefer to use simple statements like “has a” and “has many.”

This system modeling activity brings up all sorts of new questions:

• Can attachments be included in a saved response?
• Can a saved response use a template? If so, can the recipient override the template if an email uses a saved response with a template?
• Do users want to see all the emails they sent that included a particular attachment? For example,” show me all the emails I sent with ProfessionalImage. attached .jpg I’ve changed my professional photo and I want to alert everyone to update it”.

Strong responses might come directly from the workshop participants. Great! Capture that new shared understanding. However, as uncertainty arises, keep adding new questions to your expanding parking lot.

Light the fuse

You’ve set up the floodgates strategically so that the explosives can be seen everywhere. Now you simply have to light the fuse and BOOM. Watch the buy-in for user research flooooow.

Have the group reflect on the list of open questions before the workshop ends. Make plans for getting answers internally, then focus on the questions that need to be brought before users.

Your final step is now. Take those questions you’ve compiled for user research and discuss the level of risk associated with NOT answering them. Ask, “if we design without an answer to this question, if we make up our own answer and we are wrong, how bad might that turn out”?

With this approach, we are cornering our decision-makers into supporting user research because they themselves categorize questions as high-risk. Sorry, not sorry.

Your moment of truth is right now. With everyone in the room, ask for a reasonable budget of time and money to conduct 6–8 user interviews focused specifically on these questions.

HOT TIP: if you are new to UX research, please note that you’ll likely need to rephrase the questions that came up during the workshop before you present them to users. Make sure your questions are non-repeated and don’t force the user to choose any default responses.

Final words: Hold the screen design!

Seriously, if at all possible, if you never design screens again without first addressing these fundamental inquiries: what are the objects and how do they relate?

I promise you this: if you can secure a shared understanding between the business, design, and development teams before you start designing screens, you will have less heartache and save more time and money, and ( it almost feels like a bonus at this point! ) users will be more receptive to what you put out into the world.

I sincerely hope this will give you the time and money to spend talking to your users and getting a clear understanding of what you are designing before you begin creating screens. If you find success using noun foraging and the Object Definition Workshop, there’s more where that came from in the rest of the ORCA process, which will help prevent even more late-in-the-game scope tugs-of-war and strategy pivots.

Wish you the best of luck! Now go sell research!

Containers are used to style CSS. In fact, the whole website is made of containers, from the website viewport to components on a webpage. However, every now and then a new element appears that prompts us to reevaluate our design philosophy.

Square features, for instance, make it fun to play with round picture areas. Mobile display holes and electronic keyboards offer issues to best manage content that stays clear of them. And having two or more portable devices forces us to reevaluate how to make the most of the available space in a variety of different device positions.

The design of products has become more challenging and interesting as a result of new changes to the web platform. They’re wonderful opportunities for us to break out of our triangular containers.

I’d like to talk about a new feature similar to the above: the Window Controls Overlay for Progressive Web Apps ( PWAs ).

Liberal Web Apps are bridging the gap between websites and apps. They combine the best of both worlds. On the one hand, they are flexible, relatable, and stable, just like websites. On the other hand, they provide more effective features, work online, and read documents just like local apps.

As a style area, PWAs are really exciting because they challenge us to think about what mixing online and device-native user interface can get. We have more than 40 years of experience telling us what software may look like, especially on desktop computers, and it’s challenging to get out of this psychological design.

At the end of the day though, PWAs on desktops are constrained to the glass they appear in: a square with a name bar at the top.

What a standard desktops PWA app looks like:

Sure, as the author of a PWA, you get to choose the color of the title bar (using the Web Application Manifest theme_color house ), but that’s about it.

What if we could consider other ways and reclaim the whole screen in the app? Doing so would give us a chance to create our programs more wonderful and feel more included in the operating system.

The Window Controls Overlay offers precisely this. This innovative PWA operation makes it possible to take advantage of the full floor area of the app, including where the name bar usually appears.

About the subject bar and glass controls

Let’s get started with an explanation of what the window and name handles are.

The title bar is the place displayed at the top of an game windows, which frequently contains the phone’s name. The buttons or buttons that are displayed at the top of an app’s window allow you to decrease, maximize, or close it.

Window Controls Overlay removes the natural barrier of the name bar and windows controls areas. The title bar and glass control buttons are overlayed on top of the user’s web content, allowing for total height to be the game window.

If you are reading this article on a desktop computer, get a quick glance at another software. Prospects are they’re currently doing something similar to this. The best area of the page is used by the web browser you’re using to learn this, in reality.

Spotify’s application window’s top edge is where the album artwork appears.

Microsoft Word uses the available title bar space to display the auto-save and search functionalities, and more.

The whole point of this feature is to allow you to make use of this space with your own content while providing a way to account for the window control buttons. And it makes it possible to offer this modified experience on a variety of platforms without having a negative impact on the experience on browsers or other devices that don’t support Window Controls Overlay. After all, PWAs are all about progressive enhancement, so this feature is a chance to enhance your app to use this extra space when it’s available.

Let’s use the feature.

For the rest of this article, we’ll be working on a demo app to learn more about using the feature.

The demo app is called 1DIV. Users can create designs using CSS and a single HTML element in a simple CSS playground.

The app has two pages. The first lists the CSS designs you’ve already created:

The second page enables you to create and edit CSS designs:

We can install the app as a PWA on the desktop because I added a straightforward web manifest and service representative. Here is what it looks like on macOS:

And on Windows:

Our app is looking good, but the white title bar in the first page is wasted space. It would be really nice if the design area extended to the top of the app window on the second page.

Let’s use the Window Controls Overlay feature to improve this.

Enabling Window Controls Overlay

The feature is still experimental at the moment. To try it, you need to enable it in one of the supported browsers.

It has currently been incorporated into Chromium as a result of a collaboration between Microsoft and Google. We can therefore use it in Chrome or Edge by going to the internal about: //flags page, and enabling the Desktop PWA Window Controls Overlay flag.

Using the overlay of window controls

To use the feature, we need to add the following display_override member to our web app’s manifest file:

{ "name": "1DIV", "description": "1DIV is a mini CSS playground", "lang": "en-US", "start_url": "/", "theme_color": "#ffffff", "background_color": "#ffffff", "display_override": [ "window-controls-overlay" ], "icons": [ ... ]}

On the surface, the feature is really simple to use. The only thing required is for this manifest change to transform the window controls into an overlay and make the title bar disappear.

However, to provide a great experience for all users regardless of what device or browser they use, and to make the most of the title bar area in our design, we’ll need a bit of CSS and JavaScript code.

What the current state of the app is:

Our logo, search field, and NEW button are now partially covered by the window controls, but the title bar has been removed, which is what we wanted.

It’s similar on Windows, with the difference that the close, maximize, and minimize buttons appear on the right side, grouped together with the PWA control buttons:

Using CSS to keep clear of the window controls

New CSS environment variables have also been added in addition to the feature:

• titlebar-area-x
• titlebar-area-y
• titlebar-area-width
• titlebar-area-height

You use these variables with the CSS env ( ) function to position your content where the title bar would have been while ensuring it won’t overlap with the window controls. Our header, which includes the logo, search bar, and NEW button, will be placed using two of the variables in our case.

header { position: absolute; left: env(titlebar-area-x, 0); width: env(titlebar-area-width, 100%); height: var(--toolbar-height);}

The titlebar-area-x variable gives us the distance from the left of the viewport to where the title bar would appear, and titlebar-area-width is its width. (Remember, this is not equivalent to the width of the entire viewport, just the title bar portion, which as noted earlier, doesn’t include the window controls.)

By doing this, we make sure our content remains fully visible. We’re also defining fallback values (the second parameter in the env() function) for when the variables are not defined (such as on non-supporting browsers, or when the Windows Control Overlay feature is disabled).

Now our header adapts to its surroundings, and it doesn’t feel like the window control buttons have been added as an afterthought. The interface resembles a native app much more.

Changing the window controls background color so it blends in

Now let’s take a closer look at our second page: the CSS playground editor.

Not very good. Our CSS demo area does go all the way to the top, which is what we wanted, but the way the window controls appear as white rectangles on top of it is quite jarring.

We can fix this by changing the app’s theme color. There are several definitions for it:

PWAs can define a theme color in the web app manifest file using the theme_color manifest member. The OS then uses this color in various ways. On desktop platforms, it is used to provide a background color to the title bar and window controls.
• Websites can use the theme-color meta tag as well. It’s used by browsers to customize the color of the UI around the web page. For PWAs, this color can override the manifest theme_color.

In our case, we can set the manifest theme_color to white to provide the right default color for our app. The OS will read this color value when the app is installed and use it to make the window controls background color white. This color works great for our main page with the list of demos.

The theme-color meta tag can be changed at runtime, using JavaScript. So we can do that to override the white with the right demo background color when one is opened.

Here is the function we’ll employ:

function themeWindow(bgColor) { document.querySelector("meta[name=theme-color]").setAttribute('content', bgColor);}

With this in place, we can imagine how using color and CSS transitions can produce a smooth change from the list page to the demo page, and enable the window control buttons to blend in with the rest of the app’s interface.

Dragging the window

Now, getting rid of the title bar entirely does have an important accessibility consequence: it’s much more difficult to move the application window around.

Users can drag and click their way to a sizable area in the title bar, but when using the Window Controls Overlay feature, they are limited to where the control buttons are, and must carefully place their fingers in between these buttons to move the window.

Fortunately, this can be fixed using CSS with the app-region property. This property is, for now, only supported in Chromium-based browsers and needs the -webkit- vendor prefix. 

We can use the following to make any feature of the app a dragging target for the window:

-webkit-app-region: drag;

It is also possible to explicitly make an element non-draggable:

-webkit-app-region: no-drag; 

These choices might be beneficial to us. We can make the entire header a dragging target, but make the search field and NEW button within it non-draggable so they can still be used as normal.

However, because the editor page doesn’t display the header, users wouldn’t be able to drag the window while editing code. Let’s take a different approach, then. We’ll create another element before our header, also absolutely positioned, and dedicated to dragging the window.

...

.drag { position: absolute; top: 0; width: 100%; height: env(titlebar-area-height, 0); -webkit-app-region: drag;}

With the above code, we’re making the draggable area span the entire viewport width, and using the titlebar-area-height variable to make it as tall as what the title bar would have been. This way, our draggable area is aligned with the window control buttons as shown below.

And, now, to make sure our search field and button remain usable:

header .search,header .new { -webkit-app-region: no-drag;}

Users can click and drag where the title bar used to be with the above code. It is an area that users expect to be able to use to move windows on desktop, and we’re not breaking this expectation, which is good.

Adapting to window resize

It may be useful for an app to know both whether the window controls overlay is visible and when its size changes. The search field, logo, and button would need to be pushed down a little bit if the user made the window very narrow.

The Window Controls Overlay feature comes with a JavaScript API we can use to do this: navigator.windowControlsOverlay.

The API offers three intriguing features:

• navigator.windowControlsOverlay.visiblelets us know whether the overlay is visible.
• navigator.windowControlsOverlay.getBoundingClientRect()lets us know the position and size of the title bar area.
• navigator.windowControlsOverlay.ongeometrychangelets us know when something changes in size or visibility.

Let’s use this to be aware of the size of the title bar area and move the header down if it’s too narrow.

if (navigator.windowControlsOverlay) { navigator.windowControlsOverlay.addEventListener('geometrychange', () => { const { width } = navigator.windowControlsOverlay.getBoundingClientRect(); document.body.classList.toggle('narrow', width < 250); });}

In the example above, we set the narrow class on the body of the app if the title bar area is narrower than 250px. We could do something similar with a media query, but using the windowControlsOverlay API has two advantages for our use case:

• It’s only fired when the feature is supported and used, we don’t want to adapt the design otherwise.
• We can see the title bar area on different operating systems, which is great because Mac and Windows have different title bar sizes. Using a media query wouldn’t make it possible for us to know exactly how much space remains.

.narrow header { top: env(titlebar-area-height, 0); left: 0; width: 100%;}

When the window is too small, we can move the header down using the above CSS code to avoid hitting the window control buttons, and we can also lower the thumbnails accordingly.

Thirty pixels of exciting design opportunities

We were able to turn our simple demo app into something that felt so much more integrated on desktop devices by using the Window Controls Overlay feature. Something that reaches out of the usual window constraints and provides a custom experience for its users.

In reality, this feature only gives us about 30 more pixels of room, and it presents challenges for using the window controls. And yet, this extra room and those challenges can be turned into exciting design opportunities.

More devices of all shapes and forms get invented all the time, and the web keeps on evolving to adapt to them. To make it easier for us, web authors, to integrate more and more deeply with those devices, new features are added to the web platform. From watches or foldable devices to desktop computers, we need to evolve our design approach for the web. We can now think beyond the rectangular box when building for the web.

So let’s embrace this. Let’s use the standard technologies already at our disposal, and experiment with new ideas to provide tailored experiences for all devices, all from a single codebase!

If you have the chance to try the Window Controls Overlay feature and have feedback on it, you can open issues in the spec’s repository. It’s still early in the development of this feature, and you can help make it even better. Or you can look at this demo app and its source code, the feature’s existing documentation, or the feature’s existing documentation.

However, we’re still very far from this perfect.

At the time, I didn’t realize yet how to functionally combine morality. Yes, I did discover some tools in past projects that had worked for me, such as using checklists, assumption monitoring, and “dark fact” sessions, but I wasn’t able to use them in every task. I was still struggling for time and support, and at best I had only partially achieved a higher ( moral ) quality of design—which is far from my definition of structurally integrated.

I made a deeper investigation into the causes of business failure that prevent us from practicing social pattern every day. Today, after much research and experimentation, I believe that I’ve found the code that will let us functionally combine morality. And it’s unexpectedly easy! However, we must first focus out to understand what we’re going through.

Control the system

Unfortunately, we are confined to a capitalist system that fosters commercialism and inequality and is obsessed with the utopian dream of infinite growth. Sea levels, temperature, and our demand for energy continue to rise unquestioned, while the divide between rich and poor continues to increase. Owners expect ever-higher returns on their investments, and firms feel forced to set short-term goals that reflect this. Over the past few decades, those goals have transformed our well-meaning human-centered mentality into a potent tool that encourages ever-higher levels of consumption. When we’re working for an organization that pursues “double-digit growth” or “aggressive sales targets” ( which is 99 percent of us ), that’s very hard to resist while remaining human friendly. We’re a part of the problem, even with our best intentions, and we’re doing it despite our best efforts to suggest that we provide solutions for people.

What can we do to alter this?

We can begin by acting on the appropriate level of the system. System intellectual Donna H. Meadows when outlined ways to increase the effectiveness of a system. When you apply these to architecture, you get:

You can change things like usability ratings or the number of style critiques at the least effective level. But none of that may change the direction of a business.
• Similarly, affecting buffers ( such as team budgets ), stocks ( such as the number of designers ), flows ( such as the number of new hires ), and delays ( such as the time that it takes to hear about the effect of design ) won’t significantly affect a company.
• Instead of focusing on feedback loops like control power, employee reputation, or design-system investments, a company can improve its ability to achieve its goals. But that doesn’t alter the goals themselves, which means that the business will also work against your ethical-design ideals.
• The change of moral methods, toolkits, articles, conferences, workshops, and other topics are what most ethical-design initiatives are currently focusing on at the next level, details flows. This is also where social style has remained largely theoretical. We’ve been focusing on the wrong level of the system all this day.
• Take, for instance, the regulations; they consistently outwit information. There can be commonly accepted guidelines, such as how fund works, or a sprint group’s concept of done. However, illegal laws intended to maintain profits is also smother social design, which are frequently revealed through statements like” the customer didn’t ask for it” or “don’t make it very big.”
• Changing the rules without holding official energy is extremely difficult. That’s why the next stage is so significant: self-organization. Bottom-up initiatives, interest projects, self-steering teams, and research all contribute to a company’s resilience and creativity. It’s precisely this diversity of viewpoints that’s needed to functionally address major structural issues like materialism, money injustice, and climate change.
• But goals and metrics are even more powerful than self-organization. Our businesses want to make more cash, which means that everything and everyone in the business does their best to… make the company more money. And when I realized that income is nothing more than a measurement, I understood how important a very particular, defined measurement may be toward pushing a company in a particular direction.

What is the conclusion? If we truly want to incorporate ethics into our daily design practice, we must first change the measurable objectives of the company we work for, from the bottom up.

Redefine success

Traditionally, we consider a product or service successful if it’s desirable to humans, technologically feasible, and financially viable. You tend to see these represented as equals, if you type the three words in a search engine, you’ll find diagrams of three equally sized, evenly arranged circles.

However, we all know that the three dimensions are not equally important: viability is ultimately what determines whether a product will become operational. So a more realistic representation might look like this:

The means are feasibility and desire, while viability is the objective. Companies—outside of nonprofits and charities—exist to make money.

A genuinely purpose-driven company would try to reverse this dynamic: it would recognize finance for what it was intended for: a means. Therefore, both feasibility and viability are important factors in the company’s efforts to accomplish what they stated. It makes intuitive sense: to achieve most anything, you need resources, people, and money. Fun fact: the Italian language is completely unaware of the differences between feasibility and viability; both are merely fattibilità.

But simply swapping viable for desirable isn’t enough to achieve an ethical outcome. Desirability is still linked to consumerism because the associated activities aim to identify what people want—whether it’s good for them or not. When it comes to a product’s desirability goals, such as user satisfaction or conversion, don’t take into account whether it is good for people. They don’t prevent us from creating products that distract or manipulate people or stop us from contributing to society’s wealth inequality. They are unable to restore a healthy relationship with nature.

There’s a fourth dimension of success that’s missing: our designs also need to be ethical in the effect that they have on the world.

This is hardly a new idea. There are many variations of these models, some calling them “imputability, integrity, or responsibility.” What I’ve never seen before, however, is the necessary step that comes after: to influence the system as designers and to make ethical design more practical, we must create objectives for ethical design that are achievable and inspirational. There is no one way to accomplish this because it greatly depends on your country’s culture, values, and industry. But I’ll give you the version that I developed with a group of colleagues at a design agency. Consider it a template to get started.

Ensure social justice, equity, and sustainability.

We created objectives that address design’s effect on three levels: individual, societal, and global.

An individual’s goal on the individual level clarifies what success entails in contrast to the typical user-centric focus on usability and satisfaction, taking into account factors like how much time and effort are required of users. We pursued well-being:

We create products and services that allow for people’s health and happiness. Our solutions are non-misleading, transparent, and calm. We respect our users ‘ time, attention, and privacy, and help them make healthy and respectful choices.

A societal goal requires us to consider our impact beyond the mere user, widening our focus to the economy, communities, and other involuntary parties. We called this objective equity:

We create products and services that have a positive social impact. We think of racial justice, inclusiveness and diversity of people as teams, users, and customer segments as indicators of economic equality. We listen to local culture, communities, and those we affect.

Finally, the global goal of maintaining harmony with humanity’s sole home is the ultimate goal. Referring to it simply as sustainability, our definition was:

We create products and services that reward sufficiency and reusability. Our solutions promote the circular economy by generating value from waste, reusing products, and giving priority to sustainable choices. We deliver functionality instead of ownership, and we limit energy use.

In essence, ethical design ( to us ) meant achieving well-being for each user and an equitable value distribution within society through a design that can sustain our living planet. When we introduced these objectives in the company, for many colleagues, design ethics and responsible design suddenly became tangible and achievable through practical—and even familiar—actions.

Measure impact

However, defining these goals is still insufficient. What truly caught the attention of senior management was the fact that we created a way to measure every design project’s well-being, equity, and sustainability.

This overview includes some examples of metrics you can use to measure your progress toward equity, well-being, and sustainability:

There’s a lot of power in measurement. As the saying goes, what gets measured gets done. This example was once shared by Donella Meadows:

” If the desired system state is national security, and that is defined as the amount of money spent on the military, the system will produce military spending. It may or may not lead to national security.

This phenomenon explains why desirability is a poor indicator of success: it’s typically defined as the increase in customer satisfaction, session length, frequency of use, conversion rate, churn rate, download rate, and so on. But none of these metrics increase the health of people, communities, or ecosystems. What if we instead used metrics for ( digital ) well-being to measure success, such as ( reduced ) screen time or software energy consumption?

There’s another important message here. If we set an objective to create a calm interface, we might still end up with a screen that makes people anxious, even if we set the wrong metric for calmness, such as the number of interface elements. Choosing the wrong metric can completely undo good intentions.

Additionally, choosing the right metric is enormously helpful in focusing the design team. You are forced to consider what success looks like in real life and how you can demonstrate that you have met your ethical goals once you have chosen the metrics to use. It also forces you to consider what we as designers have control over: what can I include in my design or change in my process that will lead to the right type of success? The response to this query provides a lot of insight and clarity.

And finally, it’s good to remember that traditional businesses run on measurements, and managers love to spend much time discussing charts ( ideally hockey-stick shaped ) —especially if they concern profit, the one-above-all of metrics. For good or ill, to improve the system, to have a serious discussion about ethical design with managers, we’ll need to speak that business language.

Practice daily ethical design

Once you’ve defined your objectives and you have a reasonable idea of the potential metrics for your design project, only then do you have a chance to structurally practice ethical design. Making the decision to” simply” use your imagination and pick one of the many resources and knowledge resources at your disposal.

I think this is quite exciting! It opens a whole new set of challenges and considerations for the design process. Would a simple illustration suffice, or should you go with that energizing video? Which typeface is the most calm and inclusive? What brand-new equipment and techniques do you employ? When is the website’s end of life? How can you provide the same service while requiring less attention from users? How can you ensure that those who are affected by decisions are present when they are made? How can you measure our effects?

What doing good design means will be completely altered by the new definition of success.

There is, however, a final piece of the puzzle that’s missing: convincing your client, product owner, or manager to be mindful of well-being, equity, and sustainability. For this, it’s essential to engage stakeholders in a dedicated kickoff session.

Start it off or return to the pre-existing

The kickoff is the most important meeting that can be so easy to forget to include. It consists of two main steps: 1 ) the alignment of expectations and 2 ) the definition of success.

In the first phase, the entire ( design ) team goes over the project brief and meets with all the relevant stakeholders. Everyone gets to know one another and express their expectations on the outcome and their contributions to achieving it. Discussion and assumptions are raised. The aim is to get on the same level of understanding and to in turn avoid preventable miscommunications and surprises later in the project.

For instance, we conducted an online kickoff with the client, a subject-matter expert, and two other designers for a recent freelance project that aimed to design a digital platform that facilitates US student advisors ‘ documentation and communication. We used a combination of canvases on Miro: one with questions from” Manual of Me” ( to get to know each other ), a Team Canvas ( to express expectations ), and a version of the Project Canvas to align on scope, timeline, and other practical matters.

The above is the traditional purpose of a kickoff. However, agreeing on the project’s success means having respect for its desirability, viability, feasibility, and ethics is just as crucial as expressing expectations. What are the objectives in each dimension?

It’s crucial to reach an understanding of what success means at this early stage because you can depend on it for the duration of the project. If, for example, the design team wants to build an inclusive app for a diverse user group, they can raise diversity as a specific success criterion during the kickoff. If the client agrees, the team can refer back to that promise throughout the project. As we agreed in our first meeting, having A and B’s diverse user group is essential to creating a successful product. So we do activity X and follow research process Y”. Compare those odds to a scenario where the team had to request permission halfway through the project and didn’t agree to it in advance. The client might argue that that came on top of the agreed scope—and she’d be right.

In the case of this freelance project, to define success I prepared a round canvas that I call the Wheel of Success. An inner ring with the intention of capturing ideas for objectives and an outer ring with the intention of capturing ideas for measuring those objectives are included. The rings are divided into five dimensions of successful design: healthy, equitable, sustainable, desirable, feasible, and viable.

We recorded ideas on digital sticky notes as we traversed each dimension. Then we discussed our ideas and verbally agreed on the most important ones. For example, our client agreed that sustainability and progressive enhancement are important success criteria for the platform. Additionally, the subject-matter expert stressed the value of involving students from underprivileged and low-income groups in the design process.

After the kickoff, we summarized our ideas and shared understanding in a project brief that captured these aspects:

the project’s history and purpose: What is the purpose of this project?
• the problem definition: what do we want to solve?
• the concrete goals and metrics for each success dimension: what do we want to achieve?
• how will we go about defining the scope, procedure, and role descriptions?

With such a brief in place, you can use the agreed-upon objectives and concrete metrics as a checklist of success, and your design team will be ready to pursue the right objective—using the tools, methods, and metrics at their disposal to achieve ethical outcomes.

Conclusion

A number of my coworkers have questioned me over the past year,” Where do I begin with ethical design?” My answer has always been the same: organize a session with your stakeholders to ( re ) define success. Even though you might not always be 100 percent successful in agreeing on goals that cover all responsibility objectives, that beats the alternative ( the status quo ) every time. There’s no skipping this step if you want to be an ethical, responsible designer.

To be even more specific: if you consider yourself a strategic designer, your challenge is to define ethical objectives, set the right metrics, and conduct those kick-off sessions. If you think of yourself as a system designer, you need to first understand how your industry influences consumerism and inequality, how finance drives business, and how to think creatively about how to best influence the system. Then redefine success to create the space to exercise those levers.

And for those who consider themselves service designers or UX designers or UI designers: if you truly want to have a positive, meaningful impact, stay away from the toolkits and meetups and conferences for a while. Gather your coworkers to set design goals for sustainability, well-being, and equity. Engage your stakeholders in a workshop and challenge them to think of ways to achieve and measure those ethical goals. Give them their opinions, clarify them, and demand their consent.

Otherwise, I’m genuinely sorry to say, you’re wasting your precious time and creative energy.

Of course, engaging your stakeholders in this way can be uncomfortable. Many of my coworkers had questions to ask, such as” Will they take this seriously”?,” Will they take it seriously?” and “Can’t we just do it within the design team instead”? In fact, a product manager once asked me why ethics couldn’t just be a structured part of the design process—to just do it without spending the effort to define ethical objectives. It’s a tempting thought, isn’t it? We wouldn’t have to have difficult discussions with stakeholders about what values or which key-performance indicators to pursue. It would let us focus on what we like and do best: designing.

That’s not enough, as systems theory suggests, though. For those of us who aren’t from marginalized groups and have the privilege to be able to speak up and be heard, that uncomfortable space is exactly where we need to be if we truly want to make a difference. We can’t continue to live in the design-for-designers bubble and enjoy our privileged working-from-home environment without access to the real world. For those of us who have the possibility to speak up and be heard: if we solely keep talking about ethical design and it remains at the level of articles and toolkits—we’re not designing ethically. It’s just theory. By challenging them to redefine success in business, we must actively engage with our coworkers and clients.

With a bit of courage, determination, and focus, we can break out of this cage that finance and business-as-usual have built around us and become facilitators of a new type of business that can see beyond financial value. We simply need to come to terms with the right goals when starting each design project, identify the appropriate metrics, and acknowledge that we already have everything in place. That’s what it means to do daily ethical design.

For their inspiration and support over the years, I would like to thank Emanuela Cozzi Schettini, José Gallegos, Annegret Bönemann, Ian Dorr, Vera Rademaker, Virginia Rispoli, Cecilia Scolaro, Rouzbeh Amini, and many others.

The mobile-first design approach is excellent because it concentrates on what the customer truly needs, is well-practiced, and has become a standard design practice for years. But developing your CSS mobile-first should also be wonderful, too…right?

Well, not necessarily. Classic mobile-first CSS development is based on the principle of overwriting style declarations: you begin your CSS with default style declarations, and overwrite and/or add new styles as you add breakpoints with min-width media queries for larger viewports (for a good overview see “What is Mobile First CSS and Why Does It Rock?”). But all those exceptions create complexity and inefficiency, which in turn can lead to an increased testing effort and a code base that’s harder to maintain. Admit it—how many of us willingly want that?

Mobile-first CSS may yet be the best option for your own projects, but you need to first determine whether it is appropriate in light of the physical design and user relationships you’re creating. To help you get started, here’s how I go about tackling the elements you need to watch for, and I’ll discuss some alternative remedies if mobile-first doesn’t seem to fit your job.

merits of mobile-first technology

Some of the benefits of mobile-first CSS creation, and why it’s been the de facto growth strategy for so long, make a lot of sense:

Development pyramid. A good development hierarchy is something you can definitely expect from mobile-first; you simply concentrate on the mobile view and start developing.

tested and verified. It’s a tried and tested technique that’s worked for years for a cause: it solves a problem actually also.

prioritizes the smart see. The smart see is the simplest and perhaps the most crucial because it covers all of the crucial consumer journeys and frequently accounts for more user visits ( depending on the project ) in terms of both simple and crucial aspects.

Stops desktop-centric growth. It can be tempting to first focus on the desktop perspective because enhancement is done using pc servers. No one wants to spend their time retrofitting a desktop-centric website to function on mobile devices, but thinking about smart right away keeps us from getting stuck later on!

Drawbacks of mobile-first

Kind declarations can be set at higher breakpoints and therefore overwritten at higher breakpoints:

more complicated stuff. The farther up the target order you go, the more unnecessary script you inherit from lower thresholds.

higher CSS sensitivity A school name declaration with a turned default value for a style has a higher specificity today. This can be a pain on big projects when you want to preserve the CSS candidates as simple as possible.

Requires more analysis tests. All higher thresholds must be regression tested if modifications to CSS at a lower watch ( such as adding a new style ) are to be made.

The browser can’t prioritize CSS downloads. At wider breakpoints, classic mobile-first min-width media queries don’t leverage the browser’s capability to download CSS files in priority order.

Home price issue is overruled by the issue.

There is nothing intrinsically wrong with overwriting principles, CSS was designed to do just that. Even so, inheriting wrong values may be laborious and ineffective. When you have to replace styles to restore them back to their defaults, which may cause issues after, especially if you are using a combination of bespoke CSS and power classes, it can also lead to more fashion precision. We won’t be able to use a power school for a design that has been restore with a higher precision.

With this in mind, I’m developing CSS with a focus on the default values much more these days. Since there’s no specific order, and no chains of specific values to keep track of, this frees me to develop breakpoints simultaneously. I concentrate on finding common styles and isolating the specific exceptions in closed media query ranges (that is, any range with a max-width set). 

As you can view each target as a blank slate, this strategy opens up some opportunities. If a product’s layout appears to be based on Flexbox at all thresholds, that is acceptable and can be coded in the definition style sheet. But if it looks like Grid would be much better for large windows and Flexbox for portable, these can both be done entirely freely when the CSS is put into finished media keyword ranges. Additionally, having a thorough understanding of any given component in all breakpoints upfront is necessary for developing simultaneously. This can help identify issues in the design more quickly during the development process. We don’t want to get stuck down a rabbit hole building a complex component for mobile, and then get the designs for desktop and find they are equally complex and incompatible with the HTML we created for the mobile view!

Although this strategy won’t work for everyone, I urge you to try it. There are plenty of resources available to support concurrent development, including Responsively App, Blisk, and many others.

Having said that, I don’t feel the order itself is particularly relevant. If you like to work on one device at a time, are comfortable with focusing on the mobile view, and are familiar with the requirements for other breakpoints, then you should definitely follow the classic development order. It’s crucial to find common styles and exceptions in the appropriate stylesheet, which is a manual tree-shaking procedure! Personally, I find this a little easier when working on a component across breakpoints, but that’s by no means a requirement.

Closed media query ranges are used in real life

We overwrite the styles in the classic mobile-first CSS, but we can prevent this by using media query ranges. To illustrate the difference ( I’m using SCSS for brevity ), let’s assume there are three visual designs:

• smaller than 768
• from 768 to less than 1024
• 1024 and anything larger

Take a simple example where a block-level element has a default padding of “20px,” which is overwritten at tablet to be “40px” and set back to “20px” on desktop.

.my-block { padding: 20px; @media (min-width: 768px) { padding: 40px; } @media (min-width: 1024px) { padding: 20px; }}

.my-block { padding: 20px; @media (min-width: 768px) and (max-width: 1023.98px) { padding: 40px; }}

The subtle difference is that the mobile-first example sets the default padding to “20px” and then overwrites it at each breakpoint, setting it three times in total. In contrast, the second example sets the default padding to “20px” and only overrides it at the relevant breakpoint where it isn’t the default value (in this instance, tablet is the exception).

The goal is to: 

• Only set styles when needed. 
• Not set them with the expectation of overwriting them later on, again and again. 

To this end, closed media query ranges are our best friend. If we need to make a change to any given view, we make it in the CSS media query range that applies to the specific breakpoint. We’ll be much less likely to introduce unwanted alterations, and our regression testing only needs to focus on the breakpoint we have actually edited. 

Taking the above example, if we find that .my-block spacing on desktop is already accounted for by the margin at that breakpoint, and since we want to remove the padding altogether, we could do this by setting the mobile padding in a closed media query range.

.my-block {  @media (max-width: 767.98px) {    padding: 20px;  }  @media (min-width: 768px) and (max-width: 1023.98px) {    padding: 40px;  }}

The browser default padding for our block is “0,” so instead of adding a desktop media query and using unset or “0” for the padding value (which we would need with mobile-first), we can wrap the mobile padding in a closed media query (since it is now also an exception) so it won’t get picked up at wider breakpoints. At the desktop breakpoint, we won’t need to set any padding style, as we want the browser default value.

Bundling versus separating the CSS

Back in the day, keeping the number of requests to a minimum was very important because the browser's concurrent requests limit (typically around six ) was high. In consequence, using image sprites and CSS bundling was the norm, with all the CSS being downloaded as a single stylesheet with the highest priority.

With HTTP/2 and HTTP/3 now on the scene, the number of requests is no longer the big deal it used to be. By using a media query, we can break CSS into several files. The obvious benefit of this is that the browser can now request the CSS it currently requires with a higher priority than the CSS it doesn't. This is more performant and can reduce the overall time page rendering is blocked.

What version of HTTP do you use?

Go to your website and open your browser's dev tools to find out which version of HTTP you're using. Next, select the Network tab and make sure the Protocol column is visible. If "h2" is included in the protocol list, that indicates that HTTP/2 is being used.

Note: To check the Protocol column in your browser's dev tools, right-click any column header ( such as Name ), go to the Network tab, reload your page, and then check the Protocol column.

If your website still uses HTTP/1, please check it out. WHHY!! What are you waiting for? Excellent user support exists for HTTP/2.

splitting the CSS

Separating the CSS into individual files is a worthwhile task. Linking the separate CSS files using the relevant media attribute allows the browser to identify which files are needed immediately (because they’re render-blocking) and which can be deferred. Based on this, it allocates each file an appropriate priority.

In the following example of a website visited on a mobile breakpoint, we can see the mobile and default CSS are loaded with" Highest" priority, as they are currently needed to render the page. In case they are needed later, the remaining CSS files ( print, tablet, and desktop ) are still being downloaded with" Lowest" priority, though they are still needed.

Before rendering can begin, the browser will need to download and parse the CSS file when using bundled CSS.

While, as noted, with the CSS separated into different files linked and marked up with the relevant media attribute, the browser can prioritize the files it currently needs. Using closed media query ranges allows the browser to do this at all widths, as opposed to classic mobile-first min-width queries, where the desktop browser would have to download all the CSS with Highest priority. We can’t assume that desktop users always have a fast connection. For instance, in many rural areas, internet connection speeds are still slow. 

Depending on project requirements, the media queries and the number of separate CSS files will vary from project to project, but the example below might look similar.

Depending on the project’s deployment strategy, a change to one file (mobile.css, for example) would only require the QA team to regression test on devices in that specific media query range. Compare that to the prospect of deploying the single bundled site.css file, an approach that would normally trigger a full regression test.

Moving on

The adoption of mobile-first CSS was a significant milestone in web development because it allowed front-end developers to concentrate on mobile web applications rather than creating websites for desktop use and attempting to retrofit them to work on other devices.

I don't think anyone wants to return to that development model again, but it's important we don't lose sight of the issue it highlighted: that things can easily get convoluted and less efficient if we prioritize one particular device—any device—over others. For this reason, it seems natural to concentrate on the CSS in its own right, always mindful of what is the default setting and what constitutes an exception, as a result. I've started to notice subtle simplifications in both the CSS and other developers', and that the work is also a little more organized and effective.

In general, simplifying CSS rule creation whenever we can is ultimately a cleaner approach than going around in circles of overrides. However, the project must fit the methodology you choose. For the reasons given, mobile-first may turn out to be the best option for the situation, but first you must fully comprehend the trade-offs you're entering.

In today’s data-driven environment, it’s becoming more and more possible for you to be asked to create a personal digital expertise, whether it’s a common website, consumer portal, or local application. But while there continues to be no lack of marketing buzz around personalization systems, we also have very few defined approaches for implementing personalized UX.

That’s where we come in. After completing tens of personalisation projects over the past few years, we gave ourselves a purpose: could you make a systematic personalization platform especially for UX practitioners? A human-centered personalization program can be established using the Personalization Pyramid, which covers files, classification, content delivery, and overall objectives. By using this strategy, you will be able to understand the core elements of a modern, UX-driven personalization system ( or at the very least understand enough to get started ).

Getting Started

We’ll assume that you are already comfortable with the fundamentals of modern personalization for the purposes of this article. A nice guide can be found these: Website Personalization Planning. Although Graphic projects in this field can take a variety of forms, they frequently start from the same place.

Common scenarios for starting a personalisation task:

• Your business or client made a purchase to personalize their content management system ( CMS ), marketing automation platform ( MAP ), or other related technology.
• The CMO, CDO, or CIO has identified personalisation as a target
• Consumer data is unclear or disjointed.
• You are running some secluded targeting strategies or A/B tests
• On the personalisation method, stakeholders disagree.
• Mandate of customer privacy rules ( e. g. GDPR ) requires revisiting existing user targeting practices

Regardless of where you begin, a powerful personalization system will require the same key building stones. These are the “levels” on the tower, which we have identified. Whether you are a UX artist, scholar, or planner, understanding the core components may help make your contribution effective.

From top to bottom, the amounts include:

North Star: What larger corporate goal is driving the personalization system?
1. Objectives: What are the specific, tangible benefits of the system?
2. Touchpoints: Where will you get a personal experience?
3. Contexts and Campaigns: What personalization information does the person view?
4. What constitutes a distinct, accessible market according to consumer parts?
5. Actionable information: What dependable and credible information is captured by our professional platform to generate personalization?
6. What wider set of data is conceivable ( now in our environment ) to allow you to optimize?

We’ll go through each of these amounts in change. To make this more bearable, we created a deck of cards that accompany it to show specific instances from each stage. We’ve found them helpful in customisation brainstorming periods, and will include cases for you here.

Starting at the Top

The elements of the pyramids are as follows:

North Star

Ultimately, you want a North Star in your personalization program, whether big or small. The North Star defines the (one ) overall mission of the personalization program. What do you hope to accomplish? North Stars cast a ghost. The darkness is bigger the sun the bigger the sun. Example of North Starts may incorporate:

Function: Optimize based on fundamental consumer inputs. Examples:” Raw” messages, basic search effects, system user settings and settings options, general flexibility, basic improvements
1. Feature: Self-contained customisation component. Examples:” Cooked” notifications, advanced optimizations ( geolocation ), basic dynamic messaging, customized modules, automations, recommenders
2. Experience: Individualized person experiences across a range of consumer flows and interactions. Examples: Email campaigns, landing pages, advanced messaging ( i. e. C2C chat ) or conversational interfaces, larger user flows and content-intensive optimizations ( localization ).
3. Solution: Highly distinctive, personalized solution experiences. Example: Standalone, branded experience with personalization at their base, like the “algotorial” songs by Spotify quite as Discover Weekly.

Goals

Personalization can aid in accelerating designing with user intentions, as in any great UX design. Goals are the military and quantifiable metrics that may prove the entire program is effective. Start with your existing analytics and calculation system, as well as indicators you can benchmark against. In some cases, new targets may be ideal. The most important thing to keep in mind is that personalisation is not a desired outcome. Popular targets include:

• Conversion
• Time spent on work
• Net promoter score ( NPS)
• pleasure of the client

Touchpoints

Touchpoints are where the personalisation happens. This will be one of your biggest areas of responsibility as a UX artist. The connections available to you will depend on how your personalization and associated technologies capabilities are instrumented, and should be rooted in improving a person’s experience at a certain point in the trip. Touchpoints can be multi-device ( mobile, in-store, website ), but they can also be more specific ( web banner, web pop-up, etc. ). Here are a few illustrations:

Channel-level touchpoints

• Email: Role
• Email opens at what time?
• In-store display ( JSON endpoint )
• Native app
• Search

Wireframe-level Touchpoints

• Web overlay
• Web alert bar
• Web banner
• Web content block
• menu on the web

If you’re designing for web interfaces, for example, you will likely need to include personalized “zones” in your wireframes. Based on our next step, context, and campaigns, the content for these can be presented programmatically in touchpoints.

Contexts and Campaigns

Once you’ve identified some touchpoints, you can decide what kind of personalized content a user will receive. Many personalization tools will refer to these as” campaigns” ( so, for example, a campaign on a web banner for new visitors to the website ). These will be displayed programmatically to specific user segments at specific touchpoints, as defined by user data. At this stage, we find it helpful to consider two separate models: a context model and a content model. The context helps you consider the level of user engagement at the personalization moment, for instance, if they are just casually browsing information rather than engaging in a deep dive. Think of it in terms of information retrieval behaviors. The content model can then guide you in deciding what kind of personalization to use in the context ( for instance, an” Enrich” campaign that features related articles might be a good substitute for extant content ).

Personalization Context Model:

1. Browse
2. Skim
3. Nudge
4. Feast

Content model for personalization

1. Alert
2. Make Easier
3. Cross-Sell
4. Enrich

If you’d like to read more about each of these models, check out Colin’s Personalization Content Model and Jeff’s Personalization Context Model.

User Groups

User segments can be created prescriptively or adaptively, based on user research ( e. g. via rules and logic tied to set user behaviors or via A/B testing ). You will need to think about how to treat the logged-in visitor, the guest or returning visitor for whom you may have a stateful cookie ( or another post-cookie identifier ), or the authenticated visitor who is logged in at the very least. Here are some examples from the personalization pyramid:

• Unknown
• Guest
• Authenticated
• Default
• Referred
• Role
• Cohort
• Unique ID

Actionable information

Every organization with any digital presence has data. It’s important to inquire about how to use the data you can ethically collect on users, its inherent reliability and value, and what is the term for “data activation.” Fortunately, the tide is turning to first-party data: a recent study by Twilio estimates some 80 % of businesses are using at least some type of first-party data to personalize the customer experience.

First-party data has a number of benefits on the user experience front, including being relatively simple to collect, more likely to be accurate, and less susceptible to the” creep factor” of third-party data. So a key part of your UX strategy should be to determine what the best form of data collection is on your audiences. Here are a few illustrations:

There is a progression of profiling when it comes to recognizing and making decisioning about different audiences and their signals. As user data volume and time and confidence increase, it varies more granularly to more precise constructs about ever-smaller cohorts of users.

While some combination of implicit / explicit data is generally a prerequisite for any implementation ( more commonly referred to as first party and third-party data ) ML efforts are typically not cost-effective directly out of the box. This is because optimization requires a strong content repository and data backbone. But these approaches should be considered as part of the larger roadmap and may indeed help accelerate the organization’s overall progress. At this point, you will typically work with important stakeholders and product owners to create a profiling model. The profiling model includes defining approach to configuring profiles, profile keys, profile cards and pattern cards. a scalable, multi-faceted approach to profiling.

Pulling it Together

The cards serve as the foundation for an inventory of sorts ( we provide blanks for you to tailor your own ), a set of potential levers and motivations for the kind of personalization activities you aspire to deliver, but they are more valuable when grouped together.

In assembling a card “hand”, one can begin to trace the entire trajectory from leadership focus down through a strategic and tactical execution. It is also at the heart of the way that both co-authors have organized workshops to build a backlog of programs, which would make a good subject for a separate article.

In the meantime, what is important to note is that each colored class of card is helpful to survey in understanding the range of choices potentially at your disposal, it is threading through and making concrete decisions about for whom this decisioning will be made: where, when, and how.

Lay Down Your Cards

Any effective personalization plan must take into account near, middle, and long-term objectives. Even with the leading CMS platforms like Sitecore and Adobe or the most exciting composable CMS DXP out there, there is simply no “easy button” wherein a personalization program can be stood up and immediately view meaningful results. Having said that, all personalization activities follow the same grammatical convention, just like every sentence contains both nouns and verbs. These cards attempt to map that territory.

Humility, a writer’s most important quality, has a great circle to it. What about sincerity, an business manager’s necessary value? Or a surgeon’s? Or a teacher’s? They all have excellent sounding voices. When humility is our guiding light, the course is usually available for fulfillment, development, relation, and commitment. We’re going to speak about why in this section.

That said, this is a guide for developers, and to that conclusion, I’d like to begin with a story—well, a voyage, actually. It’s a personal one, and I’m going to make myself susceptible as well. I call it:

The Absurd Pate of Justin: A Tale

When I was coming out of arts school, a long-haired, goateed novice, write was a known quantity to me, design on the web, however, was riddled with complexities to understand and learn, a problem to be solved. Although I had formal training in typography, layout, and creative design, what most intrigued me was how these traditional skills could be applied to a young modern landscape. This style would eventually form the rest of my profession.

So I devoured HTML and JavaScript novels into the wee hours of the morning and self-taught myself how to code during my freshman year rather than student and go into print like many of my companions. I wanted—nay, needed—to better understand the underlying relevance of what my design decisions may think when rendered in a website.

The so-called” Wild West” of website design existed in the late 1990s and the early 2000s. Manufacturers at the time were all figuring out how to use layout and visual connection to the online environment. What regulations were in place? How may we break them and also engage, entertain, and present information? How was my values, which include sincerity, respect, and connection, coincide with that on a more general level? I was eager to find out.

Those are amazing factors between non-career relationships and the world of style, even though I’m referring to a different era. What are your main passions, or ideals, that elevate medium? The main themes are the same, basically the same as what we previously discussed on the primary parallels between what fulfills you, independent of the physical or digital realms.

First within tables, animated GIFs, Flash, then with Web Standards, divs, and CSS, there was personality, raw unbridled creativity, and unique means of presentment that often defied any semblance of a visible grid. Splash screens and “browser requirement” pages aplenty. Usability and accessibility were typically victims of such a creation, but such paramount facets of any digital design were largely (and, in hindsight, unfairly) disregarded at the expense of experimentation.

For instance, this iteration of my personal portfolio site (” the pseudoroom” ) from that time was experimental if not a little overt in terms of the visual presentation of the idea of a living sketchbook. Quite skeuomorphic. On this one, we would first picture and then slip a Photoshop record back and forth to trap things up and play with various customer interactions. I co-founded the creative task organizing app Milanote and my dear friend, fellow designer Marc Clancy. Finally, I’d break it down and protocol it into a modern layout.

Along with pattern book pieces, the site even offered free downloads for Mac OS customizations: pc wallpapers that were successfully design experimentation, custom-designed typefaces, and desktop icons.

GUI Galaxy was a design, pixel art, and Mac-centric news portal that graphic designer friends and I developed from around the same time.

Design news portals were incredibly popular at the time, and they now accept tweet-sized, small-format excerpts from relevant news from the categories I previously covered. If you took Twitter, curated it to a few categories, and wrapped it in a custom-branded experience, you’d have a design news portal from the late 90s / early 2000s.

We as designers had changed and developed a bandwidth-sensitive, award-winning, much more accessibility-conscious website. Still ripe with experimentation, yet more mindful of equitable engagement. There are a few content panes here, with both Mac-focused news and general news (tech, design ) to be seen. We also offered many of the custom downloads I cited before as present on my folio site but branded and themed to GUI Galaxy.

The presentation layer, which included global design, illustration, and news author collaboration, was the backbone of the website. And the collaboration effort here, in addition to experimentation on a’ brand’ and content delivery, was hitting my core. We were creating a global audience by creating something bigger than just one of us.

Collaboration and connection transcend medium in their impact, immensely fulfilling me as a designer.

Why am I taking you on this journey of design memory lane, now? Two reasons.

First, there’s a reason for the nostalgia for that design era ( the” Wild West” era, as I put it ): the inherent exploration, personality, and creativity that dominated many design portals and personal portfolio websites. Ultra-finely detailed pixel art UI, custom illustration, bespoke vector graphics, all underpinned by a strong design community.

The web design industry has experienced stagnation in recent years. I suspect there’s a strong chance you’ve seen a site whose structure looks something like this: a hero image / banner with text overlaid, perhaps with a lovely rotating carousel of images ( laying the snark on heavy there ), a call to action, and three columns of sub-content directly beneath. Perhaps there are selections that vaguely relate to their respective content in an icon library.

Design, as it’s applied to the digital landscape, is in dire need of thoughtful layout, typography, and visual engagement that goes hand-in-hand with all the modern considerations we now know are paramount: usability. accessibility. Load times and bandwidth- sensitive content delivery. A user-friendly presentation that connects with people wherever they are. We must be mindful of, and respectful toward, those concerns—but not at the expense of creativity of visual communication or via replicating cookie-cutter layouts.

Pixel Issues

Websites during this period were often designed and built on Macs whose OS and desktops looked something like this. Although Mac OS 7.5 is available, 8 and 9 are not very different.

How could any single icon, at any given moment, stand out and grab my attention? That is a fascinating question. In this example, the user’s desktop is tidy, but think of a more realistic example with icon pandemonium. How did it maintain cohesion among the group, for example, if an icon was a part of a larger system grouping ( fonts, extensions, control panels )?

These were 32 x 32 pixel creations, utilizing a 256-color palette, designed pixel-by-pixel as mini mosaics. This, in my opinion, was the embodiment of digital visual communication under such absurd constraints. And often, ridiculous restrictions can yield the purification of concept and theme.

So I started doing my homework and conducting my research. I was a student of this new medium, hungry to dissect, process, discover, and make it my own.

I wanted to see how I could push the boundaries of a 32×32 pixel grid with that 256-color palette, expanding upon the idea of exploration. Those ridiculous constraints forced a clarity of concept and presentation that I found incredibly appealing. I was thrown the digital gauntlet, and that challenge fueled my determination. And so, in my dorm room into the wee hours of the morning, I toiled away, bringing conceptual sketches into mini mosaic fruition.

These are some of my creations that I made using ResEdit, the only program I had at the time, to create icons. ResEdit was a clunky, built-in Mac OS utility not really made for exactly what we were using it for. Research is at the center of all of this work. Challenge. solving problems. Again, these core connection-based values are agnostic of medium.

There’s one more design portal I want to talk about, which also serves as the second reason for my story to bring this all together.

This is the Kaliber 1000, or K10k, short for. K10k was founded in 1998 by Michael Schmidt and Toke Nygaard, and was the design news portal on the web during this period. It was the place to be, my friend, with its pixel art-fueled presentation, ultra-focused care given to every aspect of every detail, and many of the more influential designers of the time who were invited to be news authors on the site. With respect where respect is due, GUI Galaxy’s concept was inspired by what these folks were doing.

For my part, the combination of my web design work and pixel art exploration began to get me some notoriety in the design scene. K10k eventually added me as one of their very select group of news writers to the website’s content.

Amongst my personal work and side projects —and now with this inclusion—in the design community, this put me on the map. Additionally, my design work has started to appear on other design news portals, as well as be published in various printed collections, in domestic and international magazines, and in various printed collections. With that degree of success while in my early twenties, something else happened:

I actually changed into a colossal asshole in about a year of school, not less. The press and the praise became what fulfilled me, and they went straight to my head. They inflated my ego. I actually felt somewhat superior to my fellow designers.

The casualties? My design stagnated. My evolution has stagnated, as is its evolution.

I felt so supremely confident in my abilities that I effectively stopped researching and discovering. When my first instinct was to sketch concepts or iterate ideas in lead, I instead leaped right into Photoshop. I drew my inspiration from the smallest of sources ( and with blinders on ). Any criticism of my work from my fellow students was frequently vehemently dissented. The most tragic loss: I had lost touch with my values.

My ego almost destroyed some of my friendships and blossoming professional relationships. I was toxic in talking about design and in collaboration. But thankfully, those same friends gave me a priceless gift: candor. They called me out on my unhealthy behavior.

It was a gift I initially did not accept but which I, on the whole, was able to reflect on in depth. I was soon able to accept, and process, and course correct. Although the realization made me feel uneasy, the re-awakening was necessary. I let go of the “reward” of adulation and re-centered upon what stoked the fire for me in art school. Most importantly, I returned to my fundamental values.

Always Students

Following that temporary regression, I was able to advance in both my personal and professional design. And I could self-reflect as I got older to facilitate further growth and course correction as needed.

Let’s use the Large Hadron Collider as an example. The LHC was designed” to help answer some of the fundamental open questions in physics, which concern the basic laws governing the interactions and forces among the elementary objects, the deep structure of space and time, and in particular the interrelation between quantum mechanics and general relativity”. Thank you, Wikipedia.

Around fifteen years ago, in one of my earlier professional roles, I designed the interface for the application that generated the LHC’s particle collision diagrams. These diagrams are the depiction of what is actually happening inside the Collider during any given particle collision event and are frequently regarded as works of art by themselves.

Designing the interface for this application was a fascinating process for me, in that I worked with Fermilab physicists to understand what the application was trying to achieve, but also how the physicists themselves would be using it. In order to accomplish this, in this role,

I cut my teeth on usability testing, working with the Fermilab team to iterate and improve the interface. To me, their language and the topics they discussed seemed foreign. And by making myself humble and working under the mindset that I was but a student, I made myself available to be a part of their world to generate that vital connection.

I also had my first ethnographic observational experience, which involved visiting the Fermilab location and observing how the physicists used the tool in their own environments, on their own terminals. For example, one takeaway was that due to the level of ambient light-driven contrast within the facility, the data columns ended up using white text on a dark gray background instead of black text-on-white. They could read through a lot of data at once and relieve their strain in the process. And Fermilab and CERN are government entities with rigorous accessibility standards, so my knowledge in that realm also grew. Another crucial form of communication was the barrier-free design.

So to those core drivers of my visual problem-solving soul and ultimate fulfillment: discovery, exposure to new media, observation, human connection, and evolution. Before I entered those values, I had to check my ego before entering it, which opened the door to those values.

An evergreen willingness to listen, learn, understand, grow, evolve, and connect yields our best work. I want to pay attention to the words “grow” and “evolve” in particular in that statement. If we are always students of our craft, we are also continually making ourselves available to evolve. Yes, we have completed years of design research. Or the focused lab sessions from a UX bootcamp. Or the monogrammed portfolio of our creative work. Or, ultimately, decades of a career behind us.

However, remember that “experience” does not equate to “expert.”

As soon as we close our minds via an inner monologue of’ knowing it all’ or branding ourselves a” #thoughtleader” on social media, the designer we are is our final form. There will never be a designer like us.

I have a creative side. What I do involves chemistry. It’s a puzzle. I prefer to let it be done through me rather than through me.

I am imaginative. No all creative people approve of this brand. Not everyone see themselves in this manner. Some innovative individuals incorporate technology into their work. That is the way they are, and I take that into account. Perhaps I also have a little bit of fear for them. However, my staying and approach are different.

Apologizing and qualifying in advance is a diversion. My head uses that to destroy me. I’ll leave it alone for today. I may come back later to make amends and define. After I’ve said what I originally said. which is sufficient.

Except when it flows like a beverage valley and is simple.

Sometimes it does go that approach. Maybe what I need to make arrives in a flash. When I say something at that time, I’ve learned not to say it because people often don’t work hard enough to acknowledge that the idea is the best idea even when you know it’s the best idea.

Sometimes I just work until the plan strikes me. It occasionally arrives right away, but I don’t remind people for three weeks. Maybe I get so excited about something that just happened that I blurt it out and didn’t stop myself. like a child who discovered a medal in one of his Cracker Jacks. I occasionally manage to get away with this. Yes, that is the best plan, per some observers. The majority of the time, they don’t, and I regret that joy has faded.

Passion should be saved for the meeting, where it will matter. not the informal gathering that two different gatherings precede that appointment. Nobody understands why these discussions occur. We keep saying we’re getting rid of them, but we keep discovering new ways to get them. They occasionally also excel. Sometimes they detract from the real work, though. Depending on what you do and where you do it, the ratio between when conferences are valuable and when they are a sad distraction vary. And who you are and how you go about doing it. I’ll go back and forth once more. I have a creative side. That is the design.

Often, a lot of hours of diligent and diligent work ends up with something that is barely useful. Often I have to accept that and move on to the next task.

Don’t inquire about the procedure. I have a creative side.

I am imaginative. I have no control over my desires. And I have no control over my best tips.

I may hammer apart and often find it useful to surround myself with images or information. I can go for a move, which occasionally works. There is a Eureka that has nothing to do with sizzling crude and flowing pots. I may be making dinner. I frequently have a plan for action when I wake up. The idea that may have saved me disappears almost as frequently as I become aware and part of the world once more in a mindless breeze of oblivion. For inventiveness, in my opinion, originates in that other world. The one that we enter in goals, and possibly before and after death. I’m not a writer, so that’s up to writers to think about. I have a creative side. And it’s for philosophers to build massive soldiers in their imaginative world that they claim to be true. That is yet another diversion, though. And a sad one. Whether or not I am innovative or not, this may be on a much larger issue. But that’s also a step backwards from what I’m trying to say.

Often the outcome is evasion. And suffering. You are familiar with the adage” the tortured musician”? Even when the artist attempts to create a soft drink song, a callback in a worn-out sitcom, or a budget request, that noun is accurate.

Some individuals who detest the idea of being called artistic perhaps been closeted artists, but that’s between them and their gods. No offence here, that’s meant. Your reality is also true. My needs are own, though.

Designers acknowledge their work.

Disadvantages are aware of cons, just like queers are aware of queers, just like real rappers are aware of genuine rappers are aware of cons. People have a lot of regard for artists. We respect, follow, and nearly deify the excellent ones. Of course, deifying any person is a horrible error. We have been given warning. We are more knowledgeable. We are aware of this. They argue, they are depressed, they regret their most important choices, they are weak and hungry, they can be violent, and they can be as ridiculous as we can because they are clay, just like us. But. But. However, they produce something incredible. They give birth to something that may not exist before them and couldn’t occur without. They are the inspirations ‘ parents. And I suppose I should add that they are the mother of technology because it’s just lying it. Ba ho bum! That’s done, I suppose. Continue.

Because we compare our personal small accomplishments to those of the great ones, artists denigrate them. Wonderful video I‘m not Miyazaki, so I‘m not. That is glory right then. That is glory directly from God’s heart. I created this drained tiny thing. It essentially fell off the back of the pumpkin truck. And the carrots weren’t actually new.

Designers is aware that they are at best Salieri. That is what Mozart’s creatives do, also.

I am imaginative. I haven’t worked in advertising in 30 years, but my previous artistic managers have been the ones who make my decisions. They are correct in doing so. My mind goes blank when it really counts because I’m too sluggish and complacent. No medication is available to treat innovative function.

I am imaginative. Every experience I create has the potential to make Indiana Jones look older while snoring in a deck head. The more I pursue my creative endeavors, the faster I progress in my work, and the more I slog through lines and gaze blankly before beginning that task.

I can move ten times more quickly than those who aren’t creative, those who have just been creative for a short while, and those who have only been creative for a short time in their careers. Only that I work twice as quickly as they do, putting the work away, just before I do it, When I put my mind to it, I am so confident in my ability to do a great career. I have an addiction to the delay jump. The leap also terrifies me.

I don’t create art.

I am imaginative. never a performer. Though as a child, I had a dream that I would one day become that. Some of us criticize our abilities and fear our own accomplishments because we are not Michelangelos and Warhols. That is narcissism, but at least we aren’t in elections.

I am imaginative. Despite my belief in reason and science, I make decisions based on my own senses and instincts. And bear witness to what comes next, both the successes and the disasters.

I am imaginative. Every term I’ve said these may irritate another artists who have different viewpoints. Ask a question to two designers, and you’ll find three responses. No matter how we does think about it, our debate, our passion for it, and our responsibility to our own truth, at least in my opinion, are the best indications that we are creative.

I am imaginative. I lament my lack of taste in almost all of the areas of human understanding that I know very little about. And I put my ego before everything else in the areas that are most important to me, or perhaps more precisely, to my obsessions. Without my passions, I had probably have to spend time staring living in the eye, which almost none of us can do for very long. No seriously. Actually, no. Because so much in existence is intolerable if you really look at it.

I am imaginative. I think that when I leave, a small portion of me will stay in someone else’s head, just like a parent does.

Working frees me from worrying about my job.

I am imaginative. I fear that my little product will disappear without warning.

I am imaginative. I’m too busy making the next thing to devote too much time to it, especially since practically everything I create did achieve the level of success I conceive of.

I am imaginative. I think that approach is the greatest secret. I think it is so important that I’m actually foolish enough to publish an essay I wrote into a small machine without having to go through or edit it. I swear I didn’t accomplish this frequently. But I did it right away because I was even more frightened of forgetting what I was saying because I was afraid of you seeing through my sad movements toward the wonderful.

There. I believe I said it correctly.